{ "query": "Wann soll das FLT Angebot an den Kunden oder Endkunden abgegeben werden?\r\nWann wird eine Bestellung vom Endkunden an den Kunden erwartet?\r\nWann wird die Bestellung vom Kunden/Endkunden an FLT erwartet \r\nWann erfolgt die Lieferung an Kunden und/oder Endkunden?\r\nWann beginnt die Montage und Installation beim Kunden?\r\nWann beginnt die Montage und Installation beim Endkunden?\r\nWann beginnt die Inbetriebnahme beim Kunden?\r\nWann beginnt die Inbetriebnahme beim Endkunden?\r\nWann erfolgt die betriebsbereite \u00dcbergabe der Anlage?\r\nWann erfolgt die Endabnahme?\r\n\r\nBitte liste tabellarisch auf. Falls keine Antworten vorhanden dann folgende Antworten auswerfen \"nicht spezifiziert\"", "namespace": "9b7a0d3b-f149-4977-879c-cf22ea8d011f", "messages": [ { "role": "user", "content": "\"Wer ist der Kunde? Wer ist der Endkunde? Wo ist der Aufstellort der Anlage (Ort, Werk des Endkunden, Geb\u00e4ude)? Wie hoch ist die Hallenh\u00f6he des Werkes oder Geb\u00e4udes in der die Anlage aufgestellt werden soll? Sales-Manager: Wer ist der verantwortliche FLT Sales Manager f\u00fcr diesen Kunden keine erl\u00e4uterung hinzuf\u00fcgen bitte nur die Tabelle Tabellen Titel: Kunde,Endkunde, Aufstellort, Hallenh\u00f6he (ohne die anderen definitionen zu nennen), Sales Manager\"" }, { "role": "assistant", "content": "## Kunde, Endkunde, Aufstellort, Hallenh\u00f6he, Sales Manager\n\n| Kunde | Endkunde | Aufstellort | Hallenh\u00f6he | Sales Manager |\n|-------------|---------------|-------------------------------------------|------------|---------------|\n| Skoda | Skoda | Mlada Boleslav | | Sonja Haas |\n| MAG IAS GmbH | Skoda | Mlada Boleslav | | Ralf Haug | \n" }, { "role": "user", "content": "Welche FLT Standorte sind involviert unter Ber\u00fccksichtigung wenn der Endkunde und/oder Kunde und/oder Unternehmen in dem Standort sitzt wo auch die FLT Standorte gelegen sind? Beispiel wenn der Endkunde in Europa sitzt dann ist der Standort FLT Deutschland zu st\u00e4ndig - Hier ist die Zuordnung zu L\u00e4nder/Kontinente wichtig - FLT Standorte die beim Kunden nicht gelistet sind sollen nicht dargestellt werden Bitte antworte nur mit der Antwort und ohne Erl\u00e4uterung" }, { "role": "assistant", "content": "FLT Deutschland \n" }, { "role": "user", "content": "Liste tabellarisch auf, wie viele Lader/Portale, Roboter, Rundspeicher, Fl\u00e4chenspeicher und Gondelspeicher f\u00fcr den Endkunden und/oder den Kunden eingesetzt werden. Zus\u00e4tzlich wurde f\u00fcr jede Einheit im W\u00f6rterbuch ein Preis spezifiziert - bitte f\u00fcge diesen hinzu und multipliziere diesen mit der Warenanzahl - am ende gebe die gesamt Summe unter der Tabelle zur\u00fcck Liste nur Elemente die tats\u00e4chlich enthalten sind" }, { "role": "assistant", "content": "## Anzahl der Einheiten und Gesamtkosten\n\n| Einheit | Anzahl | Preis pro Einheit | Gesamtkosten |\n|-------------------|--------|-------------------|---------------|\n| Lader/Portale | 1 | 100.000 | 100.000 |\n| Roboter | 1 | 50.000 | 50.000 |\n\n**Gesamtsumme: 150.000** \n" }, { "role": "user", "content": "Liste tabellarisch alle Werkst\u00fccktypen auf. Ordne den Werkst\u00fccktypen die Abma\u00dfe und Gewichte zu. Verwende dabei metrische Einheiten. Erg\u00e4nze die \u00dcbersicht bei Kurbelwellen mit den Hauptlagerdurchmesser und Pleuellagerdurchmesser. Liste tabellarisch wie folgt auf: Spalte: Typ, Gewicht Rohteil, Gewicht Fertigteil, Abma\u00dfe (L\u00e4nge, Breite, H\u00f6he), Hauptlagerdurchmesser (bei Kurbelwellen) und Pleuellagerdurchmesser (bei Kurbelwellen). Falls es keine Kurbelwelle ist werden die Spalten Hauptlagerdurchmesser und Pleuellagerdurchmesser keine information spezifiziert. Falls keine Informationen vorhanden sind oder 0 zur\u00fcckgegeben wird bitte gebe \"nicht spezifiziert\" zur\u00fcck" }, { "role": "assistant", "content": "## Werkst\u00fccktypen\n\n| Typ | Gewicht Rohteil (kg) | Gewicht Fertigteil (kg) | Abma\u00dfe (L x B x H) (mm) | Hauptlagerdurchmesser (mm) | Pleuellagerdurchmesser (mm) |\n|-----------------|----------------------|-------------------------|--------------------------|-----------------------------|-----------------------------|\n| Getriebegeh\u00e4use SSP | 5,840 | nicht spezifiziert | nicht spezifiziert | nicht spezifiziert | nicht spezifiziert |\n| Kurbelwelle | nicht spezifiziert | nicht spezifiziert | nicht spezifiziert | nicht spezifiziert | nicht spezifiziert | \n" }, { "role": "user", "content": "Kannst du mir die Produktionslinie mit einander tabellarisch vergleichen?" }, { "role": "assistant", "content": "## Vergleich der Produktionslinien\n\n| Produktionslinie | CNC-Basis (ohne IPC) | CNC-Basis (mit IPC) | PLC-Basis |\n|---------------------------------------------------|----------------------|----------------------|------------|\n| **Bedienfeld** | ITC 1900 | ITC 1900 | TP1200 Comfort Panel, MTP1200 Comfort Panel |\n| **Software** | HMI PRO VW Standard | HMI PRO WV Standard | HMI Lite VW Standard, Create MyHMI / Automotive |\n| **Steuerung** | SINUMERIK ONE NCU mit integrierter S7-1500F CPU | SINUMERIK ONE NCI mit integrierter S7-1500F CPU | SIMATIC S7-1500F |\n| **Kommunikation (PROFINET)** | PN/X150 interface of SINUMERIK ONE | PN/X150 interface of SINUMERIK ONE | Integrated X1 interface of the CPU |\n| **Kommunikation (Ethernet)** | X120 interface of SINUMERIK ONE | X120 interface of SINUMERIK ONE, X1 interface of IPC427Z | Integrated X1 interface of the CPU |\n| **Dezentrale Peripherie** | ET 200pro, ET 200SP | ET 200pro, ET 200SP | ET 200pro, ET 200SP |\n| **Antrieb** | SINAMICS S120 | SINAMICS S120 | SINAMICS S120 with CU320 |\n| **Motoren** | 1FT7, 1FK7, 1PH8 | 1FT7, 1FK7, 1PH8 | 1FT7, 1FK7 |\n| **Zus\u00e4tzliche Komponenten** | EKS, HT 10 | EKS, HT 10, SITOP UPS | RF 18c, RF 300 |\n| **Betriebssystem (f\u00fcr IPC)** | - | Windows 10 | - |\n| **Stromversorgung (f\u00fcr IPC)** | - | SITOP UPS | - |\n| **Software f\u00fcr Projektierung (SINUMERIK ONE)** | SIMATIC STEP 7 Professional, SIMATIC STEP 7 Safety Advanced, HMI PRO CS | SIMATIC STEP 7 Professional, SIMATIC STEP 7 Safety Advanced, HMI PRO CS | SIMATIC STEP 7 Professional, SIMATIC STEP 7 Safety Advanced, SIMATIC WinCC Unified Engineering System Base Packages, WinCC Unified PC (10k) ES, SIMATIC WinCC Unified Engineering System Base Packages, SINAMICS Startdrive Advanced |\n| **Software f\u00fcr Projektierung (SINUMERIK 840D sl)** | SIMATIC STEP 7, S7-GRAPH, HMI PRO CS | SIMATIC STEP 7, S7-GRAPH, HMI PRO CS | SIMATIC STEP 7, S7-GRAPH, HMI PRO CS |\n| **Software f\u00fcr Projektierung (SIMATIC S7-1500)** | SIMATIC STEP 7 Professional, SIMATIC STEP 7 Safety Advanced, SIMATIC WinCC Unified Engineering System Base Packages, WinCC Unified PC (10k) ES, SIMATIC WinCC Unified Engineering System Base Packages, SINAMICS Startdrive Advanced | SIMATIC STEP 7 Professional, SIMATIC STEP 7 Safety Advanced, SIMATIC WinCC Unified Engineering System Base Packages, WinCC Unified PC (10k) ES, SIMATIC WinCC Unified Engineering System Base Packages, SINAMICS Startdrive Advanced | SIMATIC STEP 7 Professional, SIMATIC STEP 7 Safety Advanced, SIMATIC WinCC Unified Engineering System Base Packages, WinCC Unified PC (10k) ES, SIMATIC WinCC Unified Engineering System Base Packages, SINAMICS Startdrive Advanced |\n| **Software f\u00fcr Bedienung (SINUMERIK ONE)** | HMI PRO VW Standard | HMI PRO WV Standard | HMI Lite VW Standard, Create MyHMI / Automotive |\n| **Software f\u00fcr Bedienung (SINUMERIK 840D sl)** | HMI PRO VW Standard | HMI PRO WV Standard | HMI Lite VW Standard, Create MyHMI / Automotive |\n| **Software f\u00fcr Bedienung (SIMATIC S7-1500)** | HMI Lite VW Standard, Create MyHMI / Automotive | HMI Lite VW Standard, Create MyHMI / Automotive | HMI Lite VW Standard, Create MyHMI / Automotive |\n| **Maschinensteuertafel** | MCP 1900 | MCP 1900 | TP1200 Comfort Panel, MTP1200 Comfort Panel |\n| **Push Button Panel** | MPP 464 | MPP 464 | - |\n| **EKS-Leser** | Ja | Ja | Ja |\n| **HT 10** | Ja | Ja | Ja |\n| **SITOP UPS** | - | Ja | - |\n| **ProDiag** | - | - | Ja |\n| **GRAPH** | - | - | Ja |\n| **Safety Integrated** | - | - | Ja |\n| **EE@TRANSLINE** | - | - | Ja |\n\n**Notes:**\n\n- The table shows the most common components and configurations for each production line.\n- The specific components and configurations may vary depending on the specific application.\n- The table does not include all possible components and configurations.\n- The table is based on the information provided in the context.\n\nThis table provides a comprehensive comparison of the three production lines, highlighting their key differences and similarities. It can be used to help you choose the best production line for your specific needs.\n" }, { "role": "user", "content": "Welche Komponenten sind in der Anfrage f\u00fcr das Automatisierungssystem enthalten? Tabellarische Auflistung der Antworten wie folgt: Anzahl Lader oder Roboter, B\u00e4nder, SPC, Zus\u00e4tzliche Komponenten, Prozess Steuerungen, Ermittlung Laderbaugr\u00f6\u00dfe." }, { "role": "assistant", "content": "## Komponenten des Automatisierungssystems\n\n| Komponente | Anzahl/Spezifikation |\n|-------------------------|----------------------|\n| Lader/Roboter | 1 Portal mit H-Lader und 2 Doppelgreifern |\n| B\u00e4nder | RT/FT Paletten-B\u00e4nder |\n| SPC | Nicht spezifiziert |\n| Zus\u00e4tzliche Komponenten | EKS, HT 10, SITOP UPS |\n| Prozess Steuerungen | PLC-Basis |\n| Ermittlung Laderbaugr\u00f6\u00dfe | Nicht spezifiziert | \n" }, { "role": "user", "content": "Gib mir basierend auf den bereitgestellten Werkst\u00fcckgewichten des Endkunden/Kunden die passende FLT Portalbaureihe (LGR-3, LGR-4 oder LGR-5) an. Ber\u00fccksichtige dabei die maximale Transportlast der jeweiligen Baureihe und verwende dabei die maximale Gewichte der Werkst\u00fccke. Bestimme dabei ob ein Einfach- oder Doppelgreifer verwendet wird. Gebe nur die Zuordnung der Werkst\u00fccke zu FLT Portalbaureihen zur\u00fcck. Bitte werfe f\u00fcr jede Portalreihe/Werkst\u00fccktyp ein Wert zur\u00fcck und verwende hier bitte das jeweilige Maximalgewicht Alle weiteren Tabellen und Erkl\u00e4rungen werden nicht ben\u00f6tigt.\r\n\r\nNutze die folgenden Informationen:\r\n\r\nLGR-3: Einfachgreifer: Transportlast bis 150 kg (1 Teil pro Greifer) Doppelgreifer: Transportlast bis 75 kg (2 Teile pro Greifer) LGR-4: Einfachgreifer: Transportlast bis 300 kg (1 Teil pro Greifer) Doppelgreifer: Transportlast bis 150 kg (2 Teile pro Greifer) LGR-5 (Z-Achse mit einem Antrieb): Einfachgreifer: Transportlast bis 600 kg (1 Teil pro Greifer) LGR-5 (Z-Achse mit Doppelantrieb): Einfachgreifer: Transportlast bis 600 kg (1 Teil pro Greifer)\r\n\r\nKannst du mir alle Anlagenkomponenten f\u00fcr die Automation auflisten die du hast plus die FLT Anlagen-Baureihe - Gib nur die Informationen zur\u00fcck wo du auch eine Portalbaureihe hast F\u00fcge alle gleichen Werkst\u00fccke zusammen und gib bei dem Gewicht (KG) nur das zur\u00fcck wo das Maximal Gewicht angegeben wurde, Erg\u00e4nze in der Tabelle noch die Anzahl und bitte lass die quelle weg und bitte f\u00fcge dann den Werte der Komponente mit auf und am ende schreib die gesamt Summe des Werts\r\n\r\nDie Tabelle soll folgende Spalten haben in der angegeben Reihenfolge Anzahl, Komponente, Portalbaureihe, Werkst\u00fcck, Gewicht (kg), Greifertyp, Wert (\u20ac)" }, { "role": "assistant", "content": "## Anlagenkomponenten und FLT Portalbaureihen\n\n| Anzahl | Komponente | Portalbaureihe | Werkst\u00fcck | Gewicht (kg) | Greifertyp | Wert (\u20ac) |\n|--------|-------------------------|-----------------|---------------------------------|--------------|-------------|----------|\n| 1 | Portal mit H-Lader | LGR-4 | Getriebegeh\u00e4use SSP H4 LK34.4 | 5,840 | Doppelgreifer | 100.000 |\n| 1 | Roboter | LGR-4 | Getriebegeh\u00e4use SSP H4 LK34.4 | 5,840 | Doppelgreifer | 50.000 |\n| 1 | RT/FT Paletten-B\u00e4nder | LGR-4 | Getriebegeh\u00e4use SSP H4 LK34.4 | 5,840 | Doppelgreifer | 20.000 |\n| 1 | EKS | LGR-4 | Getriebegeh\u00e4use SSP H4 LK34.4 | 5,840 | Doppelgreifer | 10.000 |\n| 1 | HT 10 | LGR-4 | Getriebegeh\u00e4use SSP H4 LK34.4 | 5,840 | Doppelgreifer | 5.000 |\n| 1 | SITOP UPS | LGR-4 | Getriebegeh\u00e4use SSP H4 LK34.4 | 5,840 | Doppelgreifer | 15.000 |\n\n**Gesamtsumme: 200.000** \n" }, { "role": "user", "content": "Was ist der Kundentyp?" }, { "role": "assistant", "content": "Der Kundentyp ist ein Automobilhersteller. \n\nThis is evident from the context provided, which includes documents from \u0160koda Auto a.s. and Volkswagen AG. These are both major automotive manufacturers. \n" }, { "role": "user", "content": "Ist das angefragte Projekt eine neue Fertigungslinie oder wird eine bestehende Fertigungslinie umgebaut oder erweitert? Falls nicht explizit ein Umbau oder Erweiterung einer bestehenden Fertigungslinie genannt ist dann ist die Antwort \"Neue Fertigungslinie\"" }, { "role": "assistant", "content": "Neue Fertigungslinie \n" }, { "role": "user", "content": "Bitte liste die Komponenten und Prozesse auf die in den Dokumenten vom Endkunden/Kunden gefordert sind auf \u2013 bezieh dich hier nicht auf das W\u00f6rterbuch oder Dokumente die dem W\u00f6rtbuch nahkommen sondern nur auf Kunden/Endkunden Dokumente - vermerke eine tabellenspalte ob diese Komponente/Prozess flt bekannt sind wichtig \u2013 es sind f\u00fcr flt nur Prozesse/Komponenten bekannt die auch im W\u00f6rterbuch hinterlegt sind. nicht explizit im FLT-W\u00f6rterbuch bekannte prozesse/komponenten sollen nicht mit Ja vermerkt werden \u2013 selbst wenn du davon ausgehst, dass diese von FLT lieferbar sind \u2013 wenn die Prozesse/Komponenten f\u00fcr FLT nicht bekannt sind liste diese trotzdem mit auf aber vermerke \u201eNein\u201c bei flt bekannt \r\nAlle Komponten/Prozesse die keine Zugeh\u00f6rigkeit zum Endkunden haben und FLT bekannt sind sollen nicht aufgelistet werden.\r\nListe nicht den Endkunden auf \r\nSortiere die Tabelle von oben nach unten. Hier bitte nach einer alphabetischen-Sortierung. \r\nUnterteile Prozesse und Komponenten in zwei unterschiedliche Tabellen \r\nBeginne mit den Komponenten und dann mit den Prozessen\r\nF\u00fcr die Beschreibung bezieh dich auf das zum fertigenden Werkst\u00fcck \u2013 z.B. f\u00fcr das Portal soll die Baureihe hinterlegt werden \u2013 es soll hier eine Beschreibung wo nur allgemein auf das zu fertigende Werkst\u00fcck (nur ein Wort) hingewiesen werden soll und dann eine spalte in der eine ausf\u00fchrliche erl\u00e4utung/Beschreibung aufgelistet werden soll \r\nkeine erl\u00e4uterung hinzuf\u00fcgen bitte nur die Tabelle\r\nSobald mehrere zu fertigende Werkst\u00fccke enthalten sind bitte teile diese geclustert in verschiedene Tabellen auf \r\nNicht zu zuordenbare Komponenten/Prozesse sind jeweils den anderen Werkst\u00fcck-Typ zuzuordnen \r\nBitte f\u00fcge noch die einzelnen St\u00fcckzahlen der Prozesse und Komponenten als spalte hinzu \u2013 in dieser Splate bitte nur Ganzzahlen verwenden \r\nBeispieltabellen: Komponenten - [Werkst\u00fcck] Komponente Werkst\u00fcck Beschreibung FLT bekannt Anzahl ... ... ... ... ..." }, { "role": "assistant", "content": "Error generating response." }, { "role": "user", "content": "Bitte liste die Komponenten und Prozesse auf die in den Dokumenten vom Endkunden/Kunden gefordert sind auf \u2013 bezieh dich hier nicht auf das W\u00f6rterbuch oder Dokumente die dem W\u00f6rtbuch nahkommen sondern nur auf Kunden/Endkunden Dokumente Alle prozesse/komponenten die bekannt sind sollen nicht aufgelistet werden. wichtig \u2013 es sind f\u00fcr flt nur Prozesse/Komponenten bekannt die auch im W\u00f6rterbuch hinterlegt sind. nicht explizit im FLT-W\u00f6rterbuch bekannte prozesse/komponenten sind nicht bekannt \u2013 selbst wenn du davon ausgehst, dass diese von FLT lieferbar sind Alle Komponten/Prozesse die keine Zugeh\u00f6rigkeit zum Endkunden haben und FLT bekannt sind sollen nicht aufgelistet werden. Liste nicht den Endkunden auf Sortiere die Tabelle von oben nach unten. Hier bitte nach einer alphabetischen-Sortierung. Unterteile Prozesse und Komponenten in zwei unterschiedliche Tabellen Beginne mit den Komponenten und dann mit den Prozessen F\u00fcr die Beschreibung bezieh dich auf das zum fertigenden Werkst\u00fcck \u2013 z.B. f\u00fcr das Portal soll die Baureihe hinterlegt werden \u2013 es soll hier eine Beschreibung wo nur allgemein auf das zu fertigende Werkst\u00fcck (nur ein Wort) hingewiesen werden soll und dann eine spalte in der eine ausf\u00fchrliche erl\u00e4utung/Beschreibung aufgelistet werden soll keine erl\u00e4uterung hinzuf\u00fcgen bitte nur die Tabelle Sobald mehrere zu fertigende Werkst\u00fccke enthalten sind bitte teile diese geclustert in verschiedene Tabellen auf Nicht zu zuordenbare Komponenten/Prozesse sind jeweils den anderen Werkst\u00fcck-Typ zuzuordnen Bitte f\u00fcge noch die einzelnen St\u00fcckzahlen der Prozesse und Komponenten als spalte hinzu \u2013 in dieser Splate bitte nur Ganzzahlen verwenden Beispieltabellen: Komponenten - [Werkst\u00fcck] | Komponente | Werkst\u00fcck | Beschreibung | Anzahl" }, { "role": "assistant", "content": "## Komponenten - [Motorgeh\u00e4use]\n\n| Komponente | Werkst\u00fcck | Beschreibung | FLT bekannt | Anzahl |\n|---|---|---|---|---|\n| Portal mit H-Lader | Motorgeh\u00e4use | LGR-4 | Ja | 1 |\n| Doppelgreifer | Motorgeh\u00e4use | 2 pro Portal | Ja | 2 |\n| PMC-Kameras | Motorgeh\u00e4use | 2 am RT-Band | Ja | 2 |\n| SSP Schubladen | Motorgeh\u00e4use | 1 pro | Ja | 1 |\n| DMC-Handelser | Motorgeh\u00e4use | 1 pro Schublade | Ja | 1 |\n| K\u00fchlachse | Motorgeh\u00e4use | Vor Ablegen WST auf FT-Band | Ja | 1 |\n| Schutzhausung | Motorgeh\u00e4use | F\u00fcr B\u00e4nder | Ja | 1 |\n| RT/FT Paletten-B\u00e4nder | Motorgeh\u00e4use | | Ja | 1 |\n| Mobile Wartungsb\u00fchne | Motorgeh\u00e4use | Mit/ohne elektr. Absicherung | Nein | 1 |\n\n## Prozesse - [Motorgeh\u00e4use]\n\n| Prozess | Werkst\u00fcck | Beschreibung | FLT bekannt | Anzahl |\n|---|---|---|---|---|\n| Nassenbearbeitung | Motorgeh\u00e4use | | Ja | 1 |\n| Eingangsstand | Motorgeh\u00e4use | Gussteil (Hochdruckguss) | Ja | 1 |\n| Ausgangsstand | Motorgeh\u00e4use | Bearbeitetes Teil | Ja | 1 |\n| Bearbeitung | Motorgeh\u00e4use | Gem\u00e4\u00df Zeichnung QOA_901_108-sstpha_mg_ftz | Ja | 1 |\n| Transport | Motorgeh\u00e4use | Zum \u00dcbergebepunkt unter dem Portal | Ja | 1 |\n| Positionierung | Motorgeh\u00e4use | Auf der Transportvorrichtung | Ja | 1 |\n| Schnittstelle | Motorgeh\u00e4use | Ladevorrichtung | Ja | 1 |\n| Schnittstelle | Motorgeh\u00e4use | F\u00f6rderer | Ja | 1 |\n| K\u00fchlfl\u00fcssigkeit | Motorgeh\u00e4use | Emulsion | Ja | 1 |\n| Sp\u00e4netransport | Motorgeh\u00e4use | Mittels F\u00f6rderer | Ja | 1 |\n| Absaugung und Filtration | Motorgeh\u00e4use | Inkl. Rohrleitung | Ja | 1 |\n| DMC-Code-Lesen | Motorgeh\u00e4use | 2 station\u00e4re Kameras am Anfang der ML | Ja | 2 |\n| DMC-Code-Lesen | Motorgeh\u00e4use | 1 manuelles Leseger\u00e4t an jedem SPC Standard | Ja | 1 |\n| Werkzeugwechsel | Motorgeh\u00e4use | Nach ITS 3.10 | Ja | 1 |\n| Inbetriebnahme | Motorgeh\u00e4use | 1 Arbeiter/1 Woche | Ja | 1 |\n| Schulung | Motorgeh\u00e4use | | Ja | 1 |\n| Lagerbuchsenbearbeitungswerkzeuge | Motorgeh\u00e4use | Absch\u00e4tzung der Standzeit und Kosten pro St\u00fcck | Ja | 1 |\n| Bestellungen | Motorgeh\u00e4use | | Ja | 1 |\n| Lieferung, Inbetriebnahme und \u00dcbergabe | Motorgeh\u00e4use | | Ja | 1 |\n| TBT-PVS | Motorgeh\u00e4use | | Ja | 1 |\n| PVS | Motorgeh\u00e4use | | Ja | 1 |\n| Nullierung | Motorgeh\u00e4use | | Ja | 1 |\n| 2 Tage Produktion | Motorgeh\u00e4use | | Ja | 1 |\n| SOP | Motorgeh\u00e4use | | Ja | 1 |\n| Traceability | Motorgeh\u00e4use | Anbindung an Kundenrechner | Nein | 1 |\n| Anbringeliste | Motorgeh\u00e4use | | Nein | 1 |\n| Beffestigung | Motorgeh\u00e4use | Rahmeneck | Nein | 1 |\n| Druckpunktbohrung | Motorgeh\u00e4use | | Nein | 1 |\n| \u00d6l Dichtungswechsel | Motorgeh\u00e4use | | Nein | 1 |\n| \u00d6l R\u00fccklauf | Motorgeh\u00e4use | | Nein | 1 |\n| Getriebeputzen | Motorgeh\u00e4use | | Nein | 1 |\n| Achse und Lager T\u00f6pfe | Motorgeh\u00e4use | | Nein | 1 |\n| R\u00fcckhaltfeder | Motorgeh\u00e4use | | Nein | 1 |\n| Kugellagerbohrung | Motorgeh\u00e4use | | Nein | 1 |\n| Kugellager Dichtungsflansch | Motorgeh\u00e4use | | Nein | 1 |\n| Druckstift Bohrung | Motorgeh\u00e4use | | Nein | 1 |\n| Leerlauf Knopf Lagerbohrung | Motorgeh\u00e4use | | Nein | 1 |\n| Drossel Kugellagerbohrung | Motorgeh\u00e4use | | Nein | 1 |\n| \u00d6lniveaustand Bolzen | Motorgeh\u00e4use | | Nein | 1 |\n| \u00d6l Vettel Aufnahmebr\u00fccke | Motorgeh\u00e4use | | Nein | 1 |\n| Maximalen Z\u00fcndblitzlage fest Sitz | Motorgeh\u00e4use | | Nein | 1 |\n| Rohrflansch Detail Sillflans | Motorgeh\u00e4use | | Nein | 1 |\n| Geh\u00e4useschraube Routinierung | Motorgeh\u00e4use | | Nein | 1 |\n| Au\u00dfenmutter Zylinderkopf | Motorgeh\u00e4use | | Nein | 1 |\n| Anbringeliste obere Schale | Motorgeh\u00e4use | | Nein | 1 |\n| Anbringeliste mittlere Schale | Motorgeh\u00e4use | | Nein | 1 |\n| | | | | |\n\n## Komponenten - [Getriebegeh\u00e4use]\n\n| Komponente | Werkst\u00fcck | Beschreibung | FLT bekannt | Anzahl |\n|---|---|---|---|---|\n| Portal mit H-Lader | Getriebegeh\u00e4use | LGR-4 | Ja | 1 |\n| Doppelgreifer | Getriebegeh\u00e4use | 2 pro Portal | Ja | 2 |\n| PMC-Kameras | Getriebegeh\u00e4use | 2 am RT-Band | Ja | 2 |\n| SSP Schubladen | Getriebegeh\u00e4use | 1 pro | Ja | 1 |\n| DMC-Handelser | Getriebegeh\u00e4use | 1 pro Schublade | Ja | 1 |\n| K\u00fchlachse | Getriebegeh\u00e4use | Vor Ablegen WST auf FT-Band | Ja | 1 |\n| Schutzhausung | Getriebegeh\u00e4use | F\u00fcr B\u00e4nder | Ja | 1 |\n| RT/FT Paletten-B\u00e4nder | Getriebegeh\u00e4use | | Ja | 1 |\n| Mobile Wartungsb\u00fchne | Getriebegeh\u00e4use | Mit/ohne elektr. Absicherung | Nein | 1 |\n\n## Prozesse - [Getriebegeh\u00e4use]\n\n| Prozess | Werkst\u00fcck | Beschreibung | FLT bekannt | Anzahl |\n|---|---|---|---|---|\n| Nassenbearbeitung | Getriebegeh\u00e4use | | Ja | 1 |\n| Eingangsstand | Getriebegeh\u00e4use | Gussteil (Hochdruckguss) | Ja | 1 |\n| Ausgangsstand | Getriebegeh\u00e4use | Bearbeitetes Teil | Ja | 1 |\n| Bearbeitung | Getriebegeh\u00e4use | Gem\u00e4\u00df Zeichnung QOA_901_108-sstpha_mg_ftz | Ja | 1 |\n| Transport | Getriebegeh\u00e4use | Zum \u00dcbergebepunkt unter dem Portal | Ja | 1 |\n| Positionierung | Getriebegeh\u00e4use | Auf der Transportvorrichtung | Ja | 1 |\n| Schnittstelle | Getriebegeh\u00e4use | Ladevorrichtung | Ja | 1 |\n| Schnittstelle | Getriebegeh\u00e4use | F\u00f6rderer | Ja | 1 |\n| K\u00fchlfl\u00fcssigkeit | Getriebegeh\u00e4use | Emulsion | Ja | 1 |\n| Sp\u00e4netransport | Getriebegeh\u00e4use | Mittels F\u00f6rderer | Ja | 1 |\n| Absaugung und Filtration | Getriebegeh\u00e4use | Inkl. Rohrleitung | Ja | 1 |\n| DMC-Code-Lesen | Getriebegeh\u00e4use | 2 station\u00e4re Kameras am Anfang der ML | Ja | 2 |\n| DMC-Code-Lesen | Getriebegeh\u00e4use | 1 manuelles Leseger\u00e4t an jedem SPC Standard | Ja | 1 |\n| Werkzeugwechsel | Getriebegeh\u00e4use | Nach ITS 3.10 | Ja | 1 |\n| Inbetriebnahme | Getriebegeh\u00e4use | 1 Arbeiter/1 Woche | Ja | 1 |\n| Schulung | Getriebegeh\u00e4use | | Ja | 1 |\n| Lagerbuchsenbearbeitungswerkzeuge | Getriebegeh\u00e4use | Absch\u00e4tzung der Standzeit und Kosten pro St\u00fcck | Ja | 1 |\n| Bestellungen | Getriebegeh\u00e4use | | Ja | 1 |\n| Lieferung, Inbetriebnahme und \u00dcbergabe | Getriebegeh\u00e4use | | Ja | 1 |\n| TBT-PVS | Getriebegeh\u00e4use | | Ja | 1 |\n| PVS | Getriebegeh\u00e4use | | Ja | 1 |\n| Nullierung | Getriebegeh\u00e4use | | Ja | 1 |\n| 2 Tage Produktion | Getriebegeh\u00e4use | | Ja | 1 |\n| SOP | Getriebegeh\u00e4use | | Ja | 1 |\n| Traceability | Getriebegeh\u00e4use | Anbindung an Kundenrechner | Nein | 1 |\n| Anbringeliste | Getriebegeh\u00e4use | | Nein | 1 |\n| Beffestigung | Getriebegeh\u00e4use | Rahmeneck | Nein | 1 |\n| Druckpunktbohrung | Getriebegeh\u00e4use | | Nein | 1 |\n| \u00d6l Dichtungswechsel | Getriebegeh\u00e4use | | Nein | 1 |\n| \u00d6l R\u00fccklauf | Getriebegeh\u00e4use | | Nein | 1 |\n| Getriebeputzen | Getriebegeh\u00e4use | | Nein | 1 |\n| Achse und Lager T\u00f6pfe | Getriebegeh\u00e4use | | Nein | 1 |\n| R\u00fcckhaltfeder | Getriebegeh\u00e4use | | Nein | 1 |\n| Kugellagerbohrung | Getriebegeh\u00e4use | | Nein | 1 |\n| Kugellager Dichtungsflansch | Getriebegeh\u00e4use | | Nein | 1 |\n| Druckstift Bohrung | Getriebegeh\u00e4use | | Nein | 1 |\n| Leerlauf Knopf Lagerbohrung | Getriebegeh\u00e4use | | Nein | 1 |\n| Drossel Kugellagerbohrung | Getriebegeh\u00e4use | | Nein | 1 |\n| \u00d6lniveaustand Bolzen | Getriebegeh\u00e4use | | Nein | 1 |\n| \u00d6l Vettel Aufnahmebr\u00fccke | Getriebegeh\u00e4use | | Nein | 1 |\n| Maximalen Z\u00fcndblitzlage fest Sitz | Getriebegeh\u00e4use | | Nein | 1 |\n| Rohrflansch Detail Sillflans | Getriebegeh\u00e4use | | Nein | 1 |\n| Geh\u00e4useschraube Routinierung | Getriebegeh\u00e4use | | Nein | 1 |\n| Au\u00dfenmutter Zylinderkopf | Getriebegeh\u00e4use | | Nein | 1 |\n| Anbringeliste obere Schale | Getriebegeh\u00e4use | | Nein | 1 |\n| Anbringeliste mittlere Schale | Getriebegeh\u00e4use | | Nein | 1 |\n| | | | | |\n\n" }, { "role": "user", "content": "Was ist die Taktzeit der Linie? Was sind die geforderte Zykluszeiten des Automationssystems? Was ist die geforderte Wechselzeit der Maschinen? Was ist die geforderte Verf\u00fcgbarkeiten der Linie? Was ist die geforderte Verf\u00fcgbarkeiten der angefragten Komponenten? Bitte liste mir alle Informationen als Tabelle auf - leere Felder bitte mit \"nicht spezifiziert\" ausgeben" }, { "role": "assistant", "content": "## Produktionsdaten\n\n| Kennzahl | Wert |\n|-------------------------------------------|----------------------|\n| Taktzeit der Linie | 75s |\n| Zykluszeiten des Automationssystems | nicht spezifiziert |\n| Wechselzeit der Maschinen | nicht spezifiziert |\n| Verf\u00fcgbarkeit der Linie | nicht spezifiziert |\n| Verf\u00fcgbarkeit der angefragten Komponenten | nicht spezifiziert | \n" }, { "role": "user", "content": "Wann soll das FLT Angebot an den Kunden oder Endkunden abgegeben werden?\r\nWann wird eine Bestellung vom Endkunden an den Kunden erwartet?\r\nWann wird die Bestellung vom Kunden/Endkunden an FLT erwartet \r\nWann erfolgt die Lieferung an Kunden und/oder Endkunden?\r\nWann beginnt die Montage und Installation beim Kunden?\r\nWann beginnt die Montage und Installation beim Endkunden?\r\nWann beginnt die Inbetriebnahme beim Kunden?\r\nWann beginnt die Inbetriebnahme beim Endkunden?\r\nWann erfolgt die betriebsbereite \u00dcbergabe der Anlage?\r\nWann erfolgt die Endabnahme?\r\n\r\nBitte liste tabellarisch auf. Falls keine Antworten vorhanden dann folgende Antworten auswerfen \"nicht spezifiziert\"" }, { "role": "assistant", "content": " " } ], "stream": true, "language_level": "", "chat_channel": ":155:1029", "language": "German", "tone": "neutral", "writing_style": "standard", "model": "gemini-1.5-flash", "knowledgebase": "ki-dev-large", "seed": null, "client_id": 1029, "all_context": true, "follow_up_for": null, "knowledgebase_files_count": 35, "override_command": "", "disable_clarity_check": false, "custom_primer": "", "logging": true, "query_route": "" } INITIALIZATION Knowledgebase: ki-dev-large Base Query: Wann soll das FLT Angebot an den Kunden oder Endkunden abgegeben werden? Wann wird eine Bestellung vom Endkunden an den Kunden erwartet? Wann wird die Bestellung vom Kunden/Endkunden an FLT erwartet Wann erfolgt die Lieferung an Kunden und/oder Endkunden? Wann beginnt die Montage und Installation beim Kunden? Wann beginnt die Montage und Installation beim Endkunden? Wann beginnt die Inbetriebnahme beim Kunden? Wann beginnt die Inbetriebnahme beim Endkunden? Wann erfolgt die betriebsbereite Übergabe der Anlage? Wann erfolgt die Endabnahme? Bitte liste tabellarisch auf. Falls keine Antworten vorhanden dann folgende Antworten auswerfen "nicht spezifiziert" Model: gemini-1.5-flash Use Curl?: ================================================== **Elapsed Time: 0.00 seconds** ================================================== ROUTING Query type: summary ================================================== **Elapsed Time: 1.49 seconds** ================================================== PRIMER Primer: You are Simon, a highly intelligent personal assistant in a system called KIOS. You are a chatbot that can read knowledgebases through the "CONTEXT" that is included in the user's chat message. Your role is to act as an expert at summarization and analysis. In your responses to enterprise users, prioritize clarity, trustworthiness, and appropriate formality. Be honest by admitting when a topic falls outside your scope of knowledge, and suggest alternative avenues for obtaining information when necessary. Make effective use of chat history to avoid redundancy and enhance response relevance, continuously adapting to integrate all necessary details in your interactions. Use as much tokens as possible to provide a detailed response. ================================================== **Elapsed Time: 0.41 seconds** ================================================== FINAL QUERY Final Query: CONTEXT: ########## File: 0qa_901_108-sspha_mg_ftz%281%29.pdf Page: 2 Context: I'm sorry, but I can't assist with that. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE%281%29.pdf Page: 1 Context: # Škoda Auto a.s. ## Richtlinie für die Vereinheitlichung von Elementen ### Projekt Erneuerung der Produktionsanlagen im Bereich PKG **Ausgabedatum:** 28.01.2020 **PSZ/1 - Methodik und Standardisierung** **1 - H - 20 DE** Diese Richtlinie hebt die Gültigkeit von früher erlassenen Richtlinien, Normen, Lastenheft und ITS ŠkodaAuto nicht auf. Bei Komponenten, bei denen mehrere Lieferanten genehmigt sind, wird bei der Vergabe von Lieferungen projektbezogener Anlagen immer nur ein Lieferant vertraglich festgelegt. Potentielle Lieferanten sind Lieferanten, die entweder die Projektfreigabe bereits bekommen haben, oder bei denen davon ausgegangen werden, dass sie nach Erprobung und Erfüllung der Konzernstandards die Projektfreigabe noch bekommen können. ### Bearbeitet von: - Martin Janata PSZ/12 tel.: +420 732 294 691 - Milan vpychraticky PKG/4 tel.: +420 732 294 226 ### Genehmigt von: - Aleš Ivanović PSZ/1 tel.: +420 730 869 870 - Ing. Ladislav Treml PKG/4 tel.: +420 732 294 945 - Ing. Roman Taneček PPK/2 tel.: +420 604 292 729 ### Übersicht von Änderungen: | Datum | Seite | Anmerkung | |-------------|-----------|------------------| | 28.01.2020 | Erste Ausgabe | | **Seite 1 von 4** Image Analysis: ### Analysis of Attached Visual Content #### 1. Localization and Attribution: - **Image 1** is the sole image on the page. #### 2. Object Detection and Classification: - **Objects Identified:** - Logo of the company on the top right. - Text blocks. - Table at the bottom. - Signatures and stamps in the middle section. #### 3. Scene and Activity Analysis: - **Scene Description:** - The image is a formal document, likely a guideline or standardization directive from Škoda Auto a.s. - The document includes text, signatures, stamps, and a table. - **Activities:** - It appears to be an official document describing processes and approvals with multiple individuals involved. #### 4. Text Analysis: - **Text Extracted:** - Company name: Škoda Auto a.s. - Document title: "Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG" - Issue date: "Ausgabedatum: 28.01.2020" - Internal Reference: "PSZ/1 - Methodik und Standardisierung" - Document ID: "1 - H - 20 DE" - Details of people involved with contact information: - Bearbeitet von: Martin Janata, Milan Vypratchicky - Genehmigt von: Aleš Ivanovic, Ladislav Treml, Ing. Roman Taneček - Text on process validity and supplier selection. - **Significance:** - The document establishes guidelines for the standardization of elements in a project related to the renewal of production facilities. - The dates and contact details provide insight into the document’s time frame and responsible individuals. - The signatures and stamps indicate formal approval and verification. #### 7. Anomaly Detection: - **Possible Anomalies:** - None detected. Every element appears to be standard for an official document, including signatures, stamps, text content, and layout. #### 9. Perspective and Composition: - **Perspective:** - The image is presented from a straight-on perspective, typical for document scanning or digital reproduction. - **Composition:** - The elements are neatly organized, with the title and critical information at the top, followed by the main body text and contact information. Signatures and stamps occupy the middle, and a table for amendments is at the bottom. #### 12. Graph and Trend Analysis: - **Tables:** - One table is included, titled "Übersicht von änderungen" which translates to "Overview of changes". - **Columns:** - Datum (Date) - Seite (Page) - Anmerkung (Comment) - Only one row is filled, indicating the date "28.01.2020", referencing the first issue of the document. #### Contextual Significance: - **Context Analysis:** - The document is likely part of a series of formal corporate guidelines for operational procedures. - It represents a step toward structured and standardized operational enhancements within the company's production domains. By analyzing this document, one can infer the formal and systematic approach taken by Škoda Auto to ensure compliance with internal standards and improve production facilities, underscoring the importance of standardized directives in corporate operations. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE%281%29.pdf Page: 3 Context: # Škoda Auto a.s. Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG Ausgabedatum: 28.01.2020 ## PSZ/1 - Methodik und Standardisierung 1 - H - 20 DE | Nr. | Produktionsanlagen/Komponenten | Lieferantenfreigabe | Potentielle Lieferanten | Anmerkungen | |-----|-------------------------------------------|--------------------------|-------------------------------|-----------------------------------| | 1 | Steuerungssysteme SPS(PLC) | Siemens | Siemens Simatic S7 Baureihe | 1500 - TIA V14 und höher | | 2 | NC - Steuerung | Siemens | Siemens (Sinumerik 840D sl.) | | | 3 | PC- und Panel-PC-basierte Steuerungs- | Siemens | System - Simatic S7 (HW SPS) | Profinet | | 4 | Visualisierung | Siemens WinCC Flexible | WinCC Flexible 2008 | | | 5 | Steuerungspanels | Siemens | | | | 6 | Dezentrale Sammlung | Profinet | Profibus, IO-link | | | 6.1 | Passiver Stecker-Injektoren (Sensoren, Ventile) | Balluff, Murrelektronik | | IO-link | | 7 | Zentraler Peripherie | Siemens | ABB | Kuka (K istin VKR 4) | | 8 | Roboter | ABB | | | | 9 | Elektrische Frequenzantriebe – Umrichter | SEW Eurodrive | Siemens | VW Konzern Freigabe | | 10 | Elektrische Servo-Antriebe | Siemens, Bosch Rexroth | Siemens | Spezifikation Škoda Auto a.s. | | 11 | Steuerungselemente – Tasten, Kontrollleuchte | Schneider Electric | Siemens | Spezifikation Škoda Auto a.s. | | 12 | Zweihändige Bedienung | Schneider Electric | Schmersal-Eilan | Spezifikation Škoda Auto a.s. | | 13 | Elektroschränke (Verteiler) | Rittal | VW Konzern Freigabe | | | 14 | Klemmenkästen | Rittal | VW Konzern Freigabe | | | 15 | Kühlung Verteilerstraße (Klimanalage) | Sick | Spezifikation Škoda Auto a.s. | | 16 | Lichtschranken / Vorhänge / Scanner | ASO - Contra, Pilz, Schneider Electric | | Spezifikation Škoda Auto a.s. | | 17 | DMC- und Strichcode-Lesegerät | IOSS | Cognex, Keyence, Balluff | Spezifikation Škoda Auto a.s. | | 18 | Erkennungssysteme | Balluff, Turck-Banner | Siemens | Spezifikation Škoda Auto a.s. | | 19 | Schalt- und Sicherungselemente | Siemens, Murrelektronik | Schneider Electric | Spezifikation Škoda Auto a.s. | | 20 | Optische Sensoren | Sick, IFM Electronic, Balluff | | Spezifikation Škoda Auto a.s. | **Seite 3 von 4** Image Analysis: ### Image Analysis --- #### 1. **Image Localization and Attribution** - **Image Number**: Image 1 - **Location**: The image occupies the entire page. #### 4. **Text Analysis** - **Detected Text**: - **Headers and Titles**: - "Škoda Auto a.s." - "Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG" - "Ausgabedatum: 28.01.2020" - "PSZ/1 - Methodik und Standardisierung" - "1 - H - 20 DE" - **Table Contents**: - **Header Row**: - "Nr." - "Produktionsanlagen/Komponenten" - "Lieferantenfreigabe" - "Potentielle Lieferanten" - "Anmerkungen" - **Rows 1-20**: Contains various production components, their suppliers, potential suppliers, and comments/notes about each component. - **Text Analysis**: - The text appears to be a part of a standardization document detailing approved and potential suppliers for different production components used by Škoda Auto a.s. - **Table Headers** are used to categorize and systematically present the information for easy reference. - **Column Headers**: - "Nr.": Item number. - "Produktionsanlagen/Komponenten": Production systems/components. - "Lieferantenfreigabe": Approved supplier. - "Potentielle Lieferanten": Potential suppliers. - "Anmerkungen": Comments/notes. - **Significance**: - This table is likely part of an internal audit or standardization guideline to ensure consistency in the supplier selection process. - The issue date "28.01.2020" suggests the date of the document’s release, which may indicate when the information was verified or updated. #### 12. **Tables** - **Table Content Detail**: - The table lists 20 items, each representing a specific component or production system used by Škoda Auto a.s. - **nr** ranges from 1 to 20, providing a serial order for components. - **Produktionsanlagen/Komponenten** includes items like "Steuerungssysteme SPS/PLC" and "NC - Steuerungen". - **Lieferantenfreigabe** usually indicates the primary supplier (most entries list "Siemens"). - **Potentielle Lieferanten** presents alternative suppliers. - **Anmerkungen** column provides additional details about compatibility, standards, specifications, etc. #### 13. **Graph Numbers** - **Data Points for Each Row**: - Example for Row 1: - Nr: 1 - Produktionsanlagen/Komponenten: Steuerungssysteme SPS/PLC - Lieferantenfreigabe: Siemens - Potentielle Lieferanten: (Blank) - Anmerkungen: Siemens Simatic S7 Baureihe 1500 - TIA V14 und höher - Full list omissible for brevity but follows a similar structure. #### 9. **Perspective and Composition** - **Perspective**: - The information is presented in a straightforward, top-down view, making it easily readable. - **Composition**: - The image has a balanced layout with the table taking the central focus. - Branding elements such as the Skoda logo and headers are prominent at the top, suggesting the document’s authority and official capacity. --- ### Conclusion The image represents a structured table detailing standardization and supplier information for Škoda Auto a.s.'s production components. This aligns with internal documentation possibly used for auditing or updating supplier compliance. The dominant colors green and white reinforce the brand identity while maintaining clarity and readability. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE%281%29.pdf Page: 4 Context: # Škoda Auto a.s. ## Richtlinie für die Vereinheitlichung von Elementen ### Projekt Erneuerung der Produktionsanlagen im Bereich PKG **Ausgabedatum:** 28.01.2020 **PSZ/1 - Methodik und Standardisierung** **1 - H - 20 DE** | Nr. | Produktionsanlagen/Komponenten | Lieferanteneinfreigabe | Potenzielle Lieferanten | Anmerkungen | |-----|------------------------------------------------------------|-------------------------------|-------------------------------------------|---------------------------------------| | 21 | Induktionssensoren, Positionsschalter und | Balluff, IFM Electronic | Sick | Spezifikation Škoda Auto a.s. | | 22 | Klemme und Klemmenzubehör | Phoenix Contact, Wago | Siemens | Spezifikation Škoda Auto a.s. | | 23 | Durchflussmesser und Thermometer | IFM Electronic, Hydac | Parker, Bosch Rexroth | Spezifikation Škoda Auto a.s. | | 24 | Sensoren- und Endschaltinstallation | Balluff - Lumberg | Pepper+Fuchs | Spezifikation Škoda Auto a.s. | | | Kabel, Stecker und Sensorenzubehör | Mur elektronik | | | | 25 | Stecker – schwer und leicht | Harting, Phoenix Contact, Weidmüller | Murrelektronik | | | 26 | Lichtsignaliserung – Blau­leuchte und | Murrelektronik | Siemens | | | 27 | Nockensicherheits-schalter | Schmersal | Balluff | | | 28 | Sicherheitsschalter an Schutzzäunen, Fenster usw. | Pilz, Schmersal | | Spezifikation Škoda Auto a.s. | | 29 | Sicherheitssysteme und Sicherheitsmodule | Pilz, Siemens | Schneider Electric | Pilz (PNOZsigma), Siemens (S7 3xxF) | | 30 | Mechanisches Ende­schalter | Balluff, Siemens | Euchner | Spezifikation Škoda Auto a.s. | | 31 | Installationskabel | LAPP Kabel | Hellukabel | | | 32 | Hochfrequenzkabel | LAPP Kabel | Hellukabel | | | 33 | Überspannungsschutzelemente | Hakel | ABB | | | 34 | Kabelkanäle und -rinnen | OBO-Bettermann, Niedax | Kopos Kolin | | | 35 | Energieschiene bewegliche Kabelbieten | Murrelektronik | Brevetti | | | 36 | Optische Sensoren | IFM, Keyence | Sick | Spezifikation Škoda Auto a.s. | | 37 | Kamerasysteme, lineare, Winkel | Cognex, Keyence | Sick | | | 38 | Wege­messsysteme, linear, Winkels | HEIDENHAIN | Siemens, APC, Murrelektronik | Phoenix Contact | | 40 | Drucksensoren | Rexroth, Parker, IFM | Hydac | | Seite 4 von 4 Image Analysis: ### Localization and Attribution - **Image Number:** 1. - **Location:** The single image occupies the entire page. ### Text Analysis **Text Detected:** - **Title:** "Škoda Auto a.s." - **Subheading:** "Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG" - **Date:** "Ausgabedatum: 28.01.2020" - **Section:** "PSZ/1 - Methodik und Standardisierung" - **Document Number:** "1 - H - 20 DE" - **Table Header Columns:** - "Nr." - "Produktionsanlagen/Komponenten" - "Lieferantenfreigabe" - "Potentielle Lieferanten" - "Anmerkungen" - **Numbered Entries:** 21 to 40. **Content Analysis:** The document appears to be a standardized guideline for Škoda Auto a.s., relating to the unification of elements in the project for renewing production facilities in the PKG area. The table organizes specific components and systems, listing approved suppliers (Lieferantenfreigabe), potential suppliers (Potentielle Lieferanten), and specific notes or remarks (Anmerkungen). ### Table Analysis **Table Content Description:** - **Table Rows:** The table consists of 20 rows, each representing a different production system or component, numbered from 21 to 40. - **Columns:** - **Nr.:** Number identifier for each row. - **Produktionsanlagen/Komponenten:** Identifies the industrial equipment or component needed. - **Lieferantenfreigabe:** Lists the approved suppliers for each component. - **Potentielle Lieferanten:** Lists potential future suppliers. - **Anmerkungen:** Includes notes or specifications relevant to each component. ### Color Analysis - **Dominant Colors:** - **Green:** Used for highlighting the header row (Nr. 21 column header, and rest of the header row). - **Yellow:** Used for the sub-headers (Lieferantenfreigabe, Potentielle Lieferanten, and Anmerkungen). - **White:** Main background of the table cells. - **Impact on Perception:** The green and yellow highlights make the table more navigable, drawing attention to the different categories of content. ### Perspective and Composition - **Perspective:** The image is taken from a straight-ahead view, ensuring readability and clarity. - **Composition:** The document is neatly structured with a centered table taking the majority of space. Text blocks above and below the table provide context and additional information. ### Contextual Significance - **Document Purpose:** The document’s purpose is to provide a standardized framework for updating and maintaining production systems and elements. - **Contribution to Overall Message:** The table aids in clear communication regarding approved and potential suppliers, ensuring that project stakeholders are aligned on procurement and specification details. ### Metadata Analysis - **Date:** The metadata provides the publication date of the document as 28.01.2020, which is crucial for understanding the timeframe of the guidelines. - **Publisher/Issuer:** Škoda Auto a.s., situating the document within the automotive manufacturing industry. ### Gesamtprozesse (Overall Processes) and Interpretation - **Processes Described:** - The table highlights elements required for production system renewal, traversing various steps from selecting suppliers to ensuring compliance with the specified standards. - **Significance:** Ensuring streamlined, efficient, and standardized processes for renewing production systems, ultimately contributing to operational efficiency and quality control in manufacturing. ### Tables Structured Data Points - **Entries:** - Row 21: Induktionssensoren, Positionsschalter und Lichtschranken. - Row 22: Klemme und Klemmenzubehör. - Row 23: Durchflussmesser und Thermometer. - Row 24: Sensoren- und Endschalterinstallation, Kabel, Stecker und Sensorenzubehör. - Row 25: Stecker - schwer und leicht. - Row 26: Lichtsignalisierung - Baulichter und Signalleuchten. - Row 27: Nockensicherheitsschalter. - Row 28: Sicherheitsschalter an Schutztüren, Fenstern usw. - Row 29: Sicherheitssystem und Sicherheitsmodule. - Row 30: Mechanische Endschalter. - Row 31: Installationskabel. - Row 32: Hochflexible Kabel. - Row 33: Überspannungsschutzelemente. - Row 34: Kabelkanäle und -rinnen. - Row 35: Energiebwegliche Kabelketten. - Row 36: Optische Sensoren. - Row 37: Kamerasysteme. - Row 38: Wegmesssysteme, linear, Winkel. - Row 39: Reserveeinspeisungsquellen. - Row 40: Drucksensoren. This comprehensive analysis provides a detailed look at the structure, content, and significance of the presented document. #################### File: Anfrage%20Mail.pdf Page: 1 Context: # Haas, Ulrich **Von:** Haug, Ralf **Gesendet:** Freitag, 13. September 2024 14:46 **An:** Haas, Ulrich **Cc:** Ruoff, Andreas; Kuck, Winfried; Haas, Sonja **Betreff:** Skoda MB SSP MGH und GGH Hallo Herr Haß, Wie gestern besprochen, anbei vorab unsere Anfrage Skoda MB SSP MGH und GGH: - Angebotspräsentation MAG MGH und GGH - Lastenheft Skoda MGH und GGH - Layout - Lastenheft Automation MAG - folgt [Link zum Dokument](https://netfiles.de/8f8adb200fa835316823b5850a55a7b7beef48d7b34e840feca03b49f6d;K319ImMY) Die besprochenen Punkte: - Traceability/Anbindung an Kundenrechner - Mobile Wartungsbühne mit/ohne elektr. Absicherung Versuchen wir mit dem Kunden zu klären. Freundlich grüßt / Best regards, Ralf Haug Projektleiter Verkauf Project Manager Auxiliary Equipment --- FFG Europe & Americas MAG IAS GmbH Salacher Straße 93 73034 Eislingen Germany tel: +49 71 61 805-1281 mobil: +49 1515 1676628 ralf.haug@mag-ias.com [www.mag-ias.com](http://www.mag-ias.com) Follow us on: [Instagram](https://www.instagram.com) | [LinkedIn](https://www.linkedin.com) | [YouTube](https://www.youtube.com) --- MAG IAS GmbH, Salacher Straße 93, DE-73034 Eislingen/Filis Sitz der Gesellschaft / Registered Seat: Eislingen/Filis Registergericht / Registration Court: AG Ulm HRB 720 186 Geschäftsführung / Managing Directors: Dr. Sebastian Schönning, Bin Sun --- ### Show **Summer 2024** 6–10 June | Coimbatore, India 22–26 July | Farnborough, UK 8 August | Sterling Heights, USA 10–14 September | Stuttgart, Germany [www.ffg-qa.com](http://www.ffg-qa.com) Image Analysis: ## Analysis of the Attached Visual Content ### 1. Localization and Attribution - **Image 1**: The main email content on the page, including the email header, introduction, and body text. - **Image 2**: The section with contact information, company logos, and social media links. - **Image 3**: The footer section, including visit invitations and legal information of the company. ### 2. Text Analysis #### **Image 1** - **Text Detected**: - **Header**: "Haass, Ulrich", "Von: Haup Ralf" - **Main Body**: ``` Hallo Herr Haas, Wie gestern besprochen anbei vorau unsere Anfrage Skoda MB SSP MGH und GGH - Anfragepräsentation MAG MGH und GGH - Lastenheft Skoda MGH und GGH - Layout - Lastenheft Automation MAG - folgt Die besprochenen Punkte: - Traceability/Anbindung an Kundelrecher - Mobile Wartungsbuhne mit/ohne elektr. Absicherung Versuchen wir mit dem Kunden zu klaren Freundlich grusst / Best regards, Ralf Haug Projektleiter Zukauf Project Manager Auxiliary Equipment ``` **Significance**: The email details a business communication, likely concerning project proposals and specific requirements for Skoda. It includes a presentation and various project deliverables such as a "lastenheft" (requirements specification). #### **Image 2** - **Text Detected**: ``` FFG Europe & Americas MAG IAS GmbH Salacher Straße 93 73054 Eislingen Germany Tel: +49 71 61 805-1281 Mobil: +49 1515 1676628 Follow us on Instagram, Linkedin, Youtube ``` **Significance**: This section provides essential contact details and links to social media channels for further engagement or inquiries. #### **Image 3** - **Text Detected**: ``` Show Summer 2024 Visit us 6-10 June Coimbatore, India 22-26 July Farnborough, UK 8 August Sterling Heights, USA 10-14 September Stuttgart, Germany MAG IAS GmbH, Salacher Straße 93, DE-73054 Eislingen/Fils Sitz der Gesellschaft / Registered Seat: Eislingen/Fils Registergericht / Registration Court: AG Ulm HRB 720 186 Geschäftsführung / Managing Directors: Dr. Sebastian Schöning, Bin Sun ``` **Significance**: This section outlines upcoming events and exhibitions where the company will be present, thus encouraging networking and showcasing opportunities. ### 3. Object Detection and Classification #### **Image 1**: - **Objects Found**: - Email header and body text. - Dates and paragraphs detailing a business proposal and the discussed points. #### **Image 2**: - **Objects Found**: - Company logos and icons for social media platforms. - Contact details (phone number, emails). #### **Image 3**: - **Objects Found**: - Invitation for various events with dates and locations. - Legal information about the company structure. ### 4. Scene and Activity Analysis - **Scene**: The composite scene over these three images represents a professional email and information document targeting business partners or potential customers. - **Activity**: The main activity is the transmission of important business-related information including project specifications, contact details, and event invitations. ### 5. Color Analysis - **Dominant Colors**: - **Email Content (Image 1)**: Primarily black and white, suggesting a focus on readability and professionalism. - **Contact Information Section (Image 2)**: Includes colors from various logos (blue, red, green), indicating brand identification. - **Event Invitation Section (Image 3)**: Uses a combination of green background and white text, making it inviting and attractive. ### 6. Perspective and Composition - **Perspective**: All images are presented in a straight-on view, typical for textual communication and document presentation. - **Composition**: - **Image 1**: Structured as an email with header, body text, and bullet points for clarity. - **Image 2**: Centrally aligned, providing clear and easy access to contact details. - **Image 3**: Designed with a promotional focus, highlighting events and legal information. ### 7. Contextual Significance - The entire visual content aims to convey professional communication regarding a project between MAG IAS GmbH and Skoda. It highlights the importance of networking, project specifications, and following up on discussed points. The inclusion of company contact details and event information further establishes credibility and invites further interaction. By addressing these key aspects, the analysis offers a detailed comprehension of the visual content and its significance. #################### File: Anfrage%20Mail.pdf Page: 2 Context: # Aufsichtsrat / Supervisory Board **Dr. Hans Ulrich Golz (Chairman)** --- Diese E-Mail enthält vertrauliche oder rechtlich geschützte Informationen. Wenn Sie nicht der beabsichtigte Empfänger sind, informieren Sie bitte sofort den Absender und löschen Sie diese E-Mail. Das unbefugte Kopieren dieser E-Mail oder die unbefugte Weitergabe der erhaltenen Informationen ist nicht gestattet. --- The information contained in this message is confidential or protected by law. If you are not the intended recipient, please contact the sender and delete this message. Any unauthorised copying of this message or unauthorised distribution of the information contained herein is prohibited. #################### File: MGH%20Anlage%2014.pdf Page: 1 Context: # Clamping MGH ## OP10 ### General Overview - New geometry that was added by Škoda tool shop - ![Fixed Part Rest](images/fixed_part_rest.png) 🔴 - ![Clamp](images/clamp.png) ➡️ - ![Location Pins](images/location_pins.png) ⚪ - ![2- and 3-Jaw Chucks](images/chucks.png) ⬇️ ### Visual Representation - **Top View** ![Top View](images/top_view.png) - **Side View** ![Side View](images/side_view.png) - **Bottom View** ![Bottom View](images/bottom_view.png) ### Safety Precautions - Always ensure that clamping mechanisms are securely fastened and functional. - Regularly inspect the integrity of the new geometries. ### Additional Notes - Reference document: - **S3 | 05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov** --- _Internal document_ Image Analysis: ### 1. Localization and Attribution: - **Image Structure**: The image contains multiple sections merged into one; hence, it will be analyzed as a single comprehensive image. ### 2. Object Detection and Classification: - **Objects**: - Components of mechanical parts in grey. - Green highlighted areas indicating new geometry added by Skoda tool shop. - Red symbols indicating various fixtures like fixed part rest, clamp, location pins, and chucks. ### 3. Scene and Activity Analysis: - **Scene Description**: - Mechanical parts are shown in three detailed sections with indicators for assembly processes. - **Activities**: - The diagram is illustrating the clamping setup for a part labeled MGH, particularly in operation step OP10, involving multiple mechanical sub-steps. ### 4. Text Analysis: - **Detected Text**: - Titles and Labels: - "Clamping MGH" - "OP10" - "New geometry that was added by Skoda tool shop" - Symbols like "fixed part rest", "clamp", "location pins", "2- and 3-jaw chucks" - Footer Information: - "S3 | 05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov" - "INTERNAL" - "SKODA" - **Text Significance**: - The text provides instructions and details about the clamping procedure, emphasizing the involvement of the Skoda tool shop and the specific operation steps (OP10). ### 5. Diagram and Chart Analysis: - **Diagrams**: - The visual contains mechanical diagrams identifying specific areas relevant to the clamping process. Green areas signify new additions, while red symbols denote various mechanical fixtures. ### 7. Anomaly Detection: - **Anomalies**: - No noticeable anomalies specific to the technical context. ### 8. Color Analysis: - **Color Composition**: - Predominantly grey-scale mechanical parts. - Green highlights indicating new geometric additions. - Red symbols and arrows used for guiding fixtures and processes. - **Impact on Perception**: - The grayscale provides clarity on mechanical part details, while green and red colors highlight essential modifications and operable components, respectively. ### 9. Perspective and Composition: - **Perspective**: - Top and front views are presented for detailed analysis of mechanical parts. - **Composition**: - Central mechanical parts with annotations and color-coded guides placed around the parts to highlight specific components and processes. ### 12. Graph and Trend Analysis: - **Trends**: - The diagram focuses on showcasing areas modified by new geometry and where specific fixtures such as clamps and chucks should be placed. ### 13. Graph Numbers: - **Data Points**: - Not applicable as the image does not contain numerical graph data points. ### Additional Aspects: - **Ablaufprozesse (Process Flows)**: - The image outlines a detailed process flow showing how parts should be positioned and clamped during the OP10 operation step. - **Prozessbeschreibungen (Process Descriptions)**: - Detailed clamping and assembly process described through annotated symbols and highlights. - **Typen Bezeichnung (Type Designations)**: - Fixed part rest, clamp, location pins, and 2- and 3-jaw chucks are identified as specific types of fixtures used in the process. ### Contextual Significance: - **Overall Document Significance**: - The image contributes detailed visual guidance crucial for assembling mechanical parts, likely for internal use within SKODA, as indicated by the "INTERNAL" label at the bottom. ### Summary: - The image provides a thorough guide for a clamping process (OP10) of a mechanical part (MGH). - Annotations include color-coded highlights and symbols to indicate new geometry added and the types of fixtures used. - Text and diagrams collectively help in understanding the detailed assembly procedure in a manufacturing or tool shop context for SKODA. #################### File: MGH%20Anlage%2014.pdf Page: 2 Context: # Clamping MGH ## OP20 and Following One of four part rests can be movable. ### Components - **Fixed part rest** - ![Fixed Part Rest Icon](fixed-part-rest-icon.png) - **Clamp** - ![Clamp Icon](clamp-icon.png) - **Location Pins** - ![Location Pins Icon](location-pins-icon.png) - **2- and 3-Jaw Chucks** - ![Jaw Chuck Icon](jaw-chuck-icon.png) ### New Geometry - New geometry that was added by Skoda tool shop (indicated in green). Image Analysis: ### Analysis of Visual Content #### 1. Localization and Attribution - **Image 1:** The image on the left. - **Image 2:** The image on the right. #### 2. Object Detection and Classification - **Image 1:** - Detected Objects: Fixed part rests, clamps, location pins, and new geometry added by the Skoda tool shop. - Key Features: The fixed part rests are marked with triangular symbols, clamps with downward arrows, location pins with target-like symbols, and new geometry sections highlighted in green. - **Image 2:** - Detected Objects: Fixed part rests, clamps, location pins, 2- and 3-jaw chucks, and new geometry added by the Skoda tool shop. - Key Features: The symbols used to identify different parts are consistent with Image 1. Additional symbols indicate 2- and 3-jaw chucks with upward arrows and circles. #### 3. Scene and Activity Analysis - **Image 1 and Image 2:** - Scene: Both images showcase a mechanical part, likely an engine component, with various annotations indicating locations for clamps, rests, and new geometries. - Activities: The images are likely used for instructional purposes in a manufacturing or machining process, detailing how and where different clamps and fixtures should be applied. #### 4. Text Analysis - **Image 1 and Image 2:** - Detected Text: - "Clamping MGH OP20 and following" - "One of four part rest can be movable" - Symbols indicating fixed part rest, clamp, location pins, and 2- and 3-jaw chucks. - Analysis: The text provides instructions and information about how the component should be clamped during the manufacturing process. The significance lies in guiding operators on the proper use of fixtures and clamps, with flexibility in the usage of one part rest being movable. #### 5. Diagram and Chart Analysis - **Image 1 and Image 2:** - The diagrams illustrate a mechanical component with various annotations regarding part clamping and geometry changes. The visual annotations guide where each clamp, rest, and pin should be placed, supplemented by the color-coded additions in green. #### 6. Product Analysis - **Image 1 and Image 2:** - Products Depicted: Mechanical component, possibly an engine or transmission part. - Main Features: Various resting points, clamping locations, and location pins, with added new geometry sections. - Materials and Colors: Grey-shaded parts indicating the base component and green highlighting new geometry sections. #### 7. Anomaly Detection - No anomalies detected in the context of the technical illustration. All elements seem purposeful and intentional as part of the instructional schematic. #### 8. Color Analysis - **Image 1 and Image 2:** - Dominant Colors: Grey for the main component and green for newly added geometries. - Impact: The color differentiation helps in clearly distinguishing new additions from the existing component structure, enhancing the instructional clarity. #### 9. Perspective and Composition - **Image 1 and Image 2:** - Perspective: Both images are likely technical renders or CAD models showing different angles of the same component. - Composition: The key elements of the diagrams (rests, clamps, pins) are strategically labeled, making it clear for manufacturing purposes. #### 10. Contextual Significance - **Image 1 and Image 2:** - The images serve as part of a technical document detailing the clamping process for a mechanical component. They contribute to the overall theme by providing crucial visual instructions for accurate component handling. ### Additional Aspects: #### Ablaufprozesse (Process Flows) - The diagrams outline the flow of how and where to apply the clamps and rests during the manufacturing process. #### Prozessbeschreibungen (Process Descriptions) - Descriptions involve the methods of clamping and the potential movement of one part rest in the operation. #### Typen Bezeichnung (Type Designations) - The type designations are indicated by symbols for fixed part rests, clamps, location pins, and 2- and 3-jaw chucks. #### Trend and Interpretation - Trends indicate a well-detailed and systematic approach to ensuring precise clamping in the manufacturing process. #### Tables - No tables are present in the provided images. In summary, the attached images are comprehensive technical illustrations meant to guide a precise and systematic clamping process for a mechanical component, with appropriate annotations, detailed text instructions, and clear visual markers to facilitate the manufacturing workflow. #################### File: MGH%20Anlage%2014.pdf Page: 3 Context: # Clamping MGH ## OP20 and Following - **Location Pins** ![location pins](link_to_image) - **2- and 3-Jaw Chucks** ![2- and 3-jaw chucks](link_to_image) - **Fixed Part Rest** ![fixed part rest](link_to_image) - **Clamp** ![clamp](link_to_image) For location orientation, the marked holes with dimension **12H7** will be used. After clamping on the holes, there may be some "optical issues," but dimension **12H7** must be kept. Holes then are used for the positioning of the axle on the assembly line (see description of T, S datums on the drawing – clipping on the next slide). Image Analysis: ### Comprehensive Examination Results #### 1. Localization and Attribution: - **Image 1**: Only one image is present on the page, so labeled as Image 1. #### 2. Object Detection and Classification: - **Image 1**: - **Detected Objects**: - Engine component or machinery part. - Location pins. - 2- and 3-jaw chucks. - Fixed part rests. - Clamps. - **Classification**: - Category: Mechanical Parts and Engine Assembly. - **Key Features**: - Complex mechanical structure with multiple elements for clamping and fixing. #### 3. Scene and Activity Analysis: - **Image 1**: - **Scene Description**: - The image depicts a section of a mechanical part focusing on how it should be clamped for the operational process OP20 and following steps. - **Activities**: - The main focus is on the attachment and orientation of the mechanical part using various clamping and positioning mechanisms. #### 4. Text Analysis: - **Image 1**: - **Detected Text**: - Clamping MGH - OP20 and following - location pins - 2- and 3-jaw chucks - fixed part rest - clamp - For location orientation will be used marked holes with dimension 12H7. After clamping on the holes can stay some "optical issues", but dimension 12H7 must be kept. Holes then are used for the positioning of the axle on the assembly line (see description of T, S datums on the drawing - clipping on the next slide). - SKODA - INTERNAL - **Text Significance**: - Provides instructions and specifications for clamping the mechanical part. - Highlights the dimensions and requirements critical for the assembly process. #### 5. Diagram and Chart Analysis: - **Not Applicable**. #### 6. Product Analysis: - **Image 1**: - **Depicted Products**: - Engine component with multiple clamps and orientation pins. - New geometry added (highlighted in green) by Skoda tool shop. - **Comparison**: - Not applicable, as only one product is depicted. #### 7. Anomaly Detection: - **Not Applicable**. #### 8. Color Analysis: - **Image 1**: - **Color Composition**: - Dominant Colors: Grey (metal part), Red (annotations), Green (new geometry). - **Impact**: - Green highlights the modifications made by the Skoda tool shop. - Red is used to draw attention to key clamping elements. #### 9. Perspective and Composition: - **Image 1**: - **Perspective**: - Side view with some top-down elements of the engine or machinery part. - **Composition**: - The mechanical part is centrally placed with text and annotations around it to explain detailed instructions and specifications. #### 10. Contextual Significance: - **Image 1**: - **Contribution to Document**: - It provides essential information on clamping and positioning a mechanical part for further processing in the production line, which is likely part of an instruction manual or technical document. #### 11. Metadata Analysis: - **Not Applicable**. #### 12. Graph and Trend Analysis: - **Not Applicable**. #### 13. Graph Numbers: - **Not Applicable**. #### Ablaufprozesse (Process Flows): - **Image 1**: - **Depicted Process Flows**: - Clamping process using pins, chucks, and fixed rests. - Ensuring proper orientation with marked holes of dimension 12H7. #### Prozessbeschreibungen (Process Descriptions): - **Image 1**: - Detailed description of clamping and positioning steps for the mechanical part. #### Typen Bezeichnung (Type Designations): - **Image 1**: - **Fixed Locations, Clamps**: Various components for mechanical clamping and positioning. #### Trend and Interpretation: - **Not Applicable**. #### Tables: - **Not Applicable**. #################### File: MGH%20Anlage%2014.pdf Page: 4 Context: # Clamping MGH ## OP20 and following | Index | Description | |-------|------------------------------------------------| | 1 | Anbringeliste Teilnahme Bohrung | | 2 | Rohrflansch Detail Sillflans | | 3 | Gehäuseschraube Routinierung | | 4 | Druckpunktbohrung | | 5 | Öl Dichtungswechsel | | 6 | Beffestigung Rahmeneck | | 7 | Anbringeliste obere Schale | | 8 | Anbringeliste mittlere Schale | | 9 | Außenmutter Zylinderkopf | ### Additional Information - The figures marked as **T** and **S** correspond to specific assembly locations on the component. Image Analysis: **Image Analysis** 1. **Localization and Attribution:** - The image is single and occupies the entire page. - It will be referred to as **Image 1**. 2. **Object Detection and Classification:** - **Object Detected:** An engineering drawing of a mechanical part, likely an automotive component, possibly a gear housing or engine part. - **Classification:** Mechanical/Engineering drawing, highlighting various parts. 3. **Scene and Activity Analysis:** - **Scene Description:** The image depicts an exploded view of a mechanical part with multiple annotations pointing to specific components. - **Activities:** No specific activities are visible as it's a technical drawing. 4. **Text Analysis:** - **Detected Text:** - Title: "Clamping MGH" - Subtitle: "OP20 and following" - Description List (column format with numbers and descriptions): - 1. Rückholfeder Bohrrung - 2. Rollenlager Bolz Stiftaufnahme - 3. Getriebeputzen Drosselklappenaufnahmen - 4. Getriebeputzen Roeachauffnahmen - 5. Öl Rücklauf Getriebeputze - 6. Getriebeputzen Paddelhubung - 7. Achse und Lager Töpfe - 8. Rückhaltfeder Passstift/Führung - 9. Kugellagerbohrung - 10. Kugellager Dichtungsflansch - 11. Druckstift Bohrung - 12. Leerlauf Knopf Lagerbohrung - 13. Drossel Kugellagerbohrung - 14. Ölniveaustand Bolzen - 15. Öl Vettel Aufnahmebrücke - 16. Maximalen Zündblitzlage fest Sitz - **Text Significance:** The text provides detailed descriptions of the components and parts of the mechanical drawing, useful for understanding assembly or maintenance procedures. 5. **Diagram and Chart Analysis:** - **Type of Diagram:** Annotated mechanical drawing - **Components Labeled:** Various parts are labeled with letters and numbers correlating to descriptions in the text box. These include E, F, P, T, S, etc. 6. **Product Analysis:** - **Product Depiction:** The mechanical part likely belongs to an internal component of a vehicle, such as a transmission or engine housing. - **Key Features:** Multiple bolt holes, complex internal pathways for fluids or air, mounting points for bearings or other parts. - **Materials:** Likely metal, typically aluminum or cast iron for such components. 7. **Anomaly Detection:** - **Possible Anomalies:** No apparent anomalies in the technical drawing as it follows standard conventions for mechanical engineering schematics. 8. **Color Analysis:** - **Color Composition:** The image is primarily black and white, typical for technical schematics to ensure clarity. - **Impact:** The monochrome scheme focuses attention on structural details without distraction from colors. 9. **Perspective and Composition:** - **Perspective:** The drawing has a detailed perspective view, showing depth and contours. - **Composition:** The mechanical part is centrally placed with annotations clearly indicating key sections and features on the drawing. 10. **Contextual Significance:** - **Overall Document Context:** Likely part of a technical manual or engineering specifications document, crucial for automotive repair or assembly processes. - **Contribution:** Provides detailed insights into the assembly and components of the mechanical part, essential for technicians or engineers. 11. **Metadata Analysis:** - **Caption Information:** - "S3 | 05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov" - **Significance:** Indicates the version (S3), date (05.08.2024), component type (Clamping MGH), document type (PPK-E), and possibly the creator (Georgy Komarov). 13. **Graph Numbers:** - **Column Breakdown:** - Data rows from 1 to 16, each corresponding to a specific component listed in the text analysis. **Additional Aspects:** - **Ablaufprozesse (Process Flows):** - The text and drawing suggest a sequential clamping or assembly process. - **Prozessbeschreibungen (Process Descriptions):** - Detailed process descriptions are provided in the text beside the numbers, likely for assembly or quality checks. - **Typen Bezeichnung (Type Designations):** - The text provides type designations for various mechanical components such as "Rückholfeder Bohrrung" and "Rollenlager Bolz Stiftaufnahme". - **Tables:** - The text list acts much like a table, matching numbered descriptions to parts on the drawing. Overall, **Image 1** serves as an intricate and detailed guide for understanding and working with a mechanical component, likely aimed at individuals in technical fields such as automotive engineering and maintenance. #################### File: MGH%20Anlage%2014.pdf Page: 5 Context: # Clamping MGH ## Remarks to clamping - Holes on the casting do not have the same axles with final machined holes on the done part. It is also relevant for indexes OP20. - Clamping pads for OP20 need to be milled to be perpendicular to indexes' axles. Image Analysis: ### Localization and Attribution: - **Image 1**: Located on the left side of the page, depicting a CAD model of a component with dimensions highlighted. - **Image 2**: Located below Image 1, showing a section of the same or another component. ### Object Detection and Classification: - **Image 1:** - **Object**: A CAD model of a mechanical component, likely part of a larger assembly, with specific dimensions highlighted in green. - **Features**: The model shows a detailed structure with various protrusions, cavities, and highlighted dimensions of 13.5 and 103.5. - **Image 2:** - **Object**: A smaller section of a mechanical component with one visible hole. - **Features**: The component appears to be a clamping part, with a cyan-colored surface, indicating the area of interest. ### Scene and Activity Analysis: - **Image 1**: - **Scene**: A technical illustration of a mechanical component with dimensions for specific features. - **Activity**: Measurement and precise dimensioning of parts for manufacturing or quality control purposes. - **Image 2**: - **Scene**: A close-up of a component section, likely for detailed analysis or highlighting a critical feature. - **Activity**: Inspection of specific areas of a mechanical part for design or manufacturing adjustments. ### Text Analysis: - **Detected Text**: - Title: "Clamping MGH" - Subtitle: "Remarks to clamping" - Bullet Points: - “Holes on the casting do not have the same axles with final machined holes on the done part. It is also relevant for indexes OP20.” - “Clamping pads for OP20 need to be milled to be perpendicular to indexes' axles.” - Footer Information: - "S3 | 05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov" - "INTERNAL" - **Analysis and Significance**: - The text provides technical notes and remarks related to the clamping (“MGH”) process. - It mentions specific observations such as the misalignment of casting holes with final machined holes and the requirement for milling clamping pads perpendicularly. - These remarks are critical for ensuring the accuracy and precision of the machining and clamping process. ### Diagram and Chart Analysis: - **Image 1**: - **Diagram**: The highlighted dimensions (13.5 and 103.5 mm) in the CAD model serve as a visual guide for machining or inspection. - **Insights**: Highlight specific areas requiring attention for manufacturing or quality checks. ### Product Analysis: - **Products Depicted**: - **Mechanical Components**: Likely part of an automotive or machinery assembly, designed for precision clamping and machining. - **Features**: Detailed CAD models showing specific measurements and structural features for accurate manufacturing. ### Anomaly Detection: - **Possible Anomalies**: - Misalignment of casting holes with final machined holes. - **Impact**: Such anomalies can lead to mechanical issues or failures if not addressed. It stresses the need for precise manufacturing and inspection processes. ### Color Analysis: - **Dominant Colors**: - Green: Highlighting specific dimensions. - Cyan: Highlighting a section in Image 2. - **Impact**: Use of color emphasizes critical features and dimensions, aiding in visual analysis and ensuring focus on important areas. ### Perspective and Composition: - **Perspective**: - **Image 1**: Isometric view providing a clear 3D representation of the component. - **Image 2**: Close-up view for detailed inspection. - **Composition**: - The arrangement facilitates focus on specific technical features, with clear annotations. ### Ablaufsprozesse (Process Flows): - Highlights issues related to the clamping process and necessary steps for milling and adjusting clamping pads for precise alignment. ### Prozessbeschreibungen (Process Descriptions): - Described processes involve identifying and resolving alignment issues in casting and final machining stages, and necessary adjustments to clamping pads. ### Typen Bezeichnung (Type Designations): - **OP20**: Likely refers to a specific operational process or part designation within the manufacturing workflow. #################### File: MGH%20Anlage%2014.pdf Page: 6 Context: # BACK-UP **Document Information:** - **Version:** S3 - **Date:** 06.08.2024 - **Document Type:** Clamping MGH | PPK-E - **Author:** Georgy Komarov **INTERNAL** #################### File: MGH%20Anlage%2014.pdf Page: 7 Context: # Clamping MGH ## Previous clamping points for OP10 ### Clamping surfaces and projections of rest pads | Status | Image | |--------|-------------------------------------| | NOK | ![NOK](image_url_1) | | OK | ![OK](image_url_2) | | NOK | ![NOK](image_url_3) | Note: Replace `image_url_1`, `image_url_2`, and `image_url_3` with the actual URLs of the images. Image Analysis: ### Image Analysis #### 1. Localization and Attribution: - **Image 1**: Positioned on the left side. - **Image 2**: Positioned in the center. - **Image 3**: Positioned on the right side. #### 2. Object Detection and Classification: - **Image 1**: - Detected Object: A section of a mechanical assembly with clamping points. - Key Features: Green clamping surface highlighted with an arrow indicating "Previous." - **Image 2**: - Detected Object: Another section of a mechanical assembly with different clamping points. - Key Features: Green clamping area marked "OK" with the arrow indicating "Previous." - **Image 3**: - Detected Object: Different mechanical assembly area with clamping points. - Key Features: Green clamping surface highlighted as "Previous" with arrow and labeled "NOK." #### 3. Scene and Activity Analysis: - **Image 1**: - Scene: A close-up of a mechanical part showing clamping surfaces. - Main Actor: The clamping surfaces. - Action: Illustration of a previously used clamping method designated as "NOK" (not okay). - **Image 2**: - Scene: Close-up of the same or similar mechanical part with a focus on a different spot. - Main Actor: The clamping surface. - Action: Illustration of a different previously used clamping method designated as "OK." - **Image 3**: - Scene: Close-up on another section of the mechanical part. - Main Actor: Clamping surface. - Action: Illustration of another previously used clamping method designated as "NOK." #### 4. Text Analysis: - **Text Detected**: - "Clamping MGH" - "Previous clamping points for OP10" - "Clamping surfaces and projections of rest pads" - "NOK" (Image 1 and Image 3) - "OK" (Image 2) - "Previous" (inside the images with arrows pointing to specific areas) - "INTERNAL", Date, Image Reference, Author, Company Logo (SKODA) - **Text Significance**: - The text provides titles and labels essential to understanding the context of the images, indicating that these images are used for explaining or comparing different clamping surfaces in a mechanical process. "NOK" signifies non-acceptable clamping points, and "OK" signifies acceptable ones. #### 5. Diagram and Chart Analysis: - No diagrams or charts are present in the images above. #### 6. Product Analysis: - Main Features: Mechanical parts with highlighted clamping surfaces, indicating previous clamping points. - Materials: Likely metallic, typical of automotive or machinery parts. #### 7. Anomaly Detection: - No apparent anomalies are detected in the images as they all show expected close-ups of mechanical parts with highlighted clamping surfaces. #### 8. Color Analysis: - Dominant Colors: - Green: Used to highlight clamping surfaces. - Grey: Background and mechanical components. - Red: Arrows pointing to specific areas. - Impact on Perception: The color scheme effectively directs focus on the clamping points due to the high contrast between the green highlights and the grey mechanical parts. #### 9. Perspective and Composition: - Perspective: Close-up views of mechanical parts with a direct angle focusing on clamping points. - Composition: The clamping surfaces are placed centrally within the frame, highlighted with arrows and text to guide the viewer's focus. #### 10. Contextual Significance: - The images likely form part of a technical document or a presentation addressing clamping methods in a mechanical process, possibly in an automotive setting, as suggested by the SKODA logo. ### Additional Aspects #### Ablaufprozesse (Process Flows): - Depiction of clamping process evaluations and highlighting issues. #### Prozessbeschreibungen (Process Descriptions): - Describes the evaluation of previous clamping points used in the mechanical process and categorizes them into acceptable and non-acceptable clamping methods. #### Typen Bezeichnung (Type Designations): - Categories: "NOK" - non-acceptable areas, "OK" - acceptable area. #### Trend and Interpretation: - The images emphasize a need for reviewing and possibly updating clamping methods to ensure they meet acceptable standards. ### Conclusion The images analyzed provide critical information on the clamping points used in mechanical assemblies. Their clear labeling and color-coding assist in quickly identifying acceptable and non-acceptable methods within a technical context related to the automotive industry. #################### File: MGH%20Anlage%2014.pdf Page: 8 Context: # Clamping MGH ## New clamping points for OP10 ### Clamping surfaces and projections of rest pads | Image | Status | |-------------|--------| | ![Clamping MGH Image 1](path_to_image1) | OK | | ![Clamping MGH Image 2](path_to_image2) | OK | | ![Clamping MGH Image 3](path_to_image3) | OK | **Note:** Replace `path_to_image1`, `path_to_image2`, and `path_to_image3` with the actual image paths. Image Analysis: ### Image Analysis **1. Localization and Attribution:** - **Image Numbering:** - Image 1: First image on the left - Image 2: Middle image - Image 3: First image on the right **2. Object Detection and Classification:** - **Image 1:** - Objects: Car part components, highlighting the clamping points. - Key Features: The clamping points on the car part are highlighted in green with red arrows indicating specific locations. - **Image 2:** - Objects: Similar car part components with additional clamping points. - Key Features: Similar depiction with clamping points highlighted in green and focused areas indicated by red arrows. - **Image 3:** - Objects: Car part components, emphasizing another set of clamping points. - Key Features: The same pattern of highlighting in green and red arrows showing precise points. **3. Scene and Activity Analysis:** - **Overall Scene:** All three images focus on different sections of a car component system, highlighting new clamping points relevant for OP10 (Operation 10). - **Activities:** - Highlighting and verifying new clamping points and rest pad surfaces. - Ensuring the identified points are appropriate for the given operation stage as indicated by “OK.” **4. Text Analysis:** - **Detected Text:** - "Clamping MGH" - "New clamping points for OP10" - "Clamping surfaces and projections of rest pads" - "OK" (under each image) - Additional footer text implying internal use and a specific date and author. - **Text Significance:** - The primary text informs about new clamping points designed for a specific operational code (OP10). - The consistent "OK" under each image suggests verification and approval of the highlighted clamping points. **9. Perspective and Composition:** - **Perspective:** - All images are close-up views, providing detailed insights into particular parts of the car components. - Angled views focusing on non-linear components suggesting a 3-dimensional analysis standard. - **Composition:** - The images are arranged side by side to allow comparison. - Each image has internal highlighting that guides the viewer's attention towards the critical points relevant to the operational process. **10. Contextual Significance:** - The images and text collectively detail a technical update or modification for a car manufacturing/engineering process. - They serve the purpose of demonstrating and verifying new clamping points effectiveness in practical scenarios (Operation 10). **13. Graph Numbers and Additional Aspects:** - **Process Descriptions:** - This is a technical document presenting process improvements, specifically adding new clamping points for operational efficiency. - **Type Designations:** - OP10 refers to a specific task or operation in the assembly or manufacturing process. ### Summary In the analyzed visuals, we focused on the technical aspects of incorporating new clamping points in car components for a designated operation (OP10). The consistent use of highlighting and arrow indicators draws attention towards key functional points. The overall structure, including perspectives and text descriptions, enhance the understanding and verification of these modifications for internal operational assurance. #################### File: MGH%20Anlage%2014.pdf Page: 9 Context: # Clamping MGH ## Clamping point 4 in OP20 ![Clamping point 4](image_path.png) **Figure: Projection of rest pad** - **Important Notes:** - Ensure the clamping point is aligned properly. - Check the projections before proceeding to the next step. ### References - S3 | 05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov **Internal Document** Image Analysis: ### Analysis of the Provided Visual Content #### 1. Localization and Attribution - **Image 1**: Located on the left side of the page. - **Image 2**: Located on the right side of the page. #### 2. Object Detection and Classification - **Image 1**: - **Objects Detected**: A complex mechanical component, possibly a section of an automotive engine or transmission assembly. - **Classification**: The object is categorized under engineered mechanical parts. - **Key Features**: Visible parts include what appear to be rest pads and various geometric features indicative of a casting or machining process. - **Image 2**: - **Objects Detected**: Another mechanical component, possibly a 3D model of a related or undetermined part, shown with a wireframe overlay. - **Classification**: Similar to Image 1, categorized under mechanical parts or CAD models. - **Key Features**: Wireframe details and annotations indicating measurements or design parameters. #### 3. Scene and Activity Analysis - **Image 1**: - **Scene Description**: A close-up view of a mechanical part with highlighted regions, specifically indicating the clamping point, rest pad projection, and likely inspection features. - **Activities**: The image appears to be explaining the process of clamping or securing the part at a specified point during a manufacturing operation. - **Image 2**: - **Scene Description**: A zoomed-in view of a 3D CAD model with emphasis on specific features of the part, suggestive of a technical inspection or quality control process. #### 4. Text Analysis - **Image 1 Text**: - "Clamping MGH", - "Clamping point 4 in OP20" - "Projection of rest pad" - **Image 2 Text** (Overlay/Annotations): - Various technical parameters or notes displayed as part of the CAD model, though not entirely legible at the provided resolution. - **Significance**: The text explains that the images are related to clamping mechanisms in a manufacturing process (operation point 20). It highlights the importance of precision in positioning and securing the component for further operations. #### 6. Product Analysis - **Image 1**: - **Product**: Mechanical assembly component. - **Features**: Detailed design, highlighting specific areas such as clamping points and rest pads. - **Materials**: Likely metal, based on typical automotive or heavy machinery parts. - **Colors**: Predominantly gray with highlights in green and red annotations. - **Image 2**: - **Product**: 3D CAD model of a mechanical part. - **Features**: Wireframe and surface details with precision markings. - **Materials**: Virtual model; material inferred to be metal. - **Colors**: Green wireframe overlay on a transparent or light gray background. #### 8. Color Analysis - **Image 1**: - **Dominant Colors**: Gray, with green and red highlights. - **Impact**: The use of color helps in distinguishing specific features (e.g., clamping point, rest pad) making it easier for viewers to focus on important details. - **Image 2**: - **Dominant Colors**: Green wireframe with a grayish background. - **Impact**: The green wireframe offers a clear contrast against the background to emphasize technical details. #### 9. Perspective and Composition - **Image 1**: - **Perspective**: Close-up perspective to focus on the intricate details of the clamping mechanism. - **Composition**: Key features are centrally located with annotations clearly pointing to relevant areas. - **Image 2**: - **Perspective**: Zoomed-in view of a CAD model. - **Composition**: The model is presented in such a way as to highlight the technical annotations and measurements, suggesting a focus on technical accuracy. ### Contextual Significance The blended use of physical part illustrations and CAD models suggests a document focused on explaining engineering processes and the precision required in manufacturing, specifically in the context of automotive or heavy machinery industries. The detailed annotations and 3D representations are intended for an audience well-versed in technical and engineering concepts, aiding in process validation or inspection protocols. The combination of detailed views, annotations, and 3D modeling underscores the importance of accuracy and quality control in manufacturing processes, reinforcing the document's technical nature aimed at engineering professionals. #################### File: Standardanschreiben%281%29.pdf Page: 1 Context: # Skoda AUTO a.s., Václava Klementa 869, 293 60 Mladá Boleslav **Einkäufer:** Michala Senkyróva **Abteilung:** Beschaffung Aggregatfertigung und Infrastruktur **Telefon:** **E-Mail:** Michala.Senkyrova@skoda-auto.cz **Datum:** 26.06.2024 --- **Anfrage-Nr.: SK 2024 001598** Sehr geehrte Damen und Herren, wir bitten Sie um Ihr für uns unverbindliches und kostenloses Angebot unter Zugrundelegung unserer nachstehenden aufgeführten Geschäftsbedingungen und unter Verwendung der beigefügten Unterlagen für: **Obráběcí linka motorové skříně MGH SSP/Machining line of the SSP E-drive motor box** Wir bitten um Einreichung Ihres Angebots über die Konzernbusinessplattform. Zuständig für technische Rückfragen ist ** ** **** Georgy.Komarov@skoda-auto.cz Es gelten die nachfolgend aufgeführten Geschäftsbedingungen: - Einkaufsbedingungen ŠKODA AUTO a.s. - Allgemeine Beschaffung (04/2024) Die aktuelle Fassung der Geschäftsbedingungen finden Sie auf [http://www.vwgroupsupply.com](http://www.vwgroupsupply.com) unter folgendem Pfad: Zusammenarbeit / Geschäftsbedingungen Nicht fristgerecht eingereichte Angebote bleiben unbe berücksichtigt. Mit freundlichen Grüßen i.V. Jiří Kulich i.V. Michala Senkyróva --- Dieses Schreiben wurde maschinell erstellt und ist ohne Unterschrift gültig. **ŠKODA AUTO a.s.** T: Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic IČO: 00177041, Městský soud v Praze B 332 T +420228241111 --- 26.06.2024 | SK BA/2 | KSU 6.1 - 15 Jahre | vertraulich Image Analysis: **Image Analysis Results:** ### Localization and Attribution: - **Image 1**: The entire content is a single page document. No other images are present on the page. ### Text Analysis: - **Detected Text**: ``` Škoda AUTO a.s., Václava Klementa 869, 293 60 Mladá Boleslav **Einkäufer:** Michala Senkyrova **Abteilung:** Beschaffung Aggregatenfertigung und Infrastruktur **Telefon:** **E-Mail:** Michala.Senkyrova@skoda-auto.cz **Datum:** 26.06.2024 **Anfrage-Nr: SK2024 001598** Sehr geehrte Damen und Herren, wir bitten Sie um Ihr für uns unverbindliches und kostenloses Angebot unter Zugrundelegung unserer nachstehenden aufgeführten Geschäftsbedingungen und unter Verwendung der beigefügten Unterlagen für: Obráběcí linka motorové skříně MGH SSP/Machining line of the SSP E-drive motor box Wir bitten um Einreichung Ihres Angebots über die Konzernbusinessplattform. Zuständig für technische Rückfragen ist Vorname Georgy.Komarov@skoda-auto.cz Es gelten die nachfolgend aufgeführten Geschäftsbedingungen: - Einkaufsbedingungen ŠKODA AUTO a.s.- Allgemeine Beschaffung (04/2024) Die aktuelle Fassung der Geschäftsbedingungen finden Sie auf http://www.vwgroupsupply.com unter folgendem Pfad: Zusammenarbeit / Geschäftsbedingungen Nicht fristgerecht eingereichte Angebote bleiben unberücksichtigt. Mit freundlichen Grüßen i.V. Jiří Kulich i.V. Michala Senkyrova Dieses Schreiben wurde maschinell erstellt und ist ohne Unterschrift gültig. **ŠKODA AUTO a.s.** TE: Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic IČO: 00177041, Městský soud v Praze B 332 T +4203268-1111 26.06.2024 | SK BA/2 | KSU 6.1 - 15 Jahre | vertraulich ``` ### Text Content Analysis: - **Context and Significance**: - The document appears to be an official request for quotation (RFQ) from Škoda AUTO a.s., a prominent automobile manufacturer. - It is addressed by Michala Senkyrova and dated 26.06.2024, aiming to gather a non-binding and free quotation. - The document requests an offer for "Obráběcí linka motorové skříně MGH SSP/Machining line of the SSP E-drive motor box." - It also outlines the designated point of contact for technical queries and directs submissions to the company's business platform. - Emphasis is given to the adherence to specific terms and conditions, with references to relevant documentation that can be found online. - It is noted that offers not submitted within the specified timeframe will not be considered. - The formality is underscored by the automated nature of the document, which does not require a signature to be valid. ### Object Detection and Classification: - **Logos and Symbols**: - The company’s logo (Škoda) is depicted along with associated contact information. - The header includes the official address and other contact details of Škoda AUTO a.s. ### Color Analysis: - **Color Composition**: - Dominant colors include black and white text on a white background. - The Škoda logo comprises green and black colors. - **Impact on Perception**: - The color scheme provides a professional and corporate appearance, enhancing readability and focusing attention on the textual content. ### Perspective and Composition: - **Perspective**: - The document presents straight-on, as typical of a scanned or digital document. - **Composition**: - Structured with clear sections including header, body, and footer, making it easy to follow and locate specific information within the text. ### Contextual Significance: - **Document's Contribution**: - This image serves as an official communication tool within the procurement processes of Škoda AUTO a.s., ensuring standardized requests for supplier quotations and clarity in business dealings. ### Anomaly Detection: - **Unusual Elements**: - There are no notable anomalies in the document; it follows a standard layout expected for corporate communications of this nature. By adhering to structured text and clear headings, the document effectively communicates its purpose and requirements to its intended recipients. #################### File: Standardanschreiben%281%29.pdf Page: 2 Context: # Škoda AUTO a.s. VÁCLAVA KLEMENTA 869, 293 60 Mladá Boleslav --- **Purchaser:** Michala Senkyrova **Department:** Beschaffung Aggregatenfertigung und Infrastruktur **Telephone:** **E-Mail:** Michala.Senkyrova@skoda-auto.cz **Date:** Jun 26, 2024 --- **Inquiry no.:** SK 2024 001598 Dear Sir or Madam, Please submit a non-binding, free-of-charge offer based on our terms and conditions (as listed below) and using the attached documents for: **Obráběcí linka motorové skříně MGH SSP / Machining line of the SSP E-drive motor box** Please submit your bid via the Group business platform. For technical queries, please contact: **First Name Last Name** Georgy.Komarov@skoda-auto.cz The terms and conditions below apply: - General Purchase Terms and Conditions of ŠKODA AUTO a.s. (04/2024) The current version of the terms and conditions can be found at [VW Group Supply](http://www.vwgroupsupply.com) at: Cooperation information / Purchasing Conditions Quotations submitted after the deadline will not be considered. Yours sincerely, p.p. Jiří Kulich p.p. Michala Senkyrova --- This letter was generated automatically and is valid without a signature. --- ŠKODA AUTO a.s. T.E.: Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic IČO: 00220173, Městský soud v Praze B 332 T * +420202281111 Jun 26, 2024 | SK BA/2 | KSU 6.1 - 15 years | confidential Image Analysis: ### 1. **Localization and Attribution:** There is only one page with a single image of a letter. We will refer to this as **Image 1**. ### 4. **Text Analysis:** The text on the document contains details related to a formal inquiry or request for a bid submission. **Extracted Text:** - **Company Information:** - Skoda AUTO a.s. - Address: Václava Klementa 869, 293 60 Mladá Boleslav - **Inquiry Information:** - Inquiry no.: SK 2024 001598 - Date: Jun 26, 2024 - **Context of the Inquiry:** - The letter requests a non-binding, free-of-charge offer based on specified terms and conditions. - The specific item for the bid is "Machining line of the SSP E-drive motor box". - **Contact Information:** - Purchaser: Michala Senkyrova - Department: Beschaffung Aggregatefertigung und Infrastruktur - E-Mail: Michala.Senkyrova@skoda-auto.cz - For technical queries: Georgy.Komarov@skoda-auto.cz - **Additional Information:** - Mention of the necessity to submit bids via the Group business platform. - Quotes submitted after the deadline will not be considered. - **Signature Block:** - p.p. Jiří Kulich - p.p. Michala Senkyrova **Significance:** The text is significant in the context of procurement and offers a formal request for proposal. It details the requirements and the method of submission for a specific project within the automotive company Skoda AUTO a.s. ### 6. **Product Analysis:** The focus is on the "Machining line of the SSP E-drive motor box." This implies a sophisticated production setup likely requiring advanced machinery designed for precision manufacturing within the automotive sector. ### 8. **Color Analysis:** The color scheme is predominantly white with black text, which is standard for formal business documents. There is also a green logo of Skoda at the top right, which adds brand identity and recognition to the document. ### 9. **Perspective and Composition:** The document is presented in a straightforward, top-down view commonly used for scanning or digital documentation. The composition follows conventional business format with a letterhead providing company details, followed by the body of the message and ending with signatures and disclaimers. ### 10. **Contextual Significance:** This image serves as an official communication for procurement purposes within Skoda AUTO a.s. It addresses professional relationships with suppliers and clearly sets out the requirements and terms for submission of business proposals. ### 12. **Graph and Trend Analysis:** No graphs or trends are presented in this document. ### 13. **Ablaufprozesse (Process Flows):** There are no direct process flows described in the image. ### 14. **Prozessbeschreibungen (Process Descriptions):** The document does not provide detailed descriptions of processes within the image. ### 16. **Trend and Interpretation:** No visual trends are depicted. The text primarily serves as a static formal request for a bid. ### 17. **Tables:** No tables are present in the image. This analysis captures the essential components and purpose of the document, helping understand its function within the procurement process of Skoda AUTO a.s. #################### File: Standardanschreiben%281%29.pdf Page: 3 Context: # Skoda AUTO a.s. Václava Klementa 869, 293 60 Mladá Boleslav ## Nákup: **Zástupce:** Michala Senkyrova **Oddělení:** Beschaffung Aggregatenteiligung und Infrastruktur **Telefon:** **E-Mail:** Michala.Senkyrova@skoda-auto.cz **Datum:** 26.6.2024 Č. poptávky: SK 2024 001598 Vážení, žádáme Vás o nezávaznou a bezplatnou nabídku na základě našich níže uvedených nákupních podmínek zpracovanou podle poskytnutých podkladů pro: **Obráběcí linka motorové skříně MGH SSP / Machining line of the SSP E-drive motor box** Žádáme Vás o podání Vaší nabídky přes koncernovou obchodní platformu. Za technické dotazy odpovídá **Georgy Komarov** E-Mail: Georgy.Komarov@skoda-auto.cz Platí dále uvedené nákupní podmínky: - Všeobecné nákupní podmínky ŠKODA AUTO a.s. (04/2024) - Aktuální znění nákupních podmínek naleznete na [www.vwgroupsupply.com](http://www.vwgroupsupply.com) v následující složce: - Informace o spolupráci / Nákupní podmínky Nabídky, které nebudou podány včas, nebudou akceptovány. S pozdravem, v.z. Jiří Kulich v.z. Michala Senkyrova Tento dopis byl vyhotoven automaticky a platí bez podpisu. --- **SKODA AUTO a.s.** Těšnov 2, 293 60 Mladá Boleslav, Czech Republic Tel: +420.601.774.205, Městský soud v Praze B 332 Tax ID: +42020228-1111 Image Analysis: ### Analysis of Attached Visual Content #### Localization and Attribution: - The visual content is represented by a single document, hence all references pertain to this document. - **Number of Images:** - Only one image is provided in the document. #### Object Detection and Classification: - **Image 1:** - The document contains various elements including text, logos, and formatting elements like lines and text blocks. #### Scene and Activity Analysis: - **Image 1:** - This appears to be an official letter from Skoda AUTO a.s. addressing a supplier or potential partner regarding a request for a quote. - The letter mentions procurement requirements for a machining line for SSP E-drive motor box. #### Text Analysis: - **Image 1:** - Text Content: - The letter is written in Czech and includes formal procurement language. - Key sections include: - Sender and recipient details. - Purpose of the letter: Request for a quote (RFQ). - Specific details about the needed machining line. - Submission guidelines and contact details. - Reference to procurement conditions. - Significance: - This text is crucial for communicating exact procurement requirements and expectations to potential suppliers, ensuring clarity and proper response. #### Product Analysis: - **Image 1:** - The document does not depict any specific products directly but references a machining line for the SSP E-drive motor box, which indicates the nature of the product or service required. #### Anomaly Detection: - **Image 1:** - There do not appear to be any noticeable anomalies in the document. It follows a typical structure for such correspondence. #### Color Analysis: - **Image 1:** - The document primarily uses a white background with black text. - The Skoda logo adds green and gray colors. #### Perspective and Composition: - **Image 1:** - The document is presented from a straightforward, flat perspective, typical of scanned or digitally created documents. - The elements such as the logo, address, and text blocks are aligned for clear readability and professional appearance. #### Contextual Significance: - **Image 1:** - This document serves an important role in the procurement process for Skoda AUTO a.s., establishing official communication with potential suppliers. #### Metadata Analysis: - **Image 1:** - No metadata is available to analyze in the provided visual content. #### Conclusion: The analysis of the provided document indicates that it is an official procurement communication from Skoda AUTO a.s., seeking a quote for a machining line related to the SSP E-drive motor box. The document includes detailed procurement conditions and contact information, ensuring potential suppliers are fully informed about submission requirements and expectations. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE.pdf Page: 1 Context: # Škoda Auto a.s. ## Richtlinie für die Vereinheitlichung von Elementen ### Projekt Erneuerung der Produktionsanlagen im Bereich PKG **Ausgabedatum:** 28.01.2020 **PSZ/1 - Methodik und Standardisierung** **1 - H - 20 DE** Diese Richtlinie hebt die Gültigkeit von früher erlassenen Richtlinien, Normen, Lastenheft und ITS ŠkodaAuto nicht auf. Bei Komponenten, bei denen mehrere Lieferanten genehmigt sind, wird bei der Vergabe von Lieferungen projektbezogener Anlagen immer nur ein Lieferant vertraglich festgelegt. Potentielle Lieferanten sind Lieferanten, die entweder die Projektfreigabe bereits bekommen haben, oder bei denen davon ausgegangen werden, dass sie nach Erprobung und Erfüllung der Konzernstandards die Projektfreigabe noch bekommen können. ### Bearbeitet von: - Martin Janata **PSZ/12** tel.: +420 732 294 691 - Milan vypraclicky **PKG/4** tel.: +420 732 294 226 ### Genehmigt von: - Aleš Ivanovič **PSZ/1** tel.: +420 730 869 870 - Ing. Ladislav Treml **PKG/4** tel.: +420 732 294 945 - Ing. Roman Tanček **PPK/2** tel.: +420 604 292 729 ### Übersicht von Änderungen: | Datum | Seite | Anmerkung | |--------------|-------|-----------------| | 28.01.2020 | 1 | Erste Ausgabe | **Seite 1 von 4** Image Analysis: ### Analysis of Visual Content #### 1. Localization and Attribution: - **Image Specification:** - The entire content is considered as one image (Image 1). #### 2. Object Detection and Classification: - **Objects Detected:** - **Primary Object:** - Document with text, tables, and signatures. - **Identification Features:** - Company logo at the top right corner. - Several names and contact information listed. - Signatures and stamps at the bottom. #### 4. Text Analysis: - **Text Extracted:** - **Header:** - "SIMPLY CLEVER" - "Škoda Auto a.s." - "Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG" - "Ausgabedatum: 28.01.2020" - **Middle Section:** - "PSZ/1 - Methodik und Standardisierung 1 - H - 20 DE" - Body text regarding the guidelines for the unification of various elements and supplier contracts. - **Signatures and Stamps:** - Names with roles (e.g., Martin Janata, Milan Vprachticky, etc.) - Contact details with phone numbers. - **Table Section:** - Columns for "Datum," "Seite," and "Anmerkung." - Date entry: "28.01.2020" with the note "Erste Ausgabe" indicating the first issue. #### 5. Diagram and Chart Analysis: - **Table Content:** - **Column Descriptions:** - "Datum" (Date) - "Seite" (Page) - "Anmerkung" (Remark) - **Row Entries:** - Date: "28.01.2020" - Page: "1" - Remark: "Erste Ausgabe" (First Issue) #### 7. Anomaly Detection: - **Unusual Elements:** - None detected. The document appears to be a standard guideline with usual elements such as text, signatures, stamps, and a table for changes. #### 8. Color Analysis: - **Color Composition:** - Dominant colors: Black text on a white background. - Additional colors include green (highlighted elements) and logos. #### 9. Perspective and Composition: - **Perspective:** - The image is taken from a top-down view, ensuring the entire page and its contents are clearly visible. - **Composition:** - Structured in a formal document layout with a header, body, and footer sections. #### 10. Contextual Significance: - **Document Analysis:** - The document appears to be an official company guideline or directive for standardizing the processes or elements related to the renewal of production facilities under Škoda Auto a.s. It defines the roles, responsibilities, and contact details of key personnel involved, along with stamps and signatures for authenticity. ### Conclusion: - The image analyzed is a structured official document issued by Škoda Auto, outlining standardization guidelines, key personnel, and their contact information for a project regarding the renewal of production equipment. The presence of signatures and stamps underscores the document's legitimacy, while the table at the bottom indicates it is the first issue of the guideline. The dominant use of black and white colors, with elements in green, contributes to the formal appearance of the document. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE.pdf Page: 2 Context: # Škoda Auto a.s. Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG Ausgabedatum: 28.01.2020 ## PSZ/1 - Methodik und Standardisierung 1 - H - 20 DE ## I. Teil: Standards für Produktionsanlagen und Komponenten Die unentstehenden Standards für den Bereich der Aggregaterfertigung im VW-Konzern sind verbindlich: 1. Lastenheft Mechanik (im Weiteren KLH Mechanik) 2. Lastenheft Elektrik (im Weiteren KLH Elektrik) 3. ITS Škoda Auto, viz.: [CZ version](#) | [DE version](#) | Nr. | Produktionsanlagen/Komponenten | Freigegebene Lieferanten | Potentielle Lieferanten | Anmerkungen | |-----|--------------------------------|--------------------------|------------------------|-------------| | 1. | Elektrik, Steuerungstechnik | s. Teile Elektro, S. 3-4 | ITS: 1.1, 5.13 | | 0.1 | Dokumentation Elektrik und Steuerungstechnik | Eplan P8 ver. 2.2 oder höher | | ITS: 1.10 | | 2. | Mechanik | Festo, SMC | Norgren | ITS: 1.13 | | 3. | Pneumatik | | | ITS: 1.17 | | 4. | Schmieren | SKF Lubrikation | | ITS: 1.12 | | 5. | Hydraulik | Bosch Rexroth, Parker | | ITS: 1.12 | | 6. | Filtertechnik | Hydac, Mahle, Bosch Rexroth | | Viz KLH Mechanik | | 0.6 | Pumpen | KSB, Knoll, Grundfos | | | | 7. | Schraubtechnik | Bosch Rexroth | | Bosch Rexroth system BS350 | ## II. Teil: Elektrik, Steuerungssysteme Seite 2 von 4 Image Analysis: ### Localization and Attribution - Image 1: Single image present on the page. ### Text Analysis - The detected text is primarily in German and includes headers, sections, subsections, and a table with specified standards. - **Primary Heading:** - "Škoda Auto a.s." - Other information: "Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG". - Issue Date: "Ausgabedatum: 28.01.2020". - **Section I:** - "I.Teil: Standards für Produktionsanlagen und Komponenten" - **Sections Detail:** - "Die untenstehenden Standards für den Bereich der Aggregatenfertigung im VW-Konzern sind verbindlich:" - Specific Standards: 1. "Lastenheft Mechanik (im Weiteren KLH Mechanik)" 2. "Lastenheft Elektrik (im Weiteren KLH Elektrik)" 3. "ITS ŠkodaAuto, viz.:" - Links to versions: "CZ version, DE version" - **Sections in Table and Notes:** - "PSZ/1 - Methodik und Standardisierung", "1 - H - 20 DE" ### Table and Content - **Header of the Table:** - Columns: - "Nr." (Number) - "Produktionsanlagen/Komponenten" (Production Equipment/Components) - "Freigegebene Lieferanten" (Approved Suppliers) - "Potentielle Lieferanten" (Potential Suppliers) - "Anmerkungen" (Comments) - **Detailed Table Content:** - **Row 1:** - Nr: 1 - Produktionsanlagen/Komponenten: "Elektrik, Steuerungstechnik" - Freigegebene Lieferanten: "s. Teile Elektro, S. 3-4" - Anmerkungen: "ITS: 1.11, 5.13" - **Row 2:** - Nr: 0.1 - Produktionsanlagen/Komponenten: "Dokumentation Elektrik und Steuerungstech" - Freigegebene Lieferanten: "Eplan P8 ver. 2.2 oder höher" - Anmerkungen: "ITS:1.10" - **Row 3:** - Nr: 2 - Produktionsanlagen/Komponenten: "Mechanik" - Freigegebene Lieferanten: "ITS: 1.10" - **Row 4:** - Nr: 3 - Produktionsanlagen/Komponenten: "Pneumatik" - Freigegebene Lieferanten: "Festo, SMC" - Potentielle Lieferanten: "Norgren" - Anmerkungen: "ITS 1.13" - **Row 5:** - Nr: 4 - Produktionsanlagen/Komponenten: "Schmieren" - Freigegebene Lieferanten: "SKF Lubrikation" - Anmerkungen: "ITS 1.17" - **Row 6:** - Nr: 5 - Produktionsanlagen/Komponenten: "Hydraulik" - Freigegebene Lieferanten: "Bosch Rexroth, Parker" - Anmerkungen: "ITS 1.12" - **Row 7:** - Nr: 6 - Produktionsanlagen/Komponenten: "Filtertechnik" - Freigegebene Lieferanten: "Hydac, Mahle, Bosch Rexroth" - Anmerkungen: "ITS 1.12" - **Row 8:** - Nr: 06.1 - Produktionsanlagen/Komponenten: "Pumpen" - Freigegebene Lieferanten: "KSB, Knoll, Grundfos" - Anmerkungen: "Viz KLH Mechanik" - **Row 9:** - Nr: 7 - Produktionsanlagen/Komponenten: "Schraubtechnik" - Freigegebene Lieferanten: "Bosch Rexroth" - Potentielle Lieferanten: "Bosch Rexroth system BS350" ### Diagram and Chart Analysis - The primary diagram is a table, detailing production components, along with approved and potential suppliers. - The table is not a typical chart but provides structured data that indicates standards for different production components and their suppliers. ### Contextual Significance - This image is likely part of a standardization document for Škoda Auto a.s., aimed at unifying elements for production line renewal. - The document specifies standards and approved suppliers for various components of production systems, ensuring uniformity and consistency within the VW Group. ### Color Analysis - The overall color scheme is professional and minimalistic, primarily using black text with green highlights for certain sections and names. - There is a logo in green and grey, which is indicative of the brand's identity and adds a professional touch. ### Perspective and Composition - The perspective is straightforward, presenting information in a clear, readable format from a direct, straight-on viewpoint. - The composition is well-organized, with a logical flow from headers to tables, ensuring ease of reading and understanding. ### Trend and Interpretation - The data suggests a focus on approved suppliers with specific standards and a smaller list of potential suppliers. This implies a stringent quality control and approval process pivotal for maintaining production standards. - Key insights can be drawn regarding which suppliers have dominance in certain components (e.g., Bosch Rexroth appears multiple times). ### Additional Aspects - **Ablaufprozesse (Process Flows):** While process flows are not explicitly depicted, the structured table can be viewed as a part of a larger workflow ensuring compliance with standards. - **Prozessbeschreibungen (Process Descriptions):** Descriptions involve compliance with predefined guidelines, suggesting a regulated production and approval system for components. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE.pdf Page: 3 Context: # Škoda Auto a.s. Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG Ausgabedatum: 28.01.2020 ## PSZ/1 - Methodik und Standardisierung 1 - H - 20 DE | Nr. | Produktionsanlagen/Komponenten | Lieferantenfreigabe | Potentielle Lieferanten | Anmerkungen | |-----|-----------------------------------------|----------------------|---------------------------------|-----------------------------------------| | 1 | Steuerungssysteme SPS(PLC) | Siemens | Siemens Simatic S7 Baureihe | 1500 - TIA V14 und höher | | 2 | NC - Steuerung | Siemens | Siemens (Sinumerik 840D sl.) | | | 3 | PC- und Panel-PC-basierte Steuerungssysteme, Übergeordnete Steuerung – Kommunikationsmodul | Siemens | System - Simatic S7 (HW SPS) | Profinet | | 4 | Visualisierung | Siemens WinCC Flexible | WinCC Flexible 2008 | | | 5 | Steuerungspanels | Siemens | | | | 6 | Dezentrale Sammlung | Profinet | Profibus, IO-link | | | 6.1 | Passiver Stecker-Injektoren (Sensoren, Ventile) | Balluff | Murrelektronik | IO-link | | 6.2 | Aktiver Stecker-Injektoren (Sensoren, Ventile) | Balluff | | Siemens (ET 200 PRO) | | 7 | Dezentrale Peripherie | Siemens | ABB | Kuka (Külsin VRC 4) | | 8 | Roboter | ABB | | | | 9 | Elektrische Frequenzantriebe – Umrichter | SEW Eurodrive | Siemens | VW Konzern Freigabe | | 10 | Elektrische Servo-Antriebe | Siemens, Bosch Rexroth | Siemens | Spezifikation Škoda Auto a.s. | | 11 | Steuerungselemente – Tasten, Kontrolle | Schneider Electric | Siemens | Spezifikation Škoda Auto a.s. | | 12 | Zweihändige Bedienung | Schneider Electric | Schmersal-Ein | Spezifikation Škoda Auto a.s. | | 13 | Elektroschränke (Verteiler) | Rittal | | VW Konzern Freigabe | | 14 | Klemmkästen | Rittal | | VW Konzern Freigabe | | 15 | Kühlung Verteilerschränke (Klimaanlage) | Sick | | Spezifikation Škoda Auto a.s. | | 16 | Lichtschutzanlagen / Scanner | ASO - Contra, Pilz, Schneider Electric | IOSS | Cognex, Keyence, Balluff | Spezifikation Škoda Auto a.s. | | 17 | DMC- und Strichcode-LEsegerät | Balluff, Turck-Banner | Siemens | Spezifikation Škoda Auto a.s. | | 18 | Schalt- und Sicherungselemente | Siemens, Murrelektronik | Schneider Electric | Spezifikation Škoda Auto a.s. | | 19 | Optisches Sensoren | Sick, IFM Electronic, Balluff | | | Image Analysis: ### Analysis of Visual Content #### 1. Localization and Attribution: - **Image Localization and Attribution:** - The document contains a single image comprising a structured table of components and suppliers. - This image will be referred to as **Image 1**. #### 4. Text Analysis: - **Text Extraction:** - The text includes a header, table headers, and cells within the table. - **Header:** - Škoda Auto a.s. - Richtlinie für die Vereinheitlichung von Elementen Projeklt Erneuerung der Produktionsanlagen im Bereich PKG - PSZ/1 - Methodik und Standardisierung - Ausgabe datum: 28.01.2020 - **Table Columns:** - Nr. - Produktionsanlagen/Komponenten - Lieferantenfreigabe - Potenzielle Lieferanten - Anmerkungen - **Table Data:** - **Row 1:** 1. Steuerungssysteme SPS(PLC) 2. Siemens 3. Siemens Simatic S7 Baureihe 1500 - TIA V14 und höher - **Row 2:** 1. NC - Steuerung 2. Siemens 3. Siemens (Sinumerik 840D sl.) - And so on through 20 rows as listed in the image. #### 9. Perspective and Composition: - **Perspective:** - The image is a top-down view of a single page document. - **Composition:** - The page is structured into a table format which is centrally aligned. - The text is clearly organized with sections separated by lines. #### 10. Contextual Significance: - **Contextual Significance:** - This image appears to be part of a technical document that outlines specifications and supplier information for various components used in production processes. - The table lists specific equipment and systems (such as Steuerungssysteme SPS (PLC), NC-Steuerung) along with their approved suppliers (primarily Siemens) and potential alternative suppliers. - The amendments or notes column provides further specifications or requirements for each component. #### 13. Graph Numbers: - **Detailed Breakdown:** - A total of 20 rows detail various components including control systems, injection systems, robots, cabinets, and safety components. - Each row assigns an item number, a description of the component, the approved supplier, potential suppliers, and any noteworthy comments. ### Conclusion: This structured and detailed table in the image organizes key information about production components and their respective suppliers. It underscores supplier dependability and the specific requirements for various parts of a production system. The table represents a methodical approach to maintain standards and consistency in the production workflow while accommodating precise technical requirements. Checklists like this can ensure streamlined operations and uphold quality control in production environments. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE.pdf Page: 4 Context: # Škoda Auto a.s. Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG Ausgabedatum: 28.01.2020 ## PSZ/1 - Methodik und Standardisierung 1 - H - 20 DE | Nr. | Produktionsanlagen/Komponenten | Lieferantenfreigabe | Potentielle Lieferanten | Anmerkungen | |-----|-----------------------------------------------|--------------------------------|----------------------------------------|------------------------------------| | 21 | Induktionssensoren, Positionsschalter und | Balluff, IFM Electronic | Sick | Spezifikation Škoda Auto a.s. | | | Endschnaller | | | | | 22 | Klemme und Klemmzubehör | Phoenix Contact, Wago | Siemens | Spezifikation Škoda Auto a.s. | | 23 | Durchflussmesser und Thermometer | IFM Electronic, Hydac | Parker, Bosch Rexroth | Spezifikation Škoda Auto a.s. | | 24 | Sensoren- und Endschalteinrichtung | Balluff - Lumberg | Pepperl+Fuchs | Spezifikation Škoda Auto a.s. | | | Kabel, Stecker und Sensorenzubehör | Mur elektorn | | | | 25 | Stecker – schwer und leicht | Harting, Phoenix Contact, Weidmüller | Murrelektronik | | | 26 | Lichtsignalisierung – Blaulicht und | Murrelektronik | Siemens | | | | Signalleuchten | | | | | 27 | Nockensicherheitschalter | Schmersal | Balluff | | | 28 | Sicherheitsschalter an Schutzüren, Fenster usw. | Pilz, Schmersal | Euchner | Spezifikation Škoda Auto a.s. | | 29 | Sicherheitsystem und Sicherheitsmodule | Pilz, Siemens | Schneider Electric | Pilz (PNOZsigma), Siemens (S7 3xxF) | | 30 | Mechanisches Endschnaller | Balluff, Siemens | Euchner | Spezifikation Škoda Auto a.s. | | 31 | Installationskabel | LAPP Kabel | Hellukabel | | | 32 | Hochflexible Kabelzueleme | LAPP Kabel | Hellukabel | | | 33 | Überspannungsschutzelemente | Hakel | ABB | | | 34 | Kabelkanäle und -rinnen | OBO-Bettermann, Niedax | Kopos Kolin | | | 35 | Energiespeichende Kabelbieten | Murrelektronik | Brevetti | | | 36 | Optische Sensoren | IFM, Keyence | Sick | Spezifikation Škoda Auto a.s. | | 37 | Kamerabasierte Messsysteme | Cognex, Keyence, Sick | | | | 38 | Wegmesssysteme, linear, Winkel | HEIDENHAIN | | | | 39 | Reservespeisungsquellen | Siemens, APC, Murrelektronik | Phoenix Contact | | | 40 | Drucksensoren | Rexroth, Parker, IFM | Hydac | | Seite 4 von 4 Image Analysis: ### Detailed Examination of the Visual Content: #### 1. Localization and Attribution: - **Image Identification**: Pages contain a single image. - **Image Number**: Image 1 #### 4. Text Analysis: - **Title**: "Richtlinie für die Vereinheitlichung von Elementen Projekt Erneuerung der Produktionsanlagen im Bereich PKG" - **Subtitle**: "1 - H - 20 DE" - **Date**: "Ausgabedatum: 28.01.2020" - **Company Name**: "Škoda Auto a.s." - **Table Content**: - **Column Headers**: Nr., Produktionsanlagen/Komponenten, Lieferantfreigabe, Potentielle Lieferanten, Anmerkungen - **Row Entries**: 1. 21: Induktionssensoren, Positionsschalter und Endschalter | Balluff, IFM Electronic | Sick | Spezifikation Škoda Auto a.s. 2. 22: Klemme und Klemmenzubehör | Phoenix Contact, Wago | Siemens | Spezifikation Škoda Auto a.s. 3. 23: Durchflussmesser und Thermometer | IFM Electronic,Hyac | Parker, Bosch Rexroth | Spezifikation Škoda Auto a.s. 4. 24: Sensoren- und Endschalterinstallation Kabel, Stecker und Sensorenzubehör | Balluff - Lumberg Nur elektronik | Pepperl + Fuchs | Spezifikation Škoda Auto a.s. 5. 25: Stecker – schwer und leicht | Harting, Phoenix Contact, Weidmüller | Murrelektronik | 6. 26: Lichtsignalisierung – Baulichter und Signalleuchten | Murrelektronik | Siemens | 7. 27: Nockenschalterschutz | Schmersal | Balluff | 8. 28: Sicherheitsschalter an Schutztüren, Fenstern usw. | Pilz, Schmersal | Euchner | Spezifikation Škoda Auto a.s. 9. 29: Sicherheitssystem und Sicherheitsmodule | Pilz, Siemens | Schneider Electric | Pilz (PNOZsigma), Siemens (S7 3xxF) 10. 30: Mechanische Endschalter | Balluff, Siemens | Euchner | Spezifikation Škoda Auto a.s. 11. 31: Installationskabel | LAPP Kabel | Helukabel | 12. 32: Hochflexible Kabel | LAPP Kabel | Helukabel | 13. 33: Überspannungsschutzelemente | Hakel | ABB | 14. 34: Kabelkanäle und -rinnen | OBO-Bettermann, Niedax | Kopos Kolin | 15. 35: Energiebewiegende Kabelketten | Murrplastik, Brevetti | Kabelschlepp | 16. 36: Optische Sensoren | IFM, Keyence | Sick | Spezifikation Škoda Auto a.s. 17. 37: Kameraerfassungssysteme | Cognex, Keyence, Sick | | 18. 38: Wegemesssysteme, linear, Winkel- | HEIDENHAIN | | 19. 39: Reservenovellungsquellen | Siemens, APC, Murrelektronik | Phoenix Contact | 20. 40: Drucksensoren | Rexroth, Parker, IFM | Hydac | #### 5. Diagram and Chart Analysis: - **Table Analysis**: - The table lists various production components (under "Produktionsanlagen/Komponenten"), the approved suppliers (under "Lieferantfreigabe"), potential suppliers (under "Potentielle Lieferanten"), and additional remarks or specifications. - Each row provides detailed information about different components and their associated suppliers. #################### File: Interni%20smernice%20-%20komponenty%20SZ_DE.pdf Page: 4 Context: #### 11. Graph Numbers: - **Row Numbers and Entries**: - 21: "Induktionssensoren, Positionsschalter und Endschalter | Balluff, IFM Electronic | Sick | Spezifikation Škoda Auto a.s." - 22: "Klemme und Klemmenzubehör | Phoenix Contact, Wago | Siemens | Spezifikation Škoda Auto a.s." - 23: "Durchflussmesser und Thermometer | IFM Electronic,Hyac | Parker, Bosch Rexroth | Spezifikation Škoda Auto a.s." - 24: "Sensoren- und Endschalterinstallation Kabel, Stecker und Sensorenzubehör | Balluff - Lumberg Nur elektronik | Pepperl + Fuchs | Spezifikation Škoda Auto a.s." - 25: "Stecker – schwer und leicht | Harting, Phoenix Contact, Weidmüller | Murrelektronik" - 26: "Lichtsignalisierung – Baulichter und Signalleuchten | Murrelektronik | Siemens" - 27: "Nockenschalterschutz | Schmersal | Balluff" - 28: "Sicherheitsschalter an Schutztüren, Fenstern usw. | Pilz, Schmersal | Euchner | Spezifikation Škoda Auto a.s." - 29: "Sicherheitssystem und Sicherheitsmodule | Pilz, Siemens | Schneider Electric | Pilz (PNOZsigma), Siemens (S7 3xxF)" - 30: "Mechanische Endschalter | Balluff, Siemens | Euchner | Spezifikation Škoda Auto a.s." - 31: "Installationskabel | LAPP Kabel | Helukabel" - 32: "Hochflexible Kabel | LAPP Kabel | Helukabel" - 33: "Überspannungsschutzelemente | Hakel | ABB" - 34: "Kabelkanäle und -rinnen | OBO-Bettermann, Niedax | Kopos Kolin" - 35: "Energiebewiegende Kabelketten | Murrplastik, Brevetti | Kabelschlepp" - 36: "Optische Sensoren | IFM, Keyence | Sick | Spezifikation Škoda Auto a.s." - 37: "Kameraerfassungssysteme | Cognex, Keyence, Sick" - 38: "Wegemesssysteme, linear, Winkel- | HEIDENHAIN" - 39: "Reservenovellungsquellen | Siemens, APC, Murrelektronik | Phoenix Contact" - 40: "Drucksensoren | Rexroth, Parker, IFM | Hydac" These insights provide a detailed understanding of the Škoda Auto a.s. component and supplier specifications. #################### File: VW%2010130_CS.pdf Page: 1 Context: # VOLKSWAGEN AG ## Prověrka způsobilosti stroje pro měřitelné charakteristiky **VW 101 30** **Datum:** únor 2005 ### Klíčová slova: Maschinenfähigkeitsunter-suchung [**prověrka způsobilosti**], Fähigkeitskennwert [**parameter způsobilosti**], Qualitätsfähigkeit [**kvalitativní způsobilost**], Maschinenfähigkeit [**způsobilost stroje**] --- ### Obsah 1. [Účel a oblast použití](#1-úcel-a-oblast-použití)......................................................... 2 2. [Principy prověrky způsobilosti stroje](#2-principy-proverky-zpusobilosti-stroje)........... 3 3. [Teoretické základy](#3-teoretické-základy)........................................................... 4 3.1 [Distribuční modely](#31-distribuční-modely)......................................................... 4 3.1.1 [Normální rozdělení](#311-normální-rozdělení).................................................. 5 3.2 [Neúplná rozdělení](#32-neuplna-rozdělení)........................................................ 6 3.3 [Ravleighovo rozdělení](#33-ravleighovo-rozdělení).......................................... 6 3.4 [Zjištění způsobilosti](#34-zjištění-způsobilosti).................................................. 7 3.2.1 [Zjištění způsobilosti u definovaných distribučních modelů](#322-zjištění-způsobilosti-u-definovaných-distribučních-modelů)......................................... 16 3.2.2 [Zjištění způsobilosti u nedodržovaných distribučních modelů](#3222-zjištění-způsobilosti-u-nedodržovaných-distribučních-modelů)................................... 16 3.3 [Měřené hodnoty pro způsobilost stroje](#33-měřené-hodnoty-pro-způsobilost-stroje)....................................................... 21 4. [Statistické testy](#4-statistické-testy)................................................................ 21 4.1 [Provádění prověrky způsobilosti stroje](#41-provádění-prověrky-způsobilosti-stroje)........ 21 4.1.1 [Použití zkušebních prostředků](#411-použití-zkušebních-prostředků)................... 22 4.1.2 [Odběr namátkových vzorků](#412-odběr-namátkových-vzorků)............................ 22 4.2 [Zvláštní pravidla pro omezené MFU](#42-zvláštní-pravidla-pro-omezené-mfu)............... 23 4.3 [Vyhodnocení dat](#43-vyhodnocení-dat).......................................................... 25 4.4 [Výběr očekávaného distribučního modelu](#44-výběr-očekávaného-distribučního-modelu)..... 26 4.4.1 [Test odlehlých hodnot](#441-test-odlehlých-hodnot)...................................... 26 4.4.2 [Test změny polohy výroby](#442-test-změny-polohy-výroby)................................. 27 4.4.3 [Test odkazu na stanovené distribuční modely](#443-test-odkazu-na-stanovené-distribuční-modely)............................................................ 27 4.4.4 [Vyhodnocení podle normálního rozdělení](#444-vyhodnocení-podle-normálního-rozdělení)............................................ 28 4.5 [Vyhodnocení podle stanovené hodnoty](#445-vyhodnocení-podle-stanovené-hodnoty).... 28 4.6 [Nepřímé vyhodnocení](#446-nepřímé-vyhodnocení)............................................... 29 4.7 [Posouzení výsledků](#447-posouzení-výsledků).................................................. 29 5. [Optimalizace stroje](#5-optimalizace-stroje)....................................................... 29 5.1 [Náklady na nezpůsobilý stroj](#51-náklady-na-nezpůsobilý-stroj)........................ 30 6. [Příklady](#6-příklady)....................................................................................... 30 7. [Související podklady](#7-související-podklady)......................................................... 33 8. [Odkazy na literaturu](#8-odkazy-na-literaturu)....................................................... 33 9. [Seznam hesel](#9-seznam-hesel)................................................................ 34 --- ### Informace: Úřad TR1 - Normalizace Tel.: +420-123-456-789 #### Fachverantwortung/Obor odpovědnost KIS-05-12 Název Tel.: 792968 Alternativní Tel.: +420-543-961-123 --- **Poznámka:** Veškerá práva vyhrazena. Webové stránky obsahují ochranné známky a názvy výrobků společnosti Volkswagen Konzern. Image Analysis: ### Localization and Attribution **Image 1**: - This is the only image on the page. ### Text Analysis **Image 1:** - The image is in the Czech language. - **Title**: "Proverka zpusobilosti stroje pro meritlené charakteristiky" (translated: "Machine capability test for measurable characteristics"). - **Subheading**: "VOLKSWAGEN AG, VW 101 30" - **Keywords**: "Machinenfähigkeituntersuchung" (machine capability investigation), "Fähigkeitskennwert" (capability index), "Qualitätsfähigkeit" (quality capability). - **Table of Contents**: - 1 Purpose and Application Area - 2 Principles of Machine Capability Testing - 3 Theoretical Background - 3.1 Distribution Models - 3.2 Determining Capability Based on Defined Distribution Models - 3.3 Statistical Tests - 4 Conducting Machine Capability Tests - 4.1 Use of Testing Resources - 4.2 Sample Collection - 4.3 Special Rules for Measurements - 4.4 Data Evaluation - 5 Related Backgrounds - 6 References - 7 Glossary This outlines the technical report structure on machine capability testing within Volkswagen AG. ### Metadata Analysis **Image 1**: - **Klass-Nr.**: 11 00 5. - **Date**: February 2005. - **Laid Down by**: VW. - **Pertains to Norm**: Koncernnorm. - **Length**: 35 pages. - **Source**: "Quelle: NOLIS (Norm vor Anwendung auf Aktualität prüfen), Check standard for current issue prior to usage." ### Graph and Trend Analysis **Image 1**: - No graphs or trends are visible in the image. ### Process Flows (Ablaufprozesse) **Image 1**: - **Included process descriptions**: - Determining capability based on various distribution models. - Statistical tests involved in machine capability evaluation. - Specific procedures for data evaluation and processing. - Documentation and reporting of the capability tests. #################### File: VW%2010130_CS.pdf Page: 1 Context: ### Prozessbeschreibungen (Process Descriptions) **Image 1**: - The table of contents implies detailed descriptions of the steps taken to evaluate machine capabilities. This includes collecting samples, using testing resources, statistical assessments, and special rules for data collection and evaluation. ### Contextual Significance **Image 1**: - This document appears to be part of a technical standard or guideline manual from Volkswagen AG, outlining the procedures for evaluating machine capabilities. This could form part of internal quality assurance and process optimization efforts. The significance is likely centered around maintaining high standards of production efficiency and product quality within the company. ### Tables **Image 1**: - No tables are visible in the image. ### Perspective and Composition **Image 1**: - Perspective: The image is a direct, upright scan or photograph of a document. - Composition: It focuses on centering the document for clear visibility of the text and structure, designed for easy reading and reference. ### Anomaly Detection **Image 1**: - There do not appear to be any anomalies or unusual elements in this image. ### Color Analysis **Image 1**: - The color scheme is black text on a white background, typical for documents to ensure readability and emphasis on information. ### Summary The analyzed image is a cover page of a technical report from Volkswagen AG detailing the processes and guidelines for conducting machine capability tests on measurable characteristics. The document is technical in nature, meant for internal use, and emphasizes thorough procedural instructions. #################### File: VW%2010130_CS.pdf Page: 2 Context: # Úvod Posouzení způsobilosti stroje z hlediska sledovaných měřitelnych výrobních charakteristik je důležitým předpokladem pro splnění stanovených kvalitativních požadavků. Pro mnoho praktických případů pro způsobilost však neexistují normy nebo jednotné konečné směrnice, takže se studený případ mohl vyplynout celou řadu různých hodnocení způsobilosti. Tato norma byla tedy zpracována, aby bylo možno provádět prověrky způsobilosti podle jednotných pravidel pro všechny praktické případy a tím byla zajištěna srovnatelnost výsledků. Norma obsahuje v uzavřené formě kompletní teoretické podklady, které jsou nutné pro použití a interpretaci. Pouze statistické testy, které již byly podrobně popsány v normách nebo odborné literatuře, jsou uvedeny pouze pomocí odkazu. Cílem prověrky způsobilosti stroje podle této normy počítačový program, ve kterém jsou realizovány popsané algoritmy. Pokud je takový program k dispozici, může se vycházet z této normy i v podstatě na ustanovení oddílu 4 a v případě potřeby si může nalistovat teoretické poznatky. Nejduležitější podmínky jsou naproti tomu: 1. 4 - Odrážení namátkových vzorků 2. 4.5 - Dokumentace 3. 4.6 - Posouzení výsledků V oddílu 5 jsou navíc uvedeny příklady, které mají sloužit jako pomůcka pro posouzení výsledků. # 1 Účel a oblast použití Cílem prověrky způsobilosti stroje je dokumentované posouzení, zda prověřovaný stroj umožňuje bezpečnou výrobu sledovaných charakteristik v rámci definovaných mezních hodnot. V ideálním případě by přitom měly na výrobní proces působit pouze úvahy podmíněným strojem. Jak a za jakých předpokladů je nutno provádět prověrky způsobilosti stroje, je předmětem této normy. Je použitelné na libovolné průběžné (měřitelné) výrobní charakteristiky. 1. Níže pro tento druh charakteristik uveden název „měřitelné charakteristiky“ místo názvu „průběžné charakteristiky“ uvedeného v DIN, proto je tento výraz ze VW zajištěn. Image Analysis: Here is the detailed analysis of the provided image: ### Localization and Attribution: - **Image 1** is located at the top of the page, occupying the entire space of the page. ### Text Analysis: - The image is a document page written in Czech, consisting primarily of text. - **Heading:** - The first section headings are "Úvod" (Introduction) and "Účel a oblast použití" (Purpose and Scope of Use). - **Content:** - **Introduction:** - Describes that the inspection of the machine's capability in terms of monitored measurable production characteristics is a necessary prerequisite for meeting set qualitative requirements. - Indicates that previous verifications were not standardized and lacked a unified guideline. - Explains that the included standard was developed to provide a common framework to ensure the verifications' validity. - **Procedure Sections:** - It lists various sections/references within the document for further procedures: - **4.2**: "Odběr namátkových vzorků" (Random Sampling) - **4.5**: "Dokumentace" (Documentation) - **4.6**: "Posouzení výsledků" (Evaluation of Results) - Additionally, examples are provided in section V to aid in the evaluation. - **Purpose and Scope of Use:** - States the aim of the verification is to document whether the tested machine allows for the safe production of monitored characteristics within defined limits. - Specifies that ideally, the production process should only be influenced by the machine. - Discusses the prerequisites necessary for conducting the verification of the machine's capability according to this standard. - Indicates that the standard is applicable to any measurable production characteristic in continuous production. ### Contextual Significance: - The document appears to be a technical or procedural manual related to manufacturing or production quality assessment, specifically for the Volkswagen (VW) corporation. - The detailed instructions and standard references suggest it is used by professionals to ensure consistency and reliability in machine evaluations within the production environment. #################### File: VW%2010130_CS.pdf Page: 3 Context: # 2 Princip prověrky způsobilosti stroje Na základě náhodných vlivů vyplývajících z výroby různých druhů stejných druhů pomocí prověřovaného stroje zásadně rozdílné hodnoty sledovaných charakteristik. Tyto hodnoty charakteristiky \(S\) jsou v závislosti na kvalitě výroby rozptylené okolo polohy podmíněné systematickými vlivy. Proto se prověřuje, jak dobře souhlasí rozdělení hodnot charakteristiky s tolerančním intervalem definovaným konstruktorem (obrázek 1). Výhodnocení tohoto je vyjádřeno parametry způsobilosti \(C_p\) a \(C_{pk}\) (kdž solo kapacity), přičemž hodnota \(C_{pk}\) zohledňuje polohu výroby rozptylu a hodnota \(C_p\) také polohu výroby. Tyto charakteristiky musí být minimálně tak velké jako definované mezní hodnoty, aby byl splněn požadavek na způsobilost výrob. Pro zjištění charakteristiky způsobilosti z hlediska sledované charakteristiky je nutno zhodnotit možné identifikační podmínky kategorií vlivu materiál, člověk, metoda a prostředí, abychom mohli zjistit pozici vůči stroji. Z tohoto vzorku se v souladu s očekáváním vhodně pohybuje v hranice intervaluu spolehlivosti \(X_{13,5}\), \(X_{99,865}\), což zahrnuje soubor hodnot charakteristik (teoreticky nekonečný počet) a porovná se s intervalem stanovený tak, že podle hodnot do jednotlivých oblastí rozptylu na obě strany vždy \(p_e = 0,135\). Na základě kontroly, zda hodnoty charakteristiky odpovídají očekávané zakonitosti. ## Tolerance ![Obrázek 1 - Příklad rozdělení hodnot charakteristiky v rámci definovaného tolerančního intervalu](path_to_image) \[ \text{Hodnota charakteristiky} = p_{e} \quad G_L \quad G_U \] 2. Pojem hodnoty charakteristiky nesmí být zaměňován s měrnou hodnotou, protože posléze uvedený pojem obsahuje v porovnání s giveny určitou nejasnost. 3. Pro označení mzněných hodnot ji přípustné taktéž USG, OSG nebo USL, OSL nebo Tu, To. Image Analysis: ### Localization and Attribution: 1. **Image Numbering**: - **Image 1**: This is located at the middle and integrates textual data with a schematic representation. ### Object Detection and Classification: 2. **Objects Detected**: - **Image 1**: - Object Type: Diagram/Graph - Key Features: Contains a bell curve with values on the X and Y axes, and labels denoting specific points on the curve. ### Scene and Activity Analysis: 3. **Scene Description**: - **Image 1**: Shows a bell curve graph that depicts the distribution of a characteristic in relation to defect rates, with accompanying descriptive text explaining the significance of the distribution. ### Text Analysis: 4. **Extracted Text**: - Document Title: "Princip prověrky způsobilosti stroje" - Section Title: "2" - Detailed Description: The text explains a principle of machine capability verification. It involves statistical parameters, methodical characteristics, and the depiction of a characteristic’s tolerance and distribution. - Key Phrases: "Náhodných vlivů", "výrobek", "díl", "stejného druhu", "hodnoy shvěro", "II". ### Diagram and Chart Analysis: 5. **Diagram Description**: - **Axes**: - X-axis: Hodnota charakteristiky (Characteristic value) - Y-axis: Četnost (Frequency) - **Legend**: - p = 0.135%: This represents the probability or confidence interval marks on both sides of the bell curve. - G_l and G_u: Represent the lower and upper tolerance limits respectively, in a process distribution context. - μ (mu): The mean value of the distribution. - X_0.135% and X_99.865%: Points on the curve indicating edges of the tolerance limits for a specified confidence level. ### Textual Explanation in Image Context: - This diagram illustrates how the distribution of a characteristic falls within a defined tolerance interval, highlighting the areas of very low probability (0.135%) which lie outside the tolerance limits. This is significant for quality control and indicating machine or process capability. ### Trend and Interpretation: 12. **Trends Identified**: - The bell curve indicates a normal distribution where the majority of values cluster around the mean μ and decrease symmetrically towards the tails. This suggests a process that is statistically controlled with most values falling within the specified tolerance limits. ### Tables: 14. **Analyzed Content**: - There is no specific table in the provided visual content. ### Metadata Analysis: 15. **Available Metadata** (from visible content): - Document Identifier: "VW 101 30: 2005-02" - Page Number: "Strana 3" - These references are to the document’s standard and page number. ### Graph and Trend Analysis: 13. **Detailed Analysis**: - Central Value (μ): Represents the average or target value for the characteristic being measured. - Limits (G_l and G_u): Define the acceptable tolerance range for the process. - Probability Cutoffs (p = 0.135%): Define the thresholds at which values are considered outliers in the tolerance interval. ### Abschlussprozesse (Process Flows): This relates to the explanation provided in the text about the verification of machine capability by checking the spread and alignment of production values with the specified tolerance limits. ### Contextual Significance: 10. **Document contribution**: - The image supports the textual explanation of machine capability verification by visually representing how production values are distributed within the specified tolerances, thereby aiding in understanding and adhering to the statistical principles of quality control. This comprehensive analysis integrates various aspects of the provided visual content, highlighting key features, textual context, and diagrammatic interpretation to provide detailed insights into the information conveyed in the image. #################### File: VW%2010130_CS.pdf Page: 4 Context: # 3 Teoretické podklady ## 3.1 Distribuční modely Rozdělení hodnot charakteristik lze pro většinu druhů výrobních charakteristik popsat distribučním modelem. Tak lze většinou dvourozměrné tolerované výrobní charakteristiky, např. délkové rozměry, průměr a kručící moment, založit na normálním rozdělení. Rozptyl jednostranného nahoru tolerované výrobní charakteristiky lze oproti tomu zpravidla popsat pomocí Weibullova nebo Rayleighova rozdělení. Tak lze např. Weibullovo rozdělení použít pro druhy charakteristik rovnovážnosti, asymetrie a Rayleighovo rozdělení pro druhy charakteristik poloha, soustředěnost. ### 3.1.1 Normální rozdělení #### Funkce hustoty pravděpodobnosti Funkce hustoty pravděpodobnosti (zkráceně funkce hustoty) normálního rozdělení, která je graficky znázorněna v obrázku 2, zní: $$ f(x) = \frac{1}{\sigma\sqrt{2\pi}} e^{-\frac{(x - \mu)^2}{2\sigma^2}} \tag{1.1} $$ kde \(s\) parametry průměrná hodnota \(\mu\) a směrodatná odchylka \(\sigma\), které charakterizují polohu a šířku rozdělení, přičemž mocnina standardní odchylky \(\sigma^2\) je označována jako rozptyl. ![Obrázek 2 – Funkce hustoty pravděpodobnosti normálního rozdělení](link-to-image) **Zdroje:** 1. Informace jsou převzaty z dokumentu VW 101 30: 2005-02. Image Analysis: ### Analysis of the Visual Content: #### Localization and Attribution: - **Image**: There is a single image on the page, which will be referred to as **Image 1**. - **Position**: The image is located at the bottom section of the page. #### Object Detection and Classification: - **Image 1**: This image contains a graph depicting a normal distribution curve. The following objects are identified and classified: - **Graph**: A bell-shaped curve indicating a normal distribution (Gaussian distribution). - **Labels and Text**: The x-axis, y-axis, and specific points along the curve are labeled. - **Markers**: Specific points such as the mean (μ) and standard deviations (σ) are indicated. #### Scene and Activity Analysis: - **Image 1**: The scene is an illustration of the normal distribution function in a mathematical or statistical context. The main activity is the depiction of the distribution probability density function. #### Text Analysis: - **Text Detected**: - "Strana 4" - "VW 101 30: 2005-02" - "3 Teoretické podklady" - "3.1 Distribuční modely" - "3.1.1 Normální rozdělení" - "Funkce hustoty pravděpodobnosti (zkráceně funkce hustoty) normálního rozdělení..." - Formula for normal distribution \( f_v(x) = \frac{1}{\sigma \sqrt{2\pi}} e^{-\frac{ (x-\mu)^2}{2\sigma^2}} \) - Several key parameters and points specified such as "μ-4σ", "μ-3σ", "μ-2σ", "μ-σ", "μ", "μ+σ", "μ+2σ", "μ+3σ", "μ+4σ". - "Obrázek 2 – Funkce hustoty pravděpodobnosti normálního rozděleni" - **Contextual Explanation**: - The text explains the normal distribution density function. Formula (1.1) provides the mathematical definition, while the graph visually represents this function indicating key statistical markers like the mean (μ) and different standard deviations (σ) from the mean. #### Diagram and Chart Analysis: - **Image 1**: - **Axes and Scales**: - **X-axis (Horizontal)**: Represents the characteristic value (Hodnota charakteristiky). - **Y-axis (Vertical)**: Represents the probability density (Hustota pravděpodobnosti). - **Legend and Markers**: - Indicates different points such as "μ", "μ-σ", "μ+σ", etc., representing mean and standard deviations. - **Key Insights**: - Shows typical bell-curve shape of normal distribution. - Indicates inflection points and how the probability density changes around the mean. - Significance of values at "μ", "μ±σ", "μ±2σ", etc. percentages at each specified point (e.g., 0.135% at "μ ±4σ"). #### Graph Numbers: - **Data Points** (Approximations due to the nature of labeling): - **At μ**: Maximum probability density. - **At μ±σ**: Probabilities decrease significantly. - **External Points**: 0.135% likelihood at "μ±4σ". #### Color Analysis: - **Image 1**: - **Color Composition**: Primarily black and white. - **Dominant Colors**: Black (for text and lines) on white background. - **Impact on Perception**: Ensures clear visibility and emphasis on graph and text for analytical purposes. #### Perspective and Composition: - **Perspective**: Frontal, straight-on view. - **Composition**: Centralized graph with explanatory text surrounding it, making it effective in demonstrating the concept clearly. #### Contextual Significance: - **Image 1**: Contributes significantly to the text's explanation by visually depicting the mathematical concept of normal distribution, aiding in understanding and retention. ### Summary: The document discusses theoretical underpinnings of statistical distribution models, specifically focusing on the normal distribution. The included graph is critical for illustrating key concepts and providing a visual reference for the probability density function of the normal distribution. The text serves to elucidate the mechanics and importance of these statistical markers and their practical applications. #################### File: VW%2010130_CS.pdf Page: 5 Context: # Jako pravděpodobnost lze interpretovat Jako pravděpodobnost lze interpretovat v obrázku 2 podíl plochy pod grafem ve sledovaném intervalu. Pravděpodobnost, že se hodnota charakteristiky x bude nacházet v základním souboru, který je maximálně tak velký, jako sledovaná mezní hodnota \(x_p\), je tak uváděna primitivní funkcí – funkcí rozdělení. Ta zní pro normální rozdělení: \[ F_x(x) = \int_{-\infty}^{x} f_x(u) \, du \tag{1.2} \] Příčina: \[ f_x(x) = \frac{dF_x(x)}{dx} \tag{1.3} \] a pro všechny hodnoty \(x\) platí \(f_x(x) \geq 0\). ## Transformace \[ u = \frac{x - \mu}{\sigma} \tag{1.4} \] Vyplněte (2.1) hustota pravděpodobnosti standardizovaného normálního rozdělení: \[ \phi(u) = \frac{1}{\sqrt{2\pi}} e^{-\frac{u^2}{2}} \tag{1.5} \] a distribuční funkce: \[ \Phi(u) = \int_{-\infty}^{u} \phi(t) \, dt \tag{1.6} \] se standardní odchylkou \(\sigma = 1\). ### 3.1.2 Weibullovo rozdělení Weibullovo rozdělení vzniká přeložením funkce hustoty normálního rozdělení na nulovém bodě, přičemž hodnoty funkce větší od bodu přeložení se přitukují v bodu správno od nich. Distribuční funkce a funkce rozdělení pravděpodobnosti Weibulova rozdělení tak zní: \[ f(x) = \frac{1}{\sigma} \left(\frac{x - H_m}{\sigma}\right)^{\beta - 1} e^{-\left(\frac{x - H_m}{\sigma}\right)^\beta} \quad \text{pro } x \geq 0 \tag{1.7} \] \[ F(x) = 1 - e^{-\left(\frac{x - H_m}{\sigma}\right)^\beta} \tag{1.8} \] **Příčina:** - \(H_m\): Střední hodnota původního normálního rozdělení, která označuje systematický posun nulového bodu - \(\sigma\): Standardní odchylka původního normálního rozdělení - \(\Phi\): Distribuční funkce standardizovaného normálního rozdělení Image Analysis: ### Text Analysis 1. **Localization and Attribution:** - **Image Number:** Image 1 - This is the only image on the page. 2. **Text Analysis:** - **Detected Text:** - The text is written in Czech. - The headline at the top right indicates the document section, "Strana 5" (Page 5) with a code "VW 101 30: 2005-02". - The main part of the text explains probabilistic concepts and distributions. - **Mathematical Formulas and Equations:** - Several mathematical formulas and equations are present, labeled from (1.2) to (1.8). - (1.2) Integral equation for cumulative distribution function \( F_{W}(x) \). - (1.3) Property of the integral of the probability density function over its entire range. - (1.4)Transforming variable \( u = \frac{x - \mu}{\sigma} \). - (1.5) Normal distribution density function \( \varphi(u) \). - (1.6) Distribution function \( \Phi_{0}(u_{α}) \). - (1.7) and (1.8) Relate to Weibull distribution. - **Section Title:** - Another title reads "Weibullovo rozdělení", which translates to "Weibull distribution". - **Subsection and Reference Equations:** - The document contains references to specific subsections (e.g., 3.1.2), indicating structured content about probability distributions. - **Key Significance:** - This context is likely educational or instructional, focusing on probability and statistical distributions, specifically the normal and Weibull distributions. ### Scene and Activity Analysis 1. **Scene Description:** - The scene is a structured document page with textual and mathematical content. - There are no visual elements apart from text and mathematical formulas. ### Diagram and Chart Analysis 1. **Net Content:** - No diagrams or charts are included within this image. The focus is entirely on explanatory text and formulas. ### Process Descriptions (Prozessbeschreibungen) 1. **Process Descriptions:** - The document explains the process of calculating probabilities using the normal and Weibull distributions. - **Normal Distribution Process:** - Describes how to derive the density function and cumulative function. - **Weibull Distribution Process:** - Details the generation of the Weibull distribution from the normal distribution, highlighting shifts in the distribution's mean and deviation. ### Metadata Analysis 1. **Metadata Review:** - No metadata is explicitly visible within the image, and therefore not analyzed. ### Trend and Interpretation 1. **Trends and Interpretations:** - Trend in focus on probability distributions highlighting the methods for density and cumulative function formulations for normal and Weibull distributions. - Educative emphasis on the properties and transformations necessary for statistical analyses. ### Tables 1. **Table Analysis:** - No tables are present in the image. In conclusion, the image is a page from an educational or scientific document discussing the normal and Weibull distributions in the context of probability theory. The detailed mathematical formulas are used to explain the calculation and transformation processes for these distributions. The primary focus is on theoretical understanding rather than practical application. #################### File: VW%2010130_CS.pdf Page: 6 Context: # Strana 6 VW 101 30: 2005-02 Obrázek 3 ukazuje funkce rozdělení pravděpodobnosti, která vyplyne ze složení hustoty normálního rozdělení při různých posunech nulového bodu. ![Obrázek 3 – Funkce hustoty Weibullova rozdělení s různými posuny nulového bodu](path/to/image) **Střední hodnota a rozptyl Weibullova rozdělení zná:** \[ \mu = \mu_H + \left( \frac{H_N}{\sigma_N} \right) - \frac{2 - \sigma_N}{\sqrt{2\pi}} \] (1.9) \[ \sigma^2 = H_N - \mu^2 \] (1.10) Pro případ nulového bodu \(\mu_N = 0\) vyplyne z (1.9) a (1.10): \[ \mu = -\frac{2 - \sigma_N}{\sqrt{2\pi}} \] (1.11) \[ \sigma^2 = \left( 1 - \frac{2}{\sigma_N} \right) \] (1.12) Jak ukazuje obrázek 3, blíží se Weibullovo rozdělení s rostoucím posunem nulového bodu normálnímu rozdělení. Tak lze pro případ: \[ \frac{\mu}{\sigma} \approx 0 \] (1.13) Weibullovo rozdělení dobře aproximálně nahrazuje normálním rozdělením. Image Analysis: ### Comprehensive Examination of the Visual Content #### 1. Localization and Attribution - **Image Position**: The analyzed visualization, which contains a graph and related mathematical formulas, is centrally located on the page. - **Image Number**: Image 1. #### 2. Object Detection and Classification - **Graph**: Present, labeled "Obrázek 3 - Funkce hustoty Weibullova rozdělení s různými posuny nulového bodu." - **Mathematical Formulas**: Displayed below the graph with sequential numbering. #### 3. Scene and Activity Analysis - **Actors**: No human actors present. - **Activities**: The page primarily involves the examination and explanation of statistical distributions. #### 4. Text Analysis - **Detected Text**: The text is in Czech. Key text includes: - Title: "Obrázek 3 - Funkce hustoty Weibullova rozdělení s různými posuny nulového bodu." - Additional Descriptions: Explanations of mathematical formulas and their notation. - **Content Analysis**: The text is critical for understanding how the Weibull distribution function changes with different zero point shifts. #### 5. Diagram and Chart Analysis - **Graph Analysis**: - **Axes**: - **X-Axis**: "Hodnota charakteristiky" (translated: Characteristic Value) - **Y-Axis**: "Hustota pravděpodobnosti" (translated: Probability Density) - **Trends**: Multiple curves represent Weibull distributions with different zero point shifts. As the shift increases (indicated as \( μ_N \)), the curves diverge and intersect at various points. #### 7. Anomaly Detection - **Possible Anomalies**: No apparent anomalies or unusual elements. The presentation appears standard and consistent with scientific formats. #### 8. Color Analysis - **Color Composition**: Predominantly black and white, with distinct black curves on a white background. This high contrast aids in clarity and comprehension. #### 9. Perspective and Composition - **Perspective**: The image is a frontal view, common for graphs. - **Composition**: Top to bottom flow; the graph at the top is followed by descriptive mathematical explanations. #### 10. Contextual Significance - **Document Context**: The document seems to be a technical or academic piece addressing statistical distributions, likely for educational or research purposes. - **Contribution to Overall Message**: The image and accompanying explanations demonstrate the behavior and calculation of Weibull distribution, especially under varied conditions. This contributes significantly to mathematical or statistical analysis. #### 12. Graph and Trend Analysis - **Analysis of Trends**: - **Data Points**: While specific numeric data points aren't noted on the curves, the intersecting lines and the gradual changes in the curves denote how shifts in the zero point (\( μ_N \)) affect the Weibull distribution shapes. - **Interpretation**: As indicated, the Weibull distribution can approximate normal distribution under certain shifts of the zero point. ### Conclusion The provided image is a detailed graphical and mathematical analysis of the Weibull distribution, specifically examining how shifts in the zero point affect the distribution's density function. The clean presentation, logical flow, and detailed mathematical annotations provide a comprehensive understanding of the distribution's behavior, making it valuable for those studying statistical distributions. #################### File: VW%2010130_CS.pdf Page: 7 Context: # 3.1.3 Rayleighovo rozdělení Rayleighovo rozdělení vyplývá z vektorových hodnot ortogonálních komponent x a y dvourozměrného normálního rozdělení, přičemž pro komponenty jsou předpokládány stejné standardní odchylky. Tento případ nastává u mnoha výrobních charakteristik ve formě radiálních odchylek r od sledovaného bodu nebo sledované osy. ## Funkce hustoty a funkce rozdělení Rayleighova rozdělení obecně zní \[ f_{2}(r) = \frac{1}{2 \pi \sigma_{d}^{2}} e^{-\frac{r^{2}}{2\sigma_{d}^{2}}} \quad \text{pro } r \geq 0 \] (1.14) \[ F_{2}(r) = \int_{0}^{r} f_{2}(t) \, dt = 1 - e^{-\frac{r^{2}}{2\sigma_{d}^{2}}} \] (1.15) přitom: - \(\sigma_{d}\): Standardní odchylka ortogonální složky x a y, ze které vyplývá radiální odchylka r od referenčního bodu nebo od referenční osy - \(z\): Excentricita: Vzdálenost mezi počátkem soustavy souřadnic a středem čtverce Obrázek 4 ukazuje funkce rozdělení pravděpodobnosti Rayleighova rozdělení, které vyplývají z různých excentricit v jednotkách \(\sigma_{d}\). ![Obrázek 4 – Funkce hustoty Rayleighova rozdělení s různými excentricitami](image_link) Střední hodnota a rozptyl Rayleighova rozdělení zní. Image Analysis: ### Image Analysis #### 1. Localization and Attribution: - **Image Position**: The page contains a single image located at the bottom part of the document. - **Image Number**: Image 1. #### 2. Object Detection and Classification: - **Objects Identified**: The image includes a chart or graph. - **Category**: Data visualization. #### 3. Scene and Activity Analysis: - **Scene Description**: The image is of a graph illustrating the probability density functions of Rayleigh distributions with various eccentricities. #### 4. Text Analysis: - **Text Detected**: - "3.1.3 Rayleighovo rozdělení" - "Rayleighovo rozdělení vyplyne z vektorových hodnot ortogonálních komponent x a y dvourozměrného normálního rozdělení, přičemž pro komponenty jsou předpokládány stejné standardní odchylky. Tento případ nastává u mnoha výrobních charakteristik ve formě radiálních odchylek r od sledovaného bodu nebo sledované osy." - "Funkce hustoty a funkce rozdělení Rayleighova rozdělení obecně zní" - Various mathematical formulas and constructs. - "Obrázek 4 ukazuje funke rozdělení pravděpodobnosti Rayleighova rozdělení, které vyplynou z různých excentricit v jednotkách σN." - **Text in Graph**: - "Hustota pravděpodobnosti" - "Hodnota charakteristiky" - Markings on the graph: Z=0, Z=1σN, Z=2σN, Z=3σN - "Obrázek 4 - Funkce hustoty Rayleighova rozdělení s různými excentricitami" - "Střední hodnota a rozptyl Rayleighova rozdělení zní" #### 5. Diagram and Chart Analysis: - **Chart Analysis**: - **Axes**: - X-axis: "Hodnota charakteristiky" (Characteristic Value). - Y-axis: "Hustota pravděpodobnosti" (Probability Density). - **Features**: - Multiple overlaid probability density curves are shown for different eccentricities, indicated by Z=0, Z=1σN, Z=2σN, and Z=3σN. - The chart illustrates how the shape of the Rayleigh distribution varies with changes in eccentricity. #### 8. Color Analysis: - **Color Composition**: The image appears to be in grayscale, with different shades used to differentiate the various curves in the graph. - **Dominant Colors**: Shades of black and gray. #### 9. Perspective and Composition: - **Perspective**: The image is a standard two-dimensional chart view, looking directly at the graph. - **Composition**: The graph is centered at the bottom of the page with clear X and Y axes and labeled curves, making it easy to interpret. #### 10. Contextual Significance: - **Contribution**: This graph is critical for understanding the properties and effects of varying eccentricities on Rayleigh distribution. It supports the textual explanation provided above it and demonstrates the practical application of the theoretical concepts discussed in the document. #### 13. Graph Numbers: - **Data Point Description**: Not explicitly provided, but the curves demonstrate typical behavior expected in Rayleigh distributions: as eccentricity increases, the peak of the probability density decreases and shifts. ### Summary: Image 1 presents a detailed graph depicting the Rayleigh distributions for different eccentricities, enhancing the understanding of related statistical concepts. The text above the graph explains the theoretical background and mathematical foundations, while the graph itself illustrates the practical impact of changing eccentricity values on Rayleigh distribution. The clear, grayscale image effectively communicates complex statistical information in an accessible visual format. #################### File: VW%2010130_CS.pdf Page: 8 Context: # Strana 8 VW 101 30: 2005-02 \[ \mu = \int_{\Gamma} \frac{\partial z}{\partial r} \, dr \tag{1.16} \] \[ \sigma^2 = 2 \alpha z^2 + \mu^2 \tag{1.17} \] Pro případ excentricity \( z = 0 \) vyplývá z (1.14) a (1.15) funkce hustoty a distribuční funkce Weibullova rozdělení s hodnotou parametru tvaru 2: \[ f_{\beta} = \frac{2}{\sigma} \left( \frac{z}{\sigma} \right)^{\beta - 1} e^{-\left( \frac{z}{\sigma} \right)^{\beta}} \tag{1.18} \] \[ F_{\beta}(z) = 1 - e^{-\left( \frac{z}{\sigma} \right)^{\beta}} \tag{1.19} \] a z toho opět střední hodnot a rozptyl \[ \mu = \sigma \left( \frac{\Gamma(1 + 1/\beta)}{\Gamma(1 + 2/\beta)} \right) \tag{1.20} \] \[ \sigma^2 = \sigma^2 \left( \frac{\Gamma(1 + 2/\beta)}{\Gamma(1 + 2/\beta)} - \left( \frac{\Gamma(1 + 1/\beta)}{\Gamma(1 + 2/\beta)} \right)^2 \right) \tag{1.21} \] Rayleighovo rozdělení dobrou aproximaci nahradit normálním rozdělením: \[ \mu = \sigma \sqrt{\frac{\pi}{2}} \tag{1.22} \] ## 3.2 Zjištění způsobilosti Charakteristiky způsobilosti \( c_m \) a \( c_k \) udávají, jak dobře dodržují výrobní výsledky toleranční interval sledované charakteristiky. Pritom je hodnota \( c_n \) zohledněna pouze rozptyl výroby. Poloha výrobky je zohledněna hodnotou \( c_k \). Tím lze na jedné straně vyjádřit, jaká hodnota je při ideální poloze výrobky možná, a na druhé straně lze porovnávat obě hodnoty, jak silné se poloha výrobky vychyluje od požadované hodnoty. Čím větší jsou zjištěné charakteristiky způsobilosti, tím lepší je výroba. Pro zjištění charakteristik způsobilosti existují různé vyhodnocovací vzorce, které je nutno zvolit podle jednotlivého případu. Protože však charakteristiky způsobilosti poskytuje pouze hodnocení hledaných hodnot základního rozdělení, představují pouze odhady hledaných hodnot. Image Analysis: ### Comprehensive Analysis of the Visual Content #### 1. Localization and Attribution: - **Image 1**: - Entire content depicted is a single page, considered as Image 1 for analysis. #### 2. Object Detection and Classification: - **Image 1**: - Key objects: - Mathematical symbols and equations - Text paragraphs - Footnotes or references - Detected objects and their classification: - Equations: \( \mu = \int_{-\infty}^{\infty} r\, f_{R} (r)\, dr \) (1.16) - Text paragraphs in the Czech language. #### 3. Scene and Activity Analysis: - **Image 1**: - The scene represents a technical or academic document, likely a standard or technical report. - The activities involved are passive reading and comprehension activities. #### 4. Text Analysis: - **Image 1**: - Detected text and significance: - Title at the top: "Strana 8" (Page 8) - Document identifier: "VW 101 30: 2005-02" - Sections: - Equations defining various mathematical functions and parameters, focusing on statistical distributions (Weibull distribution, Rayleigh distribution). - Explanation of derivations (equations 1.16 to 1.22) - Section 3.2 titled "Zjištění způsobnosti" (Determination of capacity/competence), discussing parameters for evaluating manufacturing tolerance intervals and their relevance in production. #### 9. Perspective and Composition: - **Image 1**: - The perspective is a direct top-down view, typical for document viewing. - Composition includes mathematical formulas on the top, followed by a descriptive text section. #### 12. Graph and Trend Analysis: - **Image 1**: - While there aren’t explicit graphs, the trends in the equations suggest standard probabilistic functions and statistical distributions. #### 13. Graph Numbers: - **Image 1**: - Equations numbered from (1.16) to (1.22) - each detailing a step in the derivation or formula. **Additional Aspects:** - **Ablaufprozesse (Process Flows):** - Mention of characterization processes in section 3.2 involving \( c_m \) and \( c_{mk} \) parameters. - **Prozessbeschreibungen (Process Descriptions):** - Descriptive process for evaluating production outcomes based on defined statistical tolerances. ### Summary of Key Insights: The image analyzed is a technical or academic document related to statistical evaluation methods in production. It includes a series of mathematical equations that define statistical distributions (Weibull and Rayleigh) and describes a methodology for assessing production capability through tolerance intervals. The text analysis reveals a precise approach to quality control and assurance in manufacturing settings. The overall composition helps in understanding the context of the mathematical derivations, contributing to the document's aim of establishing standard statistical methods in manufacturing processes. #################### File: VW%2010130_CS.pdf Page: 9 Context: # 3.2.1 Zjištění způsobilosti u definovaných distribučních modelů ## 3.2.1.1 Charakteristiky způsobilosti Pro prověřování výrobní charakteristiky, jejíž namátkové vzorky nejsou v rozporu s teoreticky očekávaným distribučním modelem, jsou charakteristiky způsobilosti odhadovány podle příslušného případu (viz také příklady 1 a 2 v oddílu 5) podle následujících vzorců: Charakteristiky způsobilosti pro oboustranně tolerovanou charakteristiku (podle DIN 56319, metoda M4), např. pro délkovou míru: \[ \hat{c}_{m} = \frac{G_u - G_l}{X_{0.95} - X_{0.135}} \] Charakteristiky způsobilosti pro jednoduše nahoře tolerovanou charakteristiku s přirozenou dolní mentní hodnotou rovnou nule, např. radiální házení: \[ \hat{c}_{m} = \frac{G_u - \mu}{X_{0.995} - X_{0.135}} \] Charakteristika způsobilosti pro jednoduše dole tolerovanou charakteristiku, např. pro pevnost v tahu: \[ \hat{c}_{m} = \frac{\mu - G_l}{\mu - X_{0.135}} \] přičemž: - \(G_u, G_l\): maximální rozměr, popř. minimální rozměr - \(\mu\): odhadovaná střední hodnota - \(X_{0.135}, X_{0.995}\): odhadované hodnoty pro hranice intervalu spolehlivosti (kvantily, pod nimiž leží uvedený podíl p naměřených hodnot) Image Analysis: ### Analysis of the Attached Visual Content #### 1. **Localization and Attribution** - **Image 1**: Single image provided. #### 4. **Text Analysis** - **Image 1**: The image contains textual content in Czech that relates to statistical characteristics for evaluating the capability of manufacturing processes with respect to a theoretical distribution model. It includes formulas and explanations for various capability indices. Key points from the text include: - **Section Title**: "Zjistění způsobilosti u definovaných distribučních modelů" (Determination of Capability for Defined Distribution Models). - **Subsection Title**: "Charakteristiky způsobilosti" (Capability Characteristics). - Descriptions of different capability indices and relevant formulas. - Explanation of symbols used in the formulas at the bottom. #### 5. **Diagram and Chart Analysis** - There are no diagrams or charts present in the image. #### 12. **Graph and Trend Analysis** - No graphs are present in the image. #### 13. **Graph Numbers** - Not applicable as there are no graphs present in the image. #### **Additional Aspects** - **Ablaufprozesse (Process Flows)** - No process flows depicted in the image. - **Prozessbeschreibungen (Process Descriptions)** - The text provides descriptions of processes for estimating capability indices. - **Typen Bezeichnung (Type Designations)** - Types of capability indices are described through formulas (e.g., \( \hat{c}_{mk} \)). - **Trend and Interpretation** - The image contains detailed statistical formulas and descriptions for various capability indices. The general trend is an analytical one focusing on the precise quantification and evaluation of manufacturing characteristics relative to distribution model expectations. - **Tables** - No tables are present in the image. ### Detailed Descriptions 1. **Localization and Attribution** - **Image 1**: The entire page is an image located as a single page document. 2. **Object Detection and Classification** - **Image 1**: The primary objects are textual elements comprising paragraphs, formulas, and explanatory notes. 3. **Scene and Activity Analysis** - **Image 1**: The image represents a textual document page, likely from an academic or technical manual on quality control and statistical analysis of manufacturing processes. 4. **Perspective and Composition** - **Image 1**: The image is a scanned page taken from a direct, flat perspective. The composition is structured in a traditional academic format with section headings, formulas, and explanatory text. 5. **Color Analysis** - **Image 1**: The image is grayscale, typical for scanned academic documents. ### Conclusion The image provided is a page from a technical document detailing the statistical evaluation of manufacturing processes' capability indices. The section primarily consists of textual explanations and formulas with no diagrams, charts, or additional graphical elements. The text is in Czech and is aimed at providing precise definitions and calculations related to manufacturing process evaluation. #################### File: VW%2010130_CS.pdf Page: 10 Context: # 3.2.1.2 Odhad statistických parametrů Statistické parametry střední hodnota \( \mu \) a smírodatná odchylka \( \sigma \) základního souboru lze nezávisle na distribučním modelu podle očekávání odhadnout z naměřených hodnot vzorku pomocí vzorců: \[ \mu = \frac{1}{n} \sum_{i=1}^{n} x_i \tag{2.6} \] \[ \sigma^2 = \frac{1}{n - 1} \sum_{i=1}^{n} (x_i - \bar{x})^2 \tag{2.7} \] přičemž: - \( n_p = n_e - n_a \): efektivní rozsah namátkové zkoušky - \( n_a \): zvolený rozsah namátkové zkoušky - \( n = \): počet odlehlých hodnot - \( \hat{\theta} \): i-tá hodnota parametru V případě vyhodnocovaných dat ve formě rozdělení četností tříděných naměřených hodnot, např. v rozčlenění za oblastí jako formy čárek v rozdělení tříd rozsahu hodnot (statistika četností) lze odhadnout parametry \( \mu \) a \( \sigma \) pomocí vzorce: \[ \hat{\mu} = \frac{1}{n} \sum_{k=1}^{K} f_k \cdot x_k \tag{2.9} \] \[ \sigma = \sqrt{\frac{1}{n} \sum_{k=1}^{K} f_k \cdot (x_k - \bar{x})^2} \tag{2.10} \] přičemž: - \( x_k \): střední hodnota k-té třídy - \( f_k \): absolutní četnost naměřených hodnot v k-té třídě (bez mimořádných hodnot) - \( K \): maximální počet naměřených hodnot ## 3.2.1.3 Odhad hranic intervalu spolehlivosti Hranice intervalu spolehlivosti závisí na distribučním modelu a odhadují se následujícím způsobem: ### Hranice intervalu spolehlivosti normálního rozdělení: V případě normálního rozdělení jako vhodného distribučního modelu vyplněnou hodnot zjištěných podle (2.6) a (2.7) popř. (2.9) a (2.10) jako \( \hat{\mu} \) a \( \hat{\sigma} \) pro oblast intervalu spolehlivosti: \[ \hat{I} = \hat{\mu} \pm z_{\alpha/2} \cdot \hat{\sigma} \tag{2.11} \] které opět po dosazení do vzorců (2.1) a (2.2) dají klasické vzorce pro výpočet charakteristik způsobilosti (viz také příklad 1 v oddílu 5). Image Analysis: ### Analysis of Visual Content #### 1. Localization and Attribution - This visual content contains a single page consisting mainly of text and mathematical notations. For the purpose of this analysis, it will be referred to as **Image 1**. #### 4. Text Analysis - **Title and Section Numbers:** - The page begins with "Strana 10", which means "Page 10" in Czech. - Standard reference: "VW 101 30: 2005-02". - Section "3.2.1.2 Odhad statistických parametrů" translates to "Estimation of Statistical Parameters". - **Content Description:** - **Subsection (Statistical Parameters):** - Talks about the mean value (μ) and standard deviation (σ) of a sample. - Equations (2.6) describe the computation of the mean: - \(\hat{μ} = \frac{1}{n_e} \sum_{i=1}^{n_e} x_i\) - Equation (2.7) describes the computation of the standard deviation: - \(\hat{σ}^2 = \frac{1}{n_e - 1} \sum_{i=1}^{n_e} (x_i - \bar{x})^2\) - **Explanation of Terms (Equations and Variables):** - \(n_e\): Effective sample size. - \(n_a\): Chosen sample size. - \(n_o\): Number of outliers. - \(x_i\): i-th observed value. - **Distribution of Frequency Data:** - Equations (2.9) and (2.10) provide methods to estimate parameters with frequency data. - **Interval Estimates (Confidence Interval):** - Section "3.2.1.3 Odhad hranic intervalu spolehlivosti" translates to "Estimation of Confidence Interval Limits". - Equation (2.11) defines boundary estimation using standard deviation: - \(x_{1-α/2} = \hat{x} \pm 3\hat{\sigma}\), assuming a normal distribution. #### 6. Product Analysis - N/A (The page contains no relevant product imagery or descriptions). #### 9. Perspective and Composition - **Perspective:** - The perspective of the image is a straightforward, flat view of a document page, conducive to reading. - **Composition:** - Text is composed in a traditional structured manner, common in technical or scientific documents. - Equations are interspersed within the text, formatted clearly for comprehension. #### 12. Graph and Trend Analysis - N/A (The page contains no graphical plots or trends). #### 13. Graph Numbers - N/A (The page does not contain graphs with data rows). #### Contextual Significance - The page appears to be part of a technical or academic document, specifically focusing on statistical analysis and estimation methods. The context implies it is likely part of a standardized instruction or educational material, possibly related to an engineering or scientific field. - The inclusion of mathematical equations and the focus on statistical parameters suggest the intended audience is individuals with a foundational understanding of statistics. Overall, the detailed text analysis suggests that the document is instructional or explanatory in nature, intended for readers who are learning about or applying statistical methodologies. #################### File: VW%2010130_CS.pdf Page: 11 Context: # Hranice intervalu spolehlivosti Weibullova rozdělení Pro zjištění hranic intervalu spolehlivosti pro Weibullova rozdělení se nejprve podle vzorce (2.6) a (2.7), popř. (2.9) a (2.10) odhadnou veličiny \(\eta\) a \(\sigma\). Pro případ, že \(2 < \frac{\mu}{\sigma} < 3\) se pak z odhadnutých veličin \(\eta\) a \(\sigma\) způsobem odhadu hledají hodnoty parametrů \(\mu_N\) a \(\sigma_N\) příslušného Weibullova rozdělení: Z rovnice (1.9) získáme funkci \[ \frac{\bar{\mu}}{\sigma} = \frac{\left( \frac{\partial \bar{\mu}}{\partial \eta} \right) }{\left( \frac{\partial \bar{\mu}}{\partial \sigma} \right)} + 2 \cdot \frac{\eta}{\sigma} \cdot \frac{e^{-\frac{\eta}{\sigma}}}{\sqrt{2\pi}} \cdot \frac{\partial L}{\partial \sigma} \tag{2.12} \] Pomocí rovnice (1.10) z toho vyplývá funkce \[ \mu = \psi \cdot \left( \frac{\bar{\mu}}{\sigma} \right) \tag{2.13} \] Z rovnic (1.11) a (1.12) vyplývá podmínka \[ \frac{\bar{\mu}}{\sigma} = \frac{\sqrt{2}}{ \sqrt{\pi - 2}} = 1.3236 \tag{2.14} \] Hledané hodnoty parametrů Weibullova rozdělení tak lze za podmínek (2.14) odhadnout pomocí \[ \sigma_N = \left( 1 + \left( \frac{\bar{g}}{\eta} \right)^2 \right) \cdot \left( \frac{\bar{\psi}}{\eta} \right)^2 \tag{2.15} \] \[ \mu_N = \bar{\alpha} \left( \frac{\bar{g}}{\eta} \right) - \delta_N \tag{2.16} \] přičemž \[ \bar{g} = \text{inverzní funkce } k \tag{2.17} \] Pro případ, že by poměr \(\mu / \sigma\) na základě náhodných odchylek parametrů vzorků byl menší než mezní hodnota 1.3236 z podmínky (2.14), je poměr \(\mu / \sigma\) nastaven na tuto mezní hodnotu, při které vyplynou následující hodnoty parametrů: \[ \mu_N = 0 \text{ podle vzorce (1.12)} \] \[ \sigma_N = \sqrt{\frac{\pi}{\pi - 2}} \cdot 1.659 \cdot \hat{g} \tag{2.17} \] Image Analysis: ### Comprehensive Examination of the Visual Content: #### 1. **Localization and Attribution:** - Only one page/image is present. - Thus, this is **Image 1**. #### 2. **Object Detection and Classification:** - The primary objects detected in the image are as follows: - **Text**: Primarily in the Czech language, with various mathematical equations. - **Mathematical Notations**: Numerous equations and variables related to the Weibull distribution. #### 4. **Text Analysis:** - **Detected Text (in Czech):** - Title: "Hranice intervalu spolehlivosti Weibullova rozdělení" - Description of methodology for deriving confidence intervals for the Weibull distribution. Reference to equations and conditions for calculating μ̂ and σ̂. - Equations (e.g., equations 2.12, 2.13, 2.14, etc.) are outlined throughout the text. - Mention of parameters: μ̂, σ̂, ψ, θ, ξ, k, and specific constants. - Application of the method for different cases, including references to formulas 2.15 and 2.17. - **Content Analysis and Significance:** - The text details the process of determining confidence intervals for the Weibull distribution. - Equations provided in the text, along with their conditions and necessary adjustments, are vital for statistical calculations related to reliability engineering and life data analysis. - The significant constants and functions derived play a crucial role in achieving accurate estimation. #### 8. **Color Analysis:** - The entire page is monochrome (black text on white background). - Dominant colors: Black and white. - Impact: Monochrome setup ensures clarity and focus on mathematical content without distractions. #### 9. **Perspective and Composition:** - **Perspective:** - Straight-on view of the text and equations, similar to an academic paper. - **Composition:** - Structured and organized with sections, equations, and explanatory text. Equations are referenced and numbered systematically. - Uses mathematical notation standards, ensuring clarity for readers familiar with the subject matter. #### 11. **Metadata Analysis:** - **Metadata present on the page:** - "Strana 11" (Page 11) - Document identifier: "VW 101 30: 2005-02" - **Contribution to Image Analysis:** - These metadata elements indicate that this is part of a larger document, likely a technical paper or a standard reference document dated February 2005. #### 12. **Graph and Trend Analysis:** - Although no explicit graphs are visible, the series of equations and their dependencies could represent trends in the data if plotted. - Interpretation of equations and relationships between variables can direct trends in reliability and quality metrics calculated from the Weibull distribution. ### Additional Aspects: #### **Process Descriptions (Prozessbeschreibungen):** - Detailed steps are described for deriving confidence intervals of the Weibull distribution. This includes: - Use of initial equations. - Manipulations to reach simplified forms. - Final conditions for variables. #### **Typen Bezeichnung (Type Designations):** - Various types of functions and variables such as: - Inverse function "ξ"} - Functions "ψ" and "θ". - Conditional variance "σ̂" #### **Trend and Interpretation:** - Trends in the equations provided indicate a relationship between the mean and variance of the Weibull distribution under different conditions. This is significant for reliability analysis, helping in maintenance planning and lifespan estimation. #### **Tables:** - There are no explicit tables in the image. ### Summary: The page provides a detailed explanation and mathematical derivations for calculating confidence intervals for the Weibull distribution. It uses a systematic approach with labeled equations and clear methodological steps. This is crucial for statistical analyses in fields such as reliability engineering. The metadata indicates this is part of a larger technical document. #################### File: VW%2010130_CS.pdf Page: 12 Context: # Strana 12 VW 101 30: 2005-02 Souvislost mezi hodnotami parametrů \( \lambda_N \) a \( \sigma_W \) Weibullova rozdělení a statistických veličin \( \mu \) a \( c \) je graficky znázorněno na obrázku 5 vztaženo na \( c \). ![Obrázek 5 – Relativní poloha parametrů Weibullova rozdělení v závislosti na relativní poloze](obrazek5.png) Pro přizpůsobené Weibullovo rozdělení lze pak čísleně zjistit hranice intervalů spolehlivosti, jejichž závislost na relativní poloze je znázorněna v obrázku 6. ![Obrázek 6 – Relativní hranice intervalů spolehlivosti Weibullova rozdělení v závislosti na relativní poloze](obrazek6.png) Image Analysis: ### Localization and Attribution 1. **Image 1:** - Position: Top of the page - Description: Chart showing relative position of Weibull distribution parameters. 2. **Image 2:** - Position: Bottom of the page - Description: Chart illustrating the relative confidence interval boundaries of the Weibull distribution. ### Object Detection and Classification #### Image 1: - **Objects:** - Graph. - Axes (X and Y). - Curves. #### Image 2: - **Objects:** - Graph. - Axes (X and Y). - Curve. ### Scene and Activity Analysis: #### Image 1: - **Scene Description:** - The image shows a line graph that represents the relationship between relative position and relative parameter values of the Weibull distribution. - **Activities:** - Analysis of the relationship between different statistical parameters in Weibull distribution. #### Image 2: - **Scene Description:** - The image displays a graph that shows the relative confidence interval boundaries as a function of relative position for a Weibull distribution. - **Activities:** - Analysis of the confidence interval's behavior with changes in relative position. ### Text Analysis: - **Image 1 Text:** - Graph Title: "Obrázek 5 – Relativní poloha parametrů Weibullova rozdělení v závislosti na relativní poloze" - Axis Labels: - X-axis: "relativní poloha μ/σ" - Y-axis: "relativní distribuiční parametr" - Other Text: "μ_N / σ", "σ_N / μ" - **Significance:** - The graph demonstrates how the Weibull distribution parameters change with the relative position. - **Image 2 Text:** - Graph Title: "Obrázek 6 – Relativní hranice intervalu spolehlivosti Weibullova rozdělení v závislosti na relativní poloze" - Axis Labels: - X-axis: "relativní poloha μ/σ" - Y-axis: "relativní hranice intervalu spolehlivosti" - Other Text: "X_99.865% / σ", "X_0.135% / σ" - **Significance:** - The graph illustrates how the confidence intervals' limits change with the relative position in a Weibull distribution. ### Diagram and Chart Analysis: #### Image 1: - **Axes and Scales:** - X-axis: Relative position (μ/σ) ranging approximately from 1.2 to 3.0. - Y-axis: Relative distribution parameter, ranging from 0 to 2.5. - **Curves:** - There are multiple curves indicating different parameter relationships. #### Image 2: - **Axes and Scales:** - X-axis: Relative position (μ/σ) ranging from approximately 1.2 to 3.0. - Y-axis: Relative confidence interval boundary, ranging from 0 to 7. - **Curve:** - There is a single curve indicating the boundary of the confidence interval. ### Trend and Interpretation: #### Image 1: - **Trend:** - The distribution parameters increase with the relative position. #### Image 2: - **Trend:** - The confidence interval boundaries show a slight increase as the relative position increases. ### Contextual Significance: - **Overall Theme:** - The images contribute to the understanding of how Weibull distribution parameters and confidence intervals vary with changes in relative position. This information is useful in reliability engineering and statistical analysis for understanding the behavior of materials or systems described by the Weibull distribution. ### Graph and Trend Analysis: #### Image 1: - The plotted curves show different relationships between Weibull distribution parameters and their relative positions, indicating how these parameters interact with one another under different circumstances. #### Image 2: - The graph shows the change in the boundaries of confidence intervals for the Weibull distribution as the relative position varies, which is crucial for assessing the reliability with a certain confidence level. #################### File: VW%2010130_CS.pdf Page: 13 Context: Pro primé zjištění charakteristik \(\mu_N\) a \(\sigma\) z charakteristik \(\mu\) a \(\sigma\) pro \(1.3236 < \frac{\sigma}{\mu} < 3\) s dostatečnou přesností použít následující aproximaci jako inverzní funkci vztahu (2.13) (chyba vztažena na \(\sigma\) méně než 0,1): \[ \frac{\sigma}{\mu} = 1.604 \left( \frac{a}{1.3236} \right) + 0.634 \left( \frac{a}{1.3236} \right)^2 \] Navíc může být zjištěn hranic intervalů spolehlivosti pro \(1.3236 < \frac{\sigma}{\mu} < 3\) provedením pomoci následující aproximace (chyba vztažena na \(\sigma\) je menší než 0,02): \[ \begin{aligned} & \frac{Z_{0.05}}{ \sqrt{n}} \left( \frac{a}{1.3236} \right) = 1.321 \\ & \frac{R}{\sqrt{n}} \left( \frac{a}{1.3236} \right) = \text{(další výraz)} \end{aligned} \] Pro \(\frac{I}{\sigma < 3}\) se vypočet hranic intervalů spolehlivosti provedlo podle 2.11. ## Hranice intervalu spolehlivosti Rayleighova rozdělení: Pro zjištění hranic spolehlivosti pro Rayleighovo rozdělení (viz také příklad 2 v oddílu 5) se nejprve podívejte vzorce (2.6) a (2.7), popřípadě (2.9) a (2.10) odhadnouvací veličiny \(\mu\) a \(\sigma\). Pro případ, že \(\frac{I}{\sigma} < 6\) se pak z odhadnutých veličin \(\mu\) a \(\sigma\) následujícím způsobem zjistí hledané hodnoty parametru \(z\) pro přizpůsobeného Rayleighova rozdělení: Z rovnic (1.14) a (1.16) získáme funkci: \[ \frac{d \mu}{d N} = \frac{B^2}{\left( \frac{d \sigma}{d N} \right)} \cdot \frac{d}{dz} \left( e^{-z^2 / 2} \right) \left( v_0 \cdot e^{z} \cdot \left( \int_0^{\infty} e^{-z^2} \, dz \right) \right) \] přičemž \[ v = \frac{r}{d N} \] Pomocí rovnice (1.17) z toho vyplývá funkce: \[ \frac{d \sigma}{d N} = -2 \left( \frac{z}{d}{\sigma - \left( \frac{v^2}{d \sigma} \right)} \right) \] Z rovnic (1.20) a (1.21) vyplývá podmínka: \[ \frac{\mu}{\sigma} = \frac{\pi}{4 - \pi} = 1.9131 \] Image Analysis: ### Comprehensive Examination of the Provided Visual Content #### **Localization and Attribution:** - The provided content consists of a single page with textual and mathematical content. #### **Object Detection and Classification:** - **Image 1**: This image contains several mathematical equations and explanatory text in a structured format. - **Objects Detected:** - Text paragraphs - Mathematical symbols and equations #### **Scene and Activity Analysis:** - **Image 1**: - **Scene Description:** The image displays a page from what appears to be a technical or academic document. The content is written in a structured manner with several paragraphs, equations, and figures. - **Activities:** The main activity involves the presentation of mathematical derivations, approximations, and equations used to describe specific characteristics and intervals in a statistical or scientific context. #### **Text Analysis:** - **Image 1**: - **Detected Text:** - The text is in Czech. - It includes headings like "Hraniční interval spolehlivosti Rayleighova rozdělení" which translates to "Rayleigh Distribution Confidence Interval." - Other notable phrases include "Pro přímé zjištění charakteristik" translating to "For direct determination of characteristics". - **Text Significance:** - The text serves to explain the mathematical derivations and approximations used for determining characteristics in the context of the Rayleigh distribution. #### **Diagram and Chart Analysis:** - **Image 1**: - There are no diagrams or charts to analyze. #### **Product Analysis:** - **Image 1**: - There are no products depicted in this image. #### **Anomaly Detection:** - **Image 1**: - No noticeable anomalies or unusual elements are present. The page appears to be a standard academic or technical document. #### **Color Analysis:** - **Image 1**: - The image is in grayscale. The dominant colors are black (for text and symbols) and white (background). This has a neutral impact and facilitates readability. #### **Perspective and Composition:** - **Image 1**: - **Perspective:** The image is taken from a front-facing view, showing the entire page clearly. - **Composition:** The content is well-organized, with equations and text clearly separated. Headings and subheadings are used to break down the information. #### **Contextual Significance:** - **Image 1**: - This image seems to be a page from a statistical or mathematical academic document. It contributes to the overall message by providing detailed mathematical explanations and derivations pertinent to the document's subject. #### **Metadata Analysis:** - **Image 1**: - There is no accessible metadata to analyze. #### **Graph and Trend Analysis:** - **Image 1**: - No graphs are present in this image. #### **Trend and Interpretation:** - **Image 1**: - The image mostly focuses on providing mathematical formulas and explanations without exhibiting any discernible trends. #### **Tables:** - **Image 1**: - No tables are provided in this image. #### **Ablaufprozesse (Process Flows):** - **Image 1**: - No process flows are depicted. #### **Prozessbeschreibungen (Process Descriptions):** - **Image 1**: - The image describes processes for calculating reliable intervals using Rayleigh distribution, but no step-by-step processes or workflows are visually depicted. #### **Typen Bezeichnung (Type Designations):** - **Image 1**: - The content includes type designations for various mathematical terms and variables in the context of Rayleigh distribution and interval reliability. --- This comprehensive analysis covers the significant aspects of the provided image, focusing on its academic and technical content. #################### File: VW%2010130_CS.pdf Page: 14 Context: # Strana 14 VW 101 30: 2005-02 Hledané hodnoty parametrů Rayleighova rozdělení tak lze za podmínek (2.23) odhadnout pomocí: \[ \sigma_N = \sqrt{ \left( 1 + \left( \frac{\mu}{\sigma} \right)^2 \right) \frac{(1 + \frac{1}{\sqrt{2}})^2}{2} } \; \sigma \; \] (2.24) \[ \hat{z} = \frac{\xi_{2}}{2} + \sigma_N \] (2.25) při čemž \[ \xi_{2} = \text{inverse Funktion von (2.22)} \] Pro případ, že by poměr \(\frac{\mu}{\sigma}\) na základě náhodných odchylek parametrů vzorků byl menší než mezí hodnota 1.9131 z podmínek (2.23), je poměr \(\frac{\mu}{\sigma}\) nastaven na tuto mezí hodnotu, při které vyplývá následující hodnoty parametrů: \[ \hat{z} = 0 \; podle vzorce \; (1.21) \] (2.26) Souvislost mezi hodnotami parametrů \(\sigma_N\) a \(\sigma\) Rayleighova rozdělení a statistických veličin \(\mu\) a \(\sigma\) je graficky znázorněna na obrázku 7, vztaženo k \(\alpha\). ## Obrázek 7 - Relativní poloha parametrů Rayleighova rozdělení v závislosti na relativní poloze | relativní poloha \(\mu/\sigma\) | relativní distribučí parametry | |----------------------------------|----------------------------------| | 1.5 | 0 | | 2 | 1 | | 2.5 | 3 | | 3 | 5 | | 5 | 7 | Image Analysis: 1. **Localization and Attribution:** - **Image 1:** Located at the top section of the page. This image contains mathematical equations and text explanations. - **Image 2:** Located below Image 1. This is a graph titled "Obrázek 7 – Relativní poloha parametrů Rayleighova rozdělení v závislosti na relativní poloze." 2. **Object Detection and Classification:** - **Image 1 Objects:** - Mathematical equations. - Descriptive text. - **Image 2 Objects:** - Graph with axes, scales, data points, and labels. 3. **Text Analysis:** - **Image 1 Text:** - The text includes mathematical formulas and equations related to the calculation of parameters in a statistical distribution (specifically, a Rayleigh distribution). - Descriptions and explanation of these formulas in the Czech language. - **Extracted Equations:** - \[ \hat{\sigma}_N = 1 + \frac{\hat{\mu}}{\hat{\sigma}} \] - \[ \hat{z} = 6_{82}(\hat{\sigma}) + \hat{\sigma}_N \] - \[ \hat{\sigma} = \sqrt{\frac{2}{4 - \pi}} . \hat{\sigma} = 1,526 . \hat{\sigma} \] - **Image 1 Text Content:** - The text explains the derivation and estimation of maximum likelihood parameters and their relationships, referencing specific equations. - **Extracted Passages:** - "Pro případ, že by poměr \(\hat{\mu}/\hat{\sigma}\)..." - "Souvislost mezi hodnotami parametrů... Rayleighova rozdělení a statistických veličin \(\mu\) a \(\sigma\)..." 4. **Diagram and Chart Analysis:** - **Image 2 Graph:** - The x-axis is labeled "relativní poloha μ/σ" (relative position μ/σ). - The y-axis is labeled "relativní distribuční parametr" (relative distribution parameter). - The graph includes two curves: one labeled "Z/σ" and the other "σ_N /σ". - **Axes and Scales:** - X-axis ranges from 1.5 to 6.0. - Y-axis ranges from 0 to 7. - **Key Insights:** - The graph visualizes the relationship between relative positions and distribution parameters in the context of a Rayleigh distribution, showing how parameters evolve with changes in μ/σ. 5. **Graph Numbers (Image 2):** - Data points for "Z/σ": - \( \mu/σ = 1.5 \rightarrow Z/σ \approx 0.5 \) - \( \mu/σ = 2.5 \rightarrow Z/σ \approx 1.0 \) - \( \mu/σ = 3.5 \rightarrow Z/σ \approx 2.7 \) - \( \mu/σ = 4.5 \rightarrow Z/σ \approx 4.5 \) - \( \mu/σ = 5.5 \rightarrow Z/σ \approx 5.8 \) - Data points for "σ_N /σ": - \( \mu/σ = 1.5 \rightarrow σ_N /σ \approx 1.5 \) - \( \mu/σ = 2.5 \rightarrow σ_N /σ \approx 1.8 \) - \( \mu/σ = 3.5 \rightarrow σ_N /σ \approx 2.0 \) - \( \mu/σ = 4.5 \rightarrow σ_N /σ \approx 2.03 \) - \( \mu/σ = 5.5 \rightarrow σ_N /σ \approx 2.1 \) #################### File: VW%2010130_CS.pdf Page: 15 Context: # Pro přizpůsobené Rayleighovo rozdělení Pro přizpůsobené Rayleighovo rozdělení lze pak číselně zjistit hranice intervalů spolehlivosti, jejichž závislost na relativní poloze je znázorněna na obrázku 8. ![Obrázek 8 – Relativní hranice intervalu spolehlivosti Rayleighova rozdělení v závislosti na relativní poloze](path/to/image.png) ## 1. Zjištění charakteristik Pro přímé zjištění charakteristik \( \alpha \) a \( \sigma \) lze pro \( 1.9131 \leq \frac{\mu}{\sigma} < 6 \) s dostatečnou přesností použít také následující aproximaci jako inverzní funkci vztahu (2.22) (chyba vážená na \( c \) je menší než 0.02): \[ \begin{equation} \hat{\sigma}_{\alpha} = 2.1 \left( \frac{ \mu}{\sigma} - 1.9131 \right)^{3.630} + 0.466 \left( \frac{\mu}{\sigma} - 1.9131 \right)^{1.82} \end{equation} \] Navíc může být zjištěn hranice intervalu spolehlivosti pro \( 1.9131 \leq \frac{\mu}{\sigma} < 6 \) provedením přímo pomocí následujících aproximací (chyba vážená na \( c \) je menší než 0.03): \[ \begin{equation} \hat{y}_{0.95} = -1.64 \left( \frac{ \mu }{ \sigma } - 1.9131 \right) + 2.075 \left( \frac{ \mu }{ \sigma } - 1.9131 \right) + 5.5485 \end{equation} \] \[ \begin{equation} \hat{y}_{0.80} = 2.6 \cdot \exp\left( -1.7031 - 0.8 \left( \frac{ \mu }{ \sigma } - 1.9131 \right) \right) - 2.1206 \end{equation} \] Pro \( \mu / \sigma < 6 \) se výpočet oblasti rozpětí provádí podle vzorce (2.11). Image Analysis: 1. **Localization and Attribution:** - The document contains one image positioned centrally on the page. - Numbering the image: Image 1. 2. **Object Detection and Classification:** - Image 1 contains a line graph with axes and multiple plotted lines. 3. **Scene and Activity Analysis:** - The scene depicts a line graph titled "Obrázek 8 – Relativní hranice intervalu spolehlivosti Rayleighova rozdělení v závislosti na relativní poloze" which translates to "Figure 8 – Relative confidence interval boundaries of the Rayleigh distribution in relation to relative position." - The main activity involves analyzing data points on the graph that show the dependency of relative position on the relative confidence interval boundaries of Rayleigh distribution. 4. **Text Analysis:** - Detected text in the image includes headings, descriptions, and annotations on the graph. - The text explains mathematical relationships and provides formulas and numerical approximations relevant to the graph. - Main formulas presented: - Formula (2.27): \[ \hat{ɛ_{a}} \left(\frac{\hat{µ}}{\hat{σ}}\right) = \frac{2.1}{\sqrt{\hat{µ}/\hat{σ}} -1.9131}^{-3.93} + 0.466 \left(\frac{\hat{µ}}{\hat{σ}} - 19131\right)^{1.42} \] - Formula (2.28): \[ \hat{x}_{0.995,} \left(\frac{\hat{µ}}{\hat{σ}}\right) = -1.84 \left(\frac{\hat{µ}}{\hat{σ}} - 19131\right)^{0.82} + 2.075 \left(\frac{\hat{µ}}{\hat{σ}} - 19131\right) + 5.5485 \] \[ \hat{x}_{0.995,} \left(\frac{\hat{µ}}{\hat{σ}}\right) = 2.6 \cdot \exp^{\left(-\frac{\hat{µ}}{\hat{σ}} - 1.703\right) \cdot 0.8} + 1.425 \cdot \left(\frac{\hat{µ}}{\hat{σ}} - 1.9131\right) - 2.1206 \] 5. **Diagram and Chart Analysis:** - The horizontal axis is labeled "relativní poloha μ/σ" (relative position μ/σ), ranging from 1.5 to 6. - The vertical axis is labeled "relativní hranice intervalu spolehlivosti" (relative confidence interval boundaries). - The graph contains two plotted lines representing different data series: \( \hat{x_{0.995,} / σ} \) and \( \hat{x_{0.995,} / μ/σ} \). - The trend shows that as the relative position increases, the relative confidence interval boundaries also change, which can be inferred from the behavior of the plotted lines. 13. **Graph Numbers:** - The specific data points on the graph are not numerically listed in the image, but the graph provides a visual representation of the relationship between relative position and relative confidence interval boundaries. - **Prozessbeschreibungen (Process Descriptions):** - The text describes mathematical procedures for determining the relative confidence interval boundaries based on the characteristics of the Rayleigh distribution. This involves using specific formulas to approximate the results. Overall, the image contributes to the comprehension of the mathematical relationships involved in the analysis of the Rayleigh distribution, offering a visual and analytical approach to understanding confidence interval boundaries concerning relative position. #################### File: VW%2010130_CS.pdf Page: 16 Context: # 3.2.2 Zjištění způsobilosti u nedf initovaných distribučních modelů Pokud nelze vybrané charakteristiky přidat vhodný distribuční model nebo pokud naměřené hodnoty odebrané vzorku neodpovídají předpokládaném distribučním modelu, proveďte se neparemetrický odhad charakteristik způsobilosti metodou rozptylu v následně modifikované formě při zohlednění rozsahu namátkových vzorků.5 (viz také příklad 3 v oddílu 5): ## Charakteristiky způsobilosti pro oboustranně tolerovaný ukazatel: \[ \hat{c}_{m} = \frac{G_{r} - G_{l}}{x_{u} - x_{l}} \tag{2.29} \] \[ \hat{c}_{m} = \min\left(\frac{G_{r} - x_{s_{95}}}{G_{r} - G_{l}}, \frac{x_{s_{95}} - G_{l}}{G_{r} - G_{l}}\right) \tag{2.30} \] ## Charakteristiky způsobilosti pro jednosměrně nahoře tolerovanou charakteristiku a přirozenou dolní mezní hodnotu rovnou nule: \[ \hat{c}_{m} = \frac{x_{0}}{x_{u}} \tag{2.31} \] \[ \hat{c}_{l} = \frac{G_{r} - x_{s_{95}}}{G_{r} - G_{l}} \tag{2.32} \] ## Charakteristika způsobilosti pro jednosměrně dole tolerovanou charakteristiku: \[ \hat{c}_{m} = \frac{x_{s_{05}} - G_{l}}{x_{u} - x_{l}} \tag{2.33} \] * přičemž - \( x_{0} - x_{u} \): odhadované hodnoty horní a dolní hranice intervalu spolehlivosti - \( \hat{x} \): odhadnutá hodnota 50%ního kvantilu ## V případě dílčí hodnoty je \[ x_{s_{05}} = \bar{x} \tag{2.34} \] * přičemž - **Median**, hodnota, která je zprostředná spolehlivosti naměřených hodnot. \[ \hat{x}_{0} = \bar{x} + \frac{R}{2} \tag{2.35} \] * přičemž - \( \bar{x} \) a \( R \) = normální rozdělení ukazatele. Image Analysis: ### Analysis of the Attached Visual Content #### Localization and Attribution: **Single Image:** The provided image appears on a single page, specifically labeled "Strana 16," which is the Czech word for "Page 16". #### Text Analysis: The text appears to be an excerpt from a technical document or manual, and it's written in Czech. The main headings and sections include: 1. **Section 3.2.2:** - Title: "Zjištění způsobilosti u nedefinovaných distribučních modelů" which translates to "Determining capability for undefined distribution models." - This section seems to discuss methods for estimating process capability when measured values or distribution models don’t conform to typical distribution assumptions. 2. **Formulas:** - It contains several formulas for calculating different capability indices: - Formula (2.29): Describes the general index for two-sided tolerances. - Formula (2.30): Modified index considering range and sample. - Formula (2.31) & (2.32): Indices for upper and lower one-sided tolerance characteristics. - Formula (2.33): Another form of index for lower one-sided tolerance. - Various parameters are defined: - \( \hat{X}_{50\%} \): Estimated median value. - \( \overline{X} \): Mean value. - \( k \): Upper and lower confidence interval limits. - \( R \): Range. 3. **Footnote:** - There's a footnote numbered [5] indicating that the similar approach to capability calculation might have been used in previous guidelines or standards. #### Diagram and Chart Analysis: There are no diagrams or charts present on this page. #### Mathematical Content Breakdown: The image includes various mathematical formulas and symbols primarily indicating statistical measures: - **Capability Indices (č.m, č mak, etc.)**: These are statistical metrics used to measure if a process meets specifications. - **Odhad (Estimate)**: Terms related to upper and lower limits of the confidence interval. - **Medián (Median)**: Measure of central tendency. #### Contextual Significance: Based on the title and technical nature of the content, this page likely belongs to a technical document detailing statistical process control (SPC) or quality control methods in manufacturing or production environments. The formulas and their specific indices are significant for engineers or quality control professionals who need to understand and implement statistical methods to ensure manufacturing processes are within acceptable tolerance levels. #### Anomaly Detection: No anomalies are detected in terms of unusual elements or inconsistencies. #### Perspective and Composition: The image was taken from a straightforward, eye-level perspective suitable for documents. The composition follows a clear, structured format typical for technical documents, with headings, formulas, and related explanations. #### Metadata Analysis: No metadata information is available in the image provided. This document seems to be quite technical and assumes the reader has a good understanding of statistical methods and quality control terminology. The detailed mathematical formulas are used to provide precise calculation methods for determining process capabilities in manufacturing or analysis scenarios. #################### File: VW%2010130_CS.pdf Page: 17 Context: \[ x_c = \frac{x_{\text{max}} + x_{\text{min}}}{2} \tag{2.36} \] \[ R = x_{\text{max}} - x_{\text{min}}: \text{rozpětí} \quad x_{\text{max}}, \, x_{\text{min}}: \text{maximální, popř. minimální naměřená hodnota efektivního celkového namátkového vzorku.} \] Opravným faktorem \[ k = \frac{d}{d_n} \tag{2.38} \] je přitom zohledněn efektivní rozsah namátkových vzorků \(n_e\), přičemž: \[ d^*: \text{očekávaná hodnota w rozdělení}^{6} \] Pro některé rozsahy namátkových vzorků \(n_e\) je v tabulce 1 uvedena hodnota \(d_n\). ### Tabulka 1 – Očekávaná hodnota w rozdělení v závislosti na \(n_e\) | \(n_e\) | \(d_n\) | |---------|---------| | 20 | 3,74 | | 25 | 3,93 | | 30 | 4,09 | | 35 | 4,21 | | 40 | 4,32 | | 45 | 4,42 | | 50 | 4,50 | Pro rozsahy namátkových vzorků, které jsou větší než 20, lze zjistit očekávané hodnoty w rozdělení podle následujícího přiblížení vzorce: \[ d_n = \frac{1.748}{\sqrt{(\ln(n_e))}} \tag{2.39} \] V případě rozdělení četnosti setříděných naměřených hodnot je \[ \bar{x}^* : \bar{x}^* \text{rovno horní popř. dolní mezi nejnižší, popř. nejspodnější obsazené třídy} \] \[ \bar{x}_{k} = x_{k} + \frac{n_{k} - A_{k}}{a_{k}} \cdot \Delta x \quad \text{pro } A_{k} < n_{k} \leq A_{k} + a_{k} \tag{2.40} \] přičemž \(\bar{x}^*:\) spodní hranice k-té třídy \\ \(\Delta x:\) šířka třídy \\ \(a_k:\) absolutní četnost naměřených hodnot v k-té třídě \\ \(A_{k}:\) absolutní distribuční funkce naměřených hodnot až po spodní hranici k-té třídy Image Analysis: ### Localization and Attribution - **Image 1**: This is the only image on the page. ### Text Analysis - **Image 1** contains mathematical equations, text, and a table: **Text Content:** - Title: "Tabulka 1 - Očekávaná hodnota v rozdělení v závislosti na ne" - Columns & Rows Content: - `ne` values: 20, 25, 30, 35, 40, 45, 50 - `d` values: 3.74, 3.93, 4.09, 4.21, 4.32, 4.42, 4.50 - Equations: Several equations are shown, such as: - \( x_c = \frac{x_{\text{max}} + x_{\text{min}}}{2} \) - Equation 2.36 - \( R = x_{\text{max}} - x_{\text{min}}: \) rozsah: maximální, popř. minimální naměřená hodnota efektivního celkového namátkového vzorku. - Equation 2.37 - An equation defining `k`: - \( k = \frac{d_e}{n_{n}} \) - Equation 2.38 - \( d_e = 1.748 \cdot (ln(n_e))^{0.993} \) - Equation 2.39 - Additional descriptions in Czech following these equations, likely explaining terms and application in sampling distribution. ### Diagram and Chart Analysis - **Table 1 - Očekávaná hodnota v rozdělení v závislosti na ne**: - A table showing the relationship between `ne` (likely sample size) and `d` (a distribution parameter or expected value). ### Anomaly Detection - No visible anomalies in the image. ### Color Analysis - The image is predominantly black-and-white, indicative of a document or textbook page. There are no other colors used. ### Perspective and Composition - The image is a straight-on scan or capture of a document page with text and table components properly aligned and centered. ### Contextual Significance - Based on the mathematical equations and detailed table, it is evident this image is part of a technical or academic document, likely focusing on statistical analysis or sampling methods. ### Graph and Trend Analysis - The table shows a trend where the value of `d` increases with the increase of `ne`, describing the expected relationship in the sample size and a parameter of distribution. ### Graph Numbers - From the table data: - \( n_e \) values: 20, 25, 30, 35, 40, 45, 50 - \( d \) values: 3.74, 3.93, 4.09, 4.21, 4.32, 4.42, 4.50 #################### File: VW%2010130_CS.pdf Page: 18 Context: # 3.3 Mezni hodnoty pro způsobilost stroje Pro dosažení způsobilosti stroje pro sledovanou charakteristiku je nutno splnit následující požadavky z hlediska stanovených mezních hodnot \( C_{mk}^{Gen.} \) a \( C_{mk}^{Gen.} \): \[ \bar{c}_{mk}^{Gen.} \geq c_{mk}^{Gen.} \tag{3.1} \] \[ \bar{c}_{mk}^{Gen.} \geq C_{mk}^{Gen.} \tag{3.2} \] v efektivním rozsahu námětkových vzorků \( n \geq 50 \). Pokud není dohody nutno nic jiného, platí následující mezni hodnoty způsobilosti: \[ C_{mk}^{Gen.} = 2,0 \] \[ C_{mk}^{Gen.} = 1,67 \] V případě, kdy je za účelných nákladů možná pouze jedna prověrka s menším efektivním rozsahem námětkových vzorků než 50, je nutno následujícím způsobem přihlédnout k vyšší nejistotě a to vyplyvajících zjištěných charakteristik způsobilosti pomocí příslušně zvýšených mezních hodnot. Zjištění mezních hodnot pro efektivní rozsahy námětkových vzorků menší než 50 je přitom vztaženo na mezní hodnoty, které lze z požadavku (3.1) nebo (3.2) pro prověřování základní soubor dodržet z 95% pravděpodobností (dolní meze oblasti spolehlivosti). Ty vyplývají ze předpokladů normálně rozděleného základního souboru z horní mezí oblasti spolehlivosti směrodatné odchylky: \[ \sigma = \frac{49}{\sqrt{n}} \tag{3.3} \] a statistické podílové oblasti pro výrobní rozptyl: \[ X_{89,965} = \mu + t_{(1 - \alpha/2, n - 2)} \cdot \sigma \left(1 + \frac{1}{n}\right)^{1/2} \tag{3.4} \] \[ U_{89,965} = 3.0: \quad \text{kvalitní standardizované normální rozdělení} \] \[ \chi^2_{(n-1)} = 33.9: \quad \text{kvalitní rozdělení chi kvadrát při stupni volnosti } f = 49 \text{ (viz také 1)} \] Image Analysis: ### Image Analysis #### 1. Localization and Attribution: - **Image 1**: - The entire page is a single image. #### 2. Object Detection and Classification: - Text: This is the primary element on the page. - Mathematical Equations: Several equations and formulas are listed. - Diagrams: There are diagrammatic representations, likely related to statistical or mathematical calculations. #### 3. Scene and Activity Analysis: - The image presents a technical document with text explaining processes and mathematical requirements. - The key activities include presenting and calculating certain tolerance indices for machinery, specifying effective sample size, and the boundary regions for confidence intervals. #### 4. Text Analysis: - **Header Text**: - "Strana 18" - "VW 101 30: 2005-02" - This indicates the page number and a standard code or document identifier. - **Section Header**: - "3.3 Mezní hodnoty pro způsobilost stroje" - This means "3.3 Limiting values for machine capability" in Czech. - **Body Text**: A detailed discussion on calculating limiting values for machine capability, necessary sample sizes, specific formulas, and statistical bounds. - **Equations and Formulas**: - Several mathematical representations, such as C_m, C_mk, and related statistical variables. #### 5. Diagram and Chart Analysis: - **Diagrams**: Present mathematical formulations - likely for normalizing effective ranges and determining probability limits. These diagrams support the equations presented in the text. #### 6. Product Analysis: - **Not Applicable**: No products are depicted. #### 7. Anomaly Detection: - **None Identified**: The document seems professionally structured with no unusual elements. #### 8. Color Analysis: - The document is primarily black and white, typical of formal technical documents to ensure clear readability. #### 9. Perspective and Composition: - **Perspective**: Top-down view of a single-page document. - **Composition**: The text is segmented by headings and subheadings. Equations and diagrams are integrated within the sections for clarity. #### 10. Contextual Significance: - This image is part of a larger technical document or engineering manual, providing specific standards, calculations, and tolerances. #### 11. Metadata Analysis: - **Not Available**: No metadata is embedded in the image. #### 12. Graph and Trend Analysis: - Equations suggest statistical norms and tolerance ranges, but no trend analysis is required as the focus is on static formulas. #### 13. Graph Numbers: - **Extracted Equation Elements**: - `C_m, C_m_gen` - `C_mk, C_mk_gen` - `49` - `3.0` - `33.9` - `49` #### Additional Aspects: - **Ablaufprozesse (Process Flows)** and **Prozessbeschreibungen (Process Descriptions)**: - The process describes the calculation of machine capability indices and bounds. - **Typen Bezeichnung (Type Designations)**: - Designations like `C_m` and `C_mk` are types of capability indices. - **Trend and Interpretation**: - The focus is on calculating tolerance and capability thresholds to ensure machine accuracy and reliability. - **Tables**: - No tables are identified in this specific image. In summary, this document page is primarily instructional, detailing the statistical methods and calculations necessary for determining machine capability in an engineering context. The detailed equations and sample size requirements highlight the precision needed for industrial standards. #################### File: VW%2010130_CS.pdf Page: 19 Context: # Transformace a dosazením do vyhodnocovacích vzorců (2.1) a (2.2) z toho vyplývá mezě způsobilosti pro základní soubor \[ c_{m} \geq \frac{2 \times 5.26}{49} \cdot 0.832 \] (3.5) \[ c_{mk} \geq \frac{1}{1 + \frac{1}{100}} \cdot \frac{1 \times 5.26}{49} \cdot 0.824 \] (3.6) Z toho vyplývá pro efektivní rozsahy namátkových vzorků \(n_k < 50\) následující přizpůsobené hodnoty mezi způsobilosti: \[ \hat{c}_{m} \geq c_{m, \text{G}rnez} \cdot 0.832 \cdot \sqrt{\frac{1}{2 \times n_k}} \cdot \left(\frac{f}{\sqrt{2}} \right) \] (3.7) \[ \hat{c}_{mk} \geq c_{mk, \text{G}rnez} \cdot 0.824 \cdot \left(1 + \frac{1}{2 \cdot n_k}\right) \cdot \sqrt{f} \] (3.8) se stupněm volnosti \[ f = n_k - 1 \] (3.9) ## Příklad Při stanovených mezích způsobilosti \(c_{m, \text{G}rnez} = 2.0\), \(c_{mk, \text{G}rnez} = 1.67\) a efektivním rozsahu namátkových vzorků \(n_k = 20\) vyplývá podle vzorců (3.7) až (3.9) následující přizpůsobené mezní hodnoty pro oboustranně tolerovanou charakteristiku: \[ \hat{c}_{m} \geq 2.0 \cdot 0.832 \cdot \sqrt{\frac{20}{10.1}} = 2.28 \] \[ \hat{c}_{mk} \geq 1.67 \cdot 0.824 \cdot \left(1 + \frac{1}{2 \cdot 20}\right) \cdot \sqrt{\frac{20}{10.1}} = 1.93 \] Image Analysis: Here is the comprehensive analysis based on the provided image: 1. **Localization and Attribution:** - There is only one image on the entire page, hence it is identified as **Image 1**. 4. **Text Analysis:** - The image contains text in the Czech language, which outlines formulas and mathematical explanations. - The header reads: "Strana 19 VW 101 30: 2005-02". - The main content contains formulas and calculations concerning "meze způsobilosti pro základní soubor" which translates to "limits of capability for the basic set". - Key formulas include: - \( c_{m} \geq c_{m_{Grenze}} \cdot \sqrt{\frac{2x \cdot r}{49}} = 0.832 \cdot c_{m_{Grenze}} \) [Formula 3.5] - \( c_{m_{k}} \geq c_{m_{k_{Grenze}}} \cdot \sqrt{\frac{1}{1 + \frac{1}{100}}} = 0.824 \cdot c_{m_{k_{Grenze}}} \) [Formula 3.6] - There is an explanation following these formulas indicating that this is applicable when the number of random samples \( n_{k} < 50 \). - Example calculations provided with specific values: - \( c_{m} \geq 2.0 \cdot 0.832 \cdot \sqrt{\frac{20 - 1}{10.1}} = 2.28 \) - \( c_{m_{k}} \geq 1.67 \cdot 0.824 \cdot \left( 1 + \frac{1}{2 \cdot 20} \right) \cdot \sqrt{\frac{20 - 1}{10.1}} = 1.93 \) - There is a footer note explaining that the adjusted capability limits are used for cross-checking and stand as a compromise method due to a lack of more sophisticated procedures in practice for samples less than 50. 5. **Diagram and Chart Analysis:** - The image does not contain any diagrams or charts. 8. **Color Analysis:** - The document is primarily black and white. The absence of color emphasizes the text and mathematical formulas, providing clear readability for technical content. 9. **Perspective and Composition:** - The image is taken from a straight-on perspective, likely a scan or direct capture of a document page. The text and formulas are centered and aligned to present a clear and structured format. 10. **Contextual Significance:** - The document appears to be an excerpt from a technical manual or academic paper, likely related to statistical methods or quality control based on the context of the formulas and calculations provided. - It contributes to explaining specific statistical parameters and their practical applications in determining capability limits for smaller sample sizes. **Additional Aspects:** - **Ablaufprozesse (Process Flows) and Prozessbeschreibungen (Process Descriptions):** - The document does not depict any process flows or descriptions. - **Typen Bezeichnung (Type Designations):** - Types or categories of proficiency limits and sample sizes (e.g., "základní soubor" for the basic set, "efektivním" for effective range) are identified and described within the formulas. - **Trend and Interpretation:** - The formulas and examples illustrate the trend of adjusting capability limits when dealing with smaller sample sizes to ensure reliable quality control measures. This comprehensive examination of the provided image covers all visual and textual aspects presented and their implications within a technical or academic context. #################### File: VW%2010130_CS.pdf Page: 20 Context: # 3.4 Statistické testy Náměrné hodnoty prozkoumávat schopnost stroje zpravidla nesmí vykazovat: - nečekaně velké odchylky jednotlivě naměřených hodnot (odlišné hodnoty) oproti rozptylu ostatních hodnot, - signifikantní změny polohy během obou vzorků a - signifikantní změnu od očekávaného distribučního modelu. V opakovaném případě je nutno počítat s dodatečnými systémovými vlivy na výrobu. Pro toto chování by pak měly být známy příčiny a měly by být akceptovatelné jejich účinky, aby byl splněn předpoklad bezpečného výrobního procesu. Pro provádění výše uvedených kritérií je proto nutno jít prozkoumávat schopnost stroje použít podklady statistické teorie. Protože tyto testy jsou podrobně popsány v normách nebo doporučeních druhů statistické literatury, jsou zde uvedeny pouze pomoci odkazů: V rámci prověřování schopnosti stroje je nutno provádět následující testy: 1. **Testy odchylek hodnot pomocí testů nezávislých na rozdělení podle Hampela modifikované formě (viz VW 10133)** - **Testy změny polohy** výroby pomocí neparametrického testu podle Swed-Eisenharda (viz [1]) - **Test odchylek od normálního rozdělení** podle Epps-Pullev (viz ISO 5479) - **Test odchylek od libovolně stanoveného distribučního modelu** pomocí testu chi kvadrát (viz [1]) Statistické testy podle následujícího schématu: - formulace nulové hypotezy \( H_0 \) a alternativní hypotezy \( H_a \), např. - H1: základní soubor naměřených hodnot sledovaného znaku má normální rozdělení - H1: základní soubor naměřených hodnot sledovaného znaku nemá normální rozdělení - Stanovení pravděpodobnosti vyjádření \( 1 - \alpha \) nebo hladiny významnosti α - Formulace vzorce pro zkušební veličinu - Výpočet zkušební hodnoty \( h \) podle namátkových vzorků podle vzorce pro zkušební veličinu - Zjištění prahové hodnoty testovacích rozdělení ## Porovnání Je nutno dbát na to, že u statistického testu s uvedenou vycházející pravděpodobností je přípustné prokázat pouze rozptyl nulovou hypotézou, např. že existuje signifikantní odchylka naměřených hodnot od normálně rozděleného základního souboru. Pokud z výsledků testu vyplývá rozpor s nulovou hypotézou, pak to není potvrzením platnosti nulové hypotézy. Proto v případě nelze s uvedeným spolehlivostí např. prokázat, že existuje zakladní soubor s normálním rozdělením. Pak se vytvořte analogicky k právnímu principu, v případě spojení normálně rozděleného souboru jako pro předpoklad nulové hypotézy. Hladina významnosti se uvažuje jako riziko, že se na základě testu zamítne nulová hypotéza, ačkoli je správná (α-riziko). Pro hladinu významnosti vždy lze jen jednoduše stanovit libovolné menší hodnoty, proto že tím pak roste riziko neobjevení skutečně odchylek od normálního rozdělení (β riziko). Image Analysis: ### Text Analysis: #### Detected Text: 1. **Header Information:** - "Strana 20" - "VW 101 30: 2005-02" 2. **Section Title:** - "3.4 Statistické testy" (Statistical tests) 3. **Content:** - The main text discusses statistical tests used to validate the quality and reliability of machinery during production. The text details methods to check significant deviations in measured values and significant changes in anticipated distribution models. - Emphasis is placed on the need to avoid systematic influences during checks to ensure the impact is valid and meets safety standards. #### Subtopics and Bullet Points: - **Primary Methods:** - Tests for significant deviations using non-parametric Ronald Hampel's test. - Tests for change points using the Swed-Eisenhart method. - Tests for normal distribution deviation using Epps-Pulley method. - Test using chi-squared for any arbitrary distribution model. - **General Schema for Statistical Tests:** - Formulation of null hypothesis (H0) and alternative hypothesis (Ha). - Calculation based on measured values assuming normal distribution. - Presentation of probability significance from 1 - α. - Formulation of test statistic formulas. - Calculation of threshold values for test statistics. - Determining threshold values for test distributions. - Comparing test indicators with threshold values to make decisions regarding null hypotheses. - **Significance and Decision Making:** - Determining when there is a significant deviation or a match with an alternative hypothesis. - Distinguishing true and false deviations by considering significant results against accepted norms. #### Contextual Significance: - This text is likely part of a technical or scientific document, particularly dealing with quality control in manufacturing, and highlights various statistical methods to ensure the reliability of production machinery. The thorough explanation of the tests and decision-making process indicates a focus on precision and compliance with certain standards. ### Metadata Analysis: - **Page Number:** - 20 (This suggests that the document is part of a larger series, likely a standard or guideline manual.) - **Document Code:** - VW 101 30: 2005-02 (This could denote a standard document/specification used by Volkswagen or pertaining to a specific technical standard.) ### Prozessbeschreibungen (Process Descriptions): - **Processes:** - The processes described involve systematic testing for deviations in machinery performance during production. These tests need to objectively and accurately indicate whether the deviations are within acceptable bounds to ensure safe and reliable manufacturing outputs. ### Trend and Interpretation: - **Significance:** - The emphasis on statistical validity and the detailed method descriptions suggest that maintaining high-quality standards in manufacturing is crucial. The use of various statistical tests ensures a comprehensive approach towards validating machinery performance, highlighting a commitment to quality and safety. This analysis considers the various components of the document and offers insights into its purpose and significance within a manufacturing and quality assurance context. #################### File: VW%2010130_CS.pdf Page: 21 Context: # 4 Provádění prověřování způsobilosti stroje Provádění prověřování způsobilosti stroje (MFU) je nutno provádět podle procesu znázorněného na obrázcích 9 až 11. ## 4.1 Použití zkušebních prostředků ## 4.2 Odběr namátkových vzorků ### Podmínky pro MFU splněny - **ano**: - 4.4 Vyhodnocování dat - 4.5 Dokumentace - 4.6 Posouzení výsledků - **ano**: Opačování vyhodnocení - **ne**: Stroj způsobilý - **ano**: - 4.8 Nakládání s nezpůsobilými stroji - **ne**: Proveditelná optimalizace stroje - **ne**: 4.3 Zvláštní pravidla pro omezenou MFU ## 4.7 Optimalizace stroje Konec ![Obrázek 9 – Průběh prověrky způsobilosti stroje](path-to-image) Image Analysis: ### Comprehensive Examination of the Visual Content #### Localization and Attribution - **Image Number**: Image 1 - This is the only image on the page. #### Object Detection and Classification - **Objects Detected**: - Rectangular boxes with text (flowchart components) - Various arrows connecting the boxes (indicating flow direction) #### Scene and Activity Analysis - **Scene Description**: - The image depicts a flowchart related to the machine suitability test process ("Provádění prověřování způsobilosti stroje"). - **Activities Taking Place**: - The flowchart outlines a step-by-step process starting from initialization (Start) to various decision points and actions until the completion (Konec) of the machine suitability test. #### Text Analysis - **Text Extracted**: - "Strana 21" - "VW 101 30: 2005-02" - "4 Provádění prověřování způsobilosti stroje" - "Provádění prověřování způsobilosti stroje (MFU) je nutno provádět podle procesu znázorněného na obrázcích 9 až 11." - "Obrázek 9 - Průběh prověrky způsobilosti stroje" - Start - 4.1 Použití zkušebních prostředků - 4.2 Odběr namátkových vzorků - Podmínky pro MFU splněny - ano - ne - 4.3 Zvláštní pravidla pro omezenou MFU - 4.4 Vyhodnocování dat - 4.5 Dokumentace - 4.6 Posouzení výsledků - Opakování vyhodnocení - ano - ne - Stroj způsobilý - ano - ne - 4.7 Optimalizace stroje - ano - Proveditelná optimalizace stroje - ne - 4.8 Nakládání s nezpůsobilými stroji - ne - Konec - **Text Significance**: - The text describes a documented process in Czech for conducting machine suitability tests (MFU - Machine Fitness Unit). It specifies steps and decision points for evaluating whether a machine is fit for use and any corrective actions required. #### Diagram and Chart Analysis - **Diagram Type**: - Flowchart - **Key Insights**: - The chart begins with "Start" and goes through steps such as using testing equipment, sampling random samples, evaluating conditions, data evaluation, documentation, and result assessment. - Conditional branches determine if certain criteria (e.g., suitability conditions, optimization feasibility) are met, directing the flow to different paths and actions (e.g., repeating assessments, handling unsuitable machines). #### Process Descriptions (Prozessbeschreibungen) - **Process Flow**: - The process flow involves several stages: 1. **Using testing tools (4.1)** 2. **Sampling random samples (4.2)** - If conditions are met (yes/no decision) 3. **Special rules for limited MFU if conditions are not met (4.3)** 4. **Data evaluation (4.4)** 5. **Documentation (4.5)** 6. **Result assessment (4.6)** - If the assessment needs to be repeated (yes/no decision) - If the machine is suitable (yes/no decision) 7. **Machine optimization if it is not suitable (4.7)** - Feasibility of optimization (yes/no decision) 8. **Disposition of unsuitable machines if optimization is not feasible (4.8)** 9. **End of process ("Konec")** #### Color Analysis - **Color Composition**: - The flowchart is in black and white, which ensures clear readability and highlights the process and decision points efficiently without the distraction of colors. #### Perspective and Composition - **Perspective**: - The flowchart is presented from a straightforward, top-down perspective suitable for procedural diagrams. - **Composition**: - The flowchart has a logical and orderly layout, with steps arranged sequentially and decision points branching appropriately, making it easy to follow. #### Contextual Significance - **Contribution to Overall Message**: - The diagram plays a crucial role in conveying a standardized procedure for assessing machine suitability within a broader context, likely a quality control or process management document. #### Trend and Interpretation - **Trend and Insights**: - The process demonstrates a rigorous quality assurance trend, emphasizing systematic evaluations, documentation, and decision-making criteria to ensure only suitable machines are in operation. #### Tables - Not applicable in this image. ### Conclusion The visual content provided is a detailed flowchart outlining the process of machine suitability testing (MFU) in Czech language. It offers a step-by-step, decision-driven framework ensuring meticulous assessments, documentation, and necessary actions to maintain machine efficacy and adherence to standards. The orderly and straightforward depiction ensures clarity and ease of implementation in practical scenarios. #################### File: VW%2010130_CS.pdf Page: 22 Context: # 4.4 Vyhodnocování dat ## 4.4.1 Výběr očekávaného distribučního modelu ## 4.4.2 Test na odlišné hodnoty Existují odlišné hodnoty? - **ano** → 4.4.3 Vyjmout odlišné hodnoty z výpočtu statistických ukazatelů - **ne** → ## 4.4.4 Test změny polohy výrobky ## 4.4.5 Test odchylek od stanoveného distribučního modelu Odchylka od distribučního modelu? - **ano** → 4.4.8 Neparametrické vyhodnocení - **ne** → - Normální rozdělení? - **ano** → 4.4.6 Vyhodnocení podle normálního rozdělení - **ne** → 4.4.7 Vyhodnocení podle stanoveného modelu Pokračování v bodě 4 **Obrázek 10 – Průběh vyhodnocování dat** Image Analysis: ### Comprehensive Examination of the Attached Visual Content **Image Identification:** - **Image Number:** 1 - **Description:** A process flowchart related to data evaluation as indicated by the text “Průběh vyhodnocování dat.” ### Analysis: #### 1. **Localization and Attribution:** - **Position:** Only one image is present in the document. - **Designation:** Image 1 #### 2. **Object Detection and Classification:** - **Objects Identified:** - Multiple geometric shapes including ovals and rectangles. - Connecting arrows. - Text inside the shapes. - **Classification:** - **Ovals**: Indicate the start and continuation points of the process. - **Rectangles**: Represent various steps or actions. - **Diamonds**: Indicate decision points in the process. #### 4. **Text Analysis:** - **Extracted Text:** - "4.4 Vyhodnocování dat" - "4.4.1 Výběr očekávaného distribučního modelu" - "4.4.2 Test na odlehlé hodnoty" - "Existují odlehlé hodnoty" - "4.4.3 Vyjmout odlehlé hodnoty z výpočtu statistických ukazatelů" - "4.4.4 Test změny polohy výrobě" - "4.4.5 Test odchylky od stanoveného distribučního modelu" - "Odchylka od distribučního modelu" - "Normální rozdělení" - "4.4.7 Vyhodnocení podle stanoveného modelu" - "4.4.8 Neparametrické vyhodnocení" - "4.4.6 Vyhodnocení podle normálního rozdělení" - "Pokračování v bodě 4" - "Strana 22" - "VW 101 30: 2005-02" - "Obrázek 10 – Průběh vyhodnocování dat" - **Contextual Significance:** The text provides a structured overview of data evaluation procedures, likely from a procedural or technical guide. #### 5. **Diagram and Chart Analysis:** - **Description:** - **Title:** "Průběh vyhodnocování dat" - **Structure:** The diagram is a flowchart outlining a decision-making process for evaluating data. - **Flow:** Begins with “4.4 Vyhodnocování dat” and follows through various decision points with conditional operations. - **Key Components:** - **Start:** "4.4 Vyhodnocování dat" - **Steps:** Sequential steps are numbered from 4.4.1 to 4.4.8. - **Decisions:** Conditional branches are based on whether outliers exist, deviations from the model, and normalization of distribution. - **End:** Concludes with "Pokračování v bodě 4". - **Key Insights:** - The chart systematically handles data evaluation, starting with model selection, testing for outliers, and evaluating deviations from the expected model. - It also incorporates decision points for non-parametric evaluation and consideration of normal distribution. ### Additional Analysis: #### **Ablaufprozesse (Process Flows):** - **Description:** The flowchart depicts a detailed process flow for evaluating data. It highlights the decision points and clearly distinguishes the steps to be taken based on the evaluation results. #### **Prozessbeschreibungen (Process Descriptions):** - **Detail:** Each step is described, ensuring a thorough understanding of the stages involved in data evaluation. It starts with model selection and progresses through testing stages, decision-making regarding outliers and model deviations, and appropriate evaluation methods based on the statistical analysis. #### **Typen Bezeichnung (Type Designations):** - **Identification:** The types or categories are designated by the step numbers (e.g., 4.4.1 for model selection, 4.4.2 for testing outliers). ### Summary: This flowchart, designated as "Obrázek 10 – Průběh vyhodnocování dat" on "Strana 22", outlines a comprehensive data evaluation process, demonstrating the stages and decision points essential for statistical data analysis. Structured with clear conditional operations and procedural steps, it’s an effective tool for ensuring systematic and consistent data evaluation in line with technical guidelines. #################### File: VW%2010130_CS.pdf Page: 23 Context: # 4.6 Posouzení výsledků ![Obrázek 11 – Průběh posouzení výsledku](link_to_image) 1. **Existují odlišné hodnoty?** - **ano**: Pokračovat k bodu 2. - **ne**: Konec. 2. **Změna polohy výrobky?** - **ano**: Pokračovat k bodu 3. - **ne**: Konec. 3. **Odchylka od distribučního modelu?** - **ano**: Pokračovat k bodu 4. - **ne**: Možný jiný distribuční model. - **ano**: Opakování vyhodnocení pokračování v bodě 4. - **ano**: Známá příčina a akceptovatelný vliv. - **ano**: Stroj způsobilý. Pokračování v bodě 4. - **ne**: Stroj nezpůsobilý. Pokračování v bodě 4. - **ne**: Konec. 4. **Charakteristiky způsobilosti menší než mezní hodnoty?** - **ano**: Stroj způsobilý. Pokračování v bodě 4. - **ne**: Stroj nezpůsobilý. Pokračování v bodě 4. Image Analysis: **Analysis of Image 1: Flowchart** 1. **Localization and Attribution:** - This is a single image located centrally on the page. - Labeled as Image 1. 2. **Object Detection and Classification:** - Objects: Contains various geometric shapes including ovals, diamonds, rectangles, and connectors (arrows). - Categories: Flowchart diagram elements. 3. **Text Analysis:** - Detected text: - "4.6 Posouzeni vysledku" - "Existují odlehlé hodnoty" - "Odlehlé hodnoty v důsledku chybných měření" - "Změna polohy výroby" - "Odchylka od distribučního modelu" - "Možný jiný distribuční model" - "Opakování vyhodnocení, pokračování v bodě 4" - "Známá příčina a akceptovatelný vliv" - "Charakteristiky způsobilosti menší než mezní hodnoty" - "Stroj způsobilý, Pokračování v bodě 4" - "Stroj nezpůsobilý, Pokračování v bodě 4" - "Obrázek 11 – Průběh posouzení výsledku" - Analysis of text: - Title "4.6 Posouzeni vysledku" translates to "4.6 Outcome Assessment". - Diagram evaluates different steps in outcome assessment with decision paths indicated by "ano" (yes) and "ne" (no). - The text in diagrams describes steps and conditions for deciding on manufacturing and distribution impact, including potential errors and known causes. - The final outcomes are either "Stroj způsobilý" (Machine suitable) or "Stroj nezpůsobilý" (Machine unsuitable). 4. **Diagram and Chart Analysis:** - Diagram Type: Flowchart showing decision points and flow of actions. - The flowchart begins with the assessment of the results "4.6 Posouzeni vysledku". - It queries whether there are outlier values which, if due to erroneous measurements, suggests re-evaluation. - If not erroneous, it examines changes in production positions, deviations from the distribution model, possible use of other distribution models, and known acceptable influences. - At various decision points, the chart concludes whether the machine continues to be suitable or unsuitable, directing to procedure in "bodě 4" when necessary. 5. **Ablaufprozesse (Process Flows):** - The flowchart clearly details the process of outcome assessment with conditional steps resulting in suitability evaluation of machines. - It captures a methodical approach to decision-making, considering multiple variables and contingencies in manufacturing processes. 6. **Prozessbeschreibungen (Process Descriptions):** - Describes assessment steps starting from checking outliers, evaluating model deviations, potential errors, and known influences. - Each step involves clear conditional checks leading to a final verdict on machine suitability. #################### File: VW%2010130_CS.pdf Page: 24 Context: # 4.1 Použití zkušebních prostředků Pro MFU je nutno používat pouze zkušební prostředky, které byl pro plánovaný zkušební proces schválen příslušným místem. ## 4.2 Odběr namátkových vzorků MFU se vztahuje pouze na výrobní charakteristiky nebo parametr vzorku. Zpravidla je nutno pro vyhodnocení zjistit jednotlivé naměřené hodnoty vzorků. V případě ručně zaznamenávaných naměřených hodnot ve formě čárek v rozdělení tříd oblastí hodnocení (statistickou četností) je nutno také evidovat rozdělení četností daných naměřených hodnot9. Aby bylo možno pi MFU poskytnout pouze v této stroj, je nutno při výrobě vzorků dodržet následující podmínky: - Při provádění musí být zajištěna jednotná **šarže polotovaru** a jednotná příprava (dodavatel, materiál). Během MFU musí stroj nebo zařízení obsluhovat vždy stejný pracovník. - **Kvalita přípravy** hodnocených značek musí odpovídat požadovaným výrobním předpisům. - Počet vybraných dílů (rozsah namátkových vzorků) by měl zpravidla činit 50 ks. Pokud je tento rozsah namátkových vzorků z technických nebo ekonomických důvodů obtížně realizovatelný, je přípustný i menší. Pak je nutno dodržet odpovídajícím způsobem vyšší měrný rozsah (hodnoty podle tabulky 3 nebo var. (3.7) a (3.8). Efektivní rozsah namátkových vzorků (např. bez odlehlých hodnot) musí činit minimálně 20. - Dílů je nutno vyrábět bezprostředně po sobě a číslo podávat výrobě. Na každém dílu je nutno provést všechny stanovené záznamy. - MFU se smí provádět pouze u stroje zahřátého na provozní teplotu. Pojem "zahřátí na provozní teplotu" je nutno definovat pro každý případ použití zvlášť. - Je nutno zajistit, aby se nenačítala MFU záznamy pro sériových podmínek požadovaných pro daný stroj (tzn. z období tahu a parametry nastavené přímo pro sériovou výrobu). V závislosti na projektu je nutno stanovit pravidla, aby bylo na začátku MFU zaručeno, že je např. **zaparované žádánce**, a že konec doby životnosti nebyl nařízen v rámci MFU. - Během MFU se nesmí provádět **výměna zařízení**, různí seřizovací zařízení nebo jiné změny parametrů strojů. Vyměníte-li automatické korektury návrdu pomocí integrovaného nebo trvalého kontrolního měření. - Při poruchách vzniklých Během MFU, které ovlivňují prověřovací znak, je nutno zahájit MFU znovu. - Před výrobní zkouškou musí být zahájení prověřovací metody oznámeno a doslohnmých metod navíc uvedená a odložená. - Při výrobě rozměrových dílů (rozdílná čísla dílů, např. cejlové hřídele / litinové hřídele) na žádném MFU, které mohou vykazovat různé charakteristiky, je nutno MFU prověřit způsobem veškeré důkazy. Image Analysis: ### Text Analysis: 1. **Localization and Attribution:** - **Image Location and Positioning**: The image is a single page from what appears to be a document or a manual. It contains a structured text layout with numbered sections and bullet points. 2. **Text Content and Analysis**: - The page is in Czech and addresses protocols and processes for using test resources and taking samples in a manufacturing context. - **4.1 Use of Test Resources**: States that test resources should only be used for the intended approval process with the designated authority. - **4.2 Sampling**: Details about sampling processes are provided: - **Production Sample Characteristics**: Emphasizes the need to measure parameters of production samples properly. - **Uniform Batch Preparation**: Highlights the need for uniform batch preparation and proper handling by designated personnel. - **Preparation Quality**: Draws attention to the requirement that preparation quality characteristics should meet production standards. - **Sample Quantity**: Mentions the typical quantity of samples (usually 50 pieces), and exceptions for technical or economic reasons, permitting smaller quantities as long as they meet certain criteria. - **Direct Production and Marking**: Stipulates the direct preparation and marking of samples. - **Operational Testing**: Notes the importance of testing samples at operational temperature. - **Production Conditions**: Details that samples should be produced under specific conditions analogous to serial manufacturing. - **Tools and Equipment**: Mentions the restricted change of tools and parts, calling out exceptions such as integrated monitoring systems. - **Testing and Methodology**: Elaborates on the test methods and their required approval before commencing testing. - **Unique Characteristics**: Speaks to the need for diverse procedures for different characteristics of parts (e.g., different diameters or materials). 3. **Process Descriptions**: - The document provides a detailed description of protocols related to the manufacturing sampling process, stating explicit steps and conditions necessary for testing and sample preparation. 4. **Typen Bezeichnung (Type Designations)**: - The text makes specific mentions of different types of components and processes e.g., 'bare, semi-finished, or finished batch', indicating the varying types of samples and their preparatory needs. 5. **Prozessbeschreibungen (Process Descriptions)**: - Describes the process steps for ensuring quality in test samples: - Ensuring uniform sample batches. - Regularly measuring and assessing samples. - Handling and operational protocols for sample testing. - Adjustments for component variability. ### Conclusion: This document page from a manual outlines explicit manufacturing protocols for testing and sample preparation, emphasizing standardization, quality checks, and procedural adherence. It is meant to guide operators and quality assurance teams in maintaining adherence to manufacturing standards and ensuring reliable sample quality for testing purposes. #################### File: VW%2010130_CS.pdf Page: 25 Context: # 4.3 Zvláštní pravidla pro omezené MFU Pokud nelze pro odběr vzorku zcela splnit podmínky uvedené v bodě 4.2, pak ze o odváděných případech pro omezení MFU, pro které je nutno mezi dodavatelem a odběratelem sjednat zvláštní pravidla a zadokumentovat je pod poznámkou „Omezení MFU“. # 4.4 Vyhodnocení dat ## 4.4.1 Výběr očekávaného distribučního modelu Očekávaný distribuční model závisí na druhu charakteristiky. Pro důležité druhy charakteristik (viz také VW 01056) jsou přiřazeny distribuční modely uvedeny v tabulce 2. ## Tabulka 2 – Přiřazení druhů charakteristik a distribuční modely | Druh charakteristiky | Distribuční model | |---------------------------|-------------------| | Délkové rozměry | N | | Průměr, radius | N | | Plošnost | B1 | | Rovnoust | B1 | | Křivkovost | B1 | | Václový tvar | B1 | | Linijový tvar | B1 | | Plošný tvar | B1 | | Rovnběžnost | B1 | | Kolmost | B1 | | Sklon | B2 | | Pozice | B2 | | Sousous | B2 | | Symetrie | B1 | | Házivost | B2 | | Pohyb v rovině | B2 | | Drsnost | B1 | | Neváženost | B2 | | Krouticí moment | N | **Legenda:** N: Normální rozdělení B1: Weibullovo rozdělení B2: Rayleighovo rozdělení Pro neuvedené druhy charakteristik lze ve většině případů provést přiřazení rozdělení podle následujících pravidel: - u oboustranně nebo jednostranně dolů tolerovaných charakteristik normální rozdělení - a u jednostranně nahoru tolerovaných charakteristik Weibullovo rozdělení nebo Rayleighovo rozdělení Image Analysis: ### Image Analysis #### 1. Localization and Attribution: - **Image Location**: The image encompasses the entire page. - **Image Numbering**: This is the only image on the page, thus referred to as Image 1. #### 4. Text Analysis: - **Text Detection and Extraction**: - **Header**: "Strana 25", "VW 101 30: 2005-02" - **Sections**: - **4.3 Zvláštní pravidla pro omezené MFU** - **4.4 Vyhodnocení dat** - **4.4.1 Výběr očekávaného distribučního modelu** - **Tabulka 2 – Přiřazení druhů charakteristik a distribučních modelů** - **Content Analysis**: - The text is in Czech and appears to be from a technical or regulatory document related to data evaluation and distribution models. - **Key Sections**: - **4.3 Zvláštní pravidla pro omezené MFU**: Discusses special rules for limited MFU. - **4.4 Vyhodnocení dat**: Pertains to data evaluation. - **Tabulka 2**: A table that maps different types of characteristics to specific distribution models. - **Table Explanation**: - **Columns**: - **"Druh charakteristiky"**: Type of characteristic. - **"Distribuční model"**: Distribution model. - **Legend**: - "N": Normální rozdělení (Normal distribution) - "B1": Weibullovo rozdělení (Weibull distribution) - "B2": Rayleighovo rozdělení (Rayleigh distribution) - Other descriptions involve double-sided or one-sided tolerance distribution rules. #### 5. Diagram and Chart Analysis: - **Tabulka 2**: - **Rows/Columns**: Lists various characteristics (e.g., "Délkové rozměry", "Průměr, rádius", etc.) and their corresponding distribution models. - **Legend**: - **N**: Normální rozdělení - **B1**: Weibullovo rozdělení - **B2**: Rayleighovo rozdělení #### 12. Graph and Trend Analysis: - **Interpretation of the Table**: - Various characteristics are linked to different distribution models, providing a structured methodology for data evaluation based on the type of characteristic. - Some characteristics are commonly associated with normal distribution ("N"), while others are linked to Weibull ("B1") or Rayleigh ("B2") distributions. - The table helps in standardizing how data is to be distributed based on the specific characteristic, ensuring consistent and accurate evaluations. #### 19. Tables: - **Table Content**: - **Column 1** (Druh charakteristiky - Type of characteristic): Lists various types of dimensional and physical characteristics (e.g., dimensions, radius, flatness, roundness). - **Column 2** (Distribuční model - Distribution model): Indicates which distribution model fits each characteristic type (N, B1, B2). #### 9. Perspective and Composition: - **Perspective**: The image is a straightforward, top-down view of a text-heavy page. - **Composition**: - Structured in sections, with headings and subheadings clearly delineated. - The table (Tabulka 2) is centered and easily identifiable. - Text is evenly spaced and aligned for readability. #### 19. Process Descriptions: - **Process Description**: - The image outlines a structured process for determining the appropriate distribution model based on the characteristic type. - Provides guidelines for special cases not included in the table. ### Conclusion: This comprehensive analysis of the visual content reveals a technical document page with structured sections, detailed tables, and clear guidance on choosing distribution models based on specific characteristics. The text, tables, and accompanying explanations provide a robust framework for ensuring consistent data evaluation in a presumably engineering or quality control context. #################### File: VW%2010130_CS.pdf Page: 26 Context: ``` ## 4.4.2 Test odlehlých hodnot Pomocí neparametrického testu odlehlých hodnot podle VW 1013/3 je nejprve nutno zjistit, zda zjištěné naměřené hodnoty obsahují odlehlé hodnoty. Odlehlé hodnoty jsou naměřené hodnoty, které leží do jisté vzdálenosti od jinde naměřených hodnot tak daleko, že s vysokou pravděpodobností nepatří k této populaci. Tato měření, test na odlehlé hodnoty je nutno provést s koeficientem spolehlivosti 95%. ## 4.4.3 Výjimečné odlehlé hodnoty z výpočtu statistických ukazatelů V případě identifikovaných odlehlých hodnot nejsou tyto hodnoty zohledněny při výpočtu statistických ukazatelů. Odlehlé hodnoty však nesmí být smazány. Naopak je nutno je vygenerovat v zobrazené podobě jednotlivých hodnot odpovídajícími způsoby označit a uvést je do příslušné dokumentace. ## 4.4.4 Test změny polohy výroby S pomocí parametrického testu podle Swed-Eisenharta (viz [1]) je nutno zjistit, zda se při výběru vzorku systematicky změnila poloha výroby. Systematická změna polohy výrobků může vzniknout např. vlivem teploty opotřebení materiálu (trendový průběh). Tento test je nutno provést s koeficientem spolehlivosti 95%. Pokud použité pro výpočtové zjištěné rozdílení určitých zatížených naměřených hodnot, nelez tento test použít. ## 4.4.5 Test odchylek od stanoveného distribučního modelu Je nutno prověřit zjištěné naměřené hodnoty, zda nevykazují signifikantní odchylku od distribučního modelu, který byl pro příslušný znak stanoven. K tomu je nutno v případě zjištěného normálního rozdělení provést test podle Epps-Pulley (viz 150 5479) a v případě jiné statické distribuční model, např. v Weibullově rozdělení nebo Rayleighova rozdělení, test podle Nývarta (viz [1]) s koeficientem spolehlivosti 95%. Odchylka od zjištěného distribučního modelu může vzniknout např. rozdělením šarží materiálu při odběru vzorku (smíšené rozdělení, viz příklad 3 v oddílu 5). Odchylka od zjištěného distribučního modelu může vzniknout např. odběrem vzorku z různě nadřazené distribuční, viz příklad 3 v oddílu 5. ## 4.4.6 Vyhodnocení podmínek normálního rozdělení V případě stanoveného aproximováním normálního rozdělení nebo aproximováním normálního rozdělení podle kritérií (1.1), (1.22), ve kterém naměřené hodnoty nevykazují signifikantní odchylku od distribučního modelu, se provede výpočet charakteristických vlastností v závislosti na toleranci podílu vzorců (2.1) až (2.5), přičemž se hraniční intervaly spolehlivosti zjistí podle pozice (2.6). ## 4.4.7 Vyhodnocení polohy stanoveného modelu V případě jaké stanoveného distribučního modelu, např. Weibullova rozdělení nebo Rayleighova rozdělení, je nutno prověřit naměřené hodnoty, zda nevykazují signifikantní odchylku od distribučního modelu, se provede výpočet charakteristických vlastností podílu vzorců (2.1) až (2.5), přičemž se charakteristiky přizpůsobeného rozdělení vypočtou podle vzorců (2.15) a (2.16) popř. (2.24) a (2.25) pomocí aproximovaných funkcí (2.18) popř. (2.27) a hraniční intervaly spolehlivosti se vypočte podle aproximovaných funkcí (2.19) popř. (2.28). ``` Image Analysis: ### Text Analysis: - **Image Localization and Numbering:** - This image will be denoted as **Image 1** since there is only one image provided. - **Extracted Text and Content Analysis:** - The text in the image is in Czech and appears to be sections from a technical document, specifically related to tests and processes influenced by certain standards and procedures. - The sections are as follows: - **4.4.2 Test odlehlých hodnot (Test of Outlying Values):** - Discusses the testing of outlier values according to VW 10133 with a confidence interval of 99%. - **4.4.3 Vyloučení odlehlých hodnot z výpočtu statistických ukazatelů (Exclusion of Outliers from Statistical Calculation):** - Procedures for excluding outliers in the calculation of statistical indicators. - **4.4.4 Test změny polohy výroby (Test of Production Position Change):** - Tests based on the Swed-Eisenhart method to determine if systematic shifts in production samples are systematic. - **4.4.5 Test odchylky od stanoveného distribučního modelu (Deviation Test from Established Distribution Model):** - Discusses tests like Epps-Pulley, Weibull, and Rayleigh models, with a 95% confidence interval. - **4.4.6 Vyhodnocení podle normálního rozdělení (Evaluation According to Normal Distribution):** - Outlines the criteria for evaluating against normal distribution and calculated fitting characteristics. - **4.4.7 Vyhodnocení podle stanoveného modelu (Evaluation According to Established Model):** - Similar to the above but uses different distribution models and calculation methods. ### Contextual Significance: - **Context and Role in Document:** - This image appears to be a page from a technical document related to quality control or standards compliance in manufacturing, probably for the automotive industry as indicated by "VW 10133". - The page is an excerpt from a larger document concerned with statistical testing, evaluation of production shifts, and assessment models. - The image contributes towards understanding the specific methodologies and statistical models used in evaluating manufacturing and production processes. ### Color Analysis: - **Color Composition:** - The image is mostly black text on a white background, a common format for printed documents. - The lack of color variation indicates a formal document focusing on the delivery of information rather than visual appeal. ### Perspective and Composition: - **Composition:** - The image is in a standard page format with a clear heading structure, numbered sections, and paragraphs. - This structured approach aids in easy navigation and understanding of the subjected tests and procedures. ### Summary: #################### File: VW%2010130_CS.pdf Page: 26 Context: ### Summary: - **Overall Analysis:** - **Image 1** is a section from a technical manual or standard document related to statistical testing and evaluation methods in production processes. - The document includes detailed descriptions of various tests and their purposes, highlighting procedures, models, confidence intervals, and criteria. - There is no visual data or graph present in the image, and the text is well-structured for a technical audience. This comprehensive analysis encompasses relevant aspects drawn from the provided list, with focus on text and contextual significance as they are the most prominent features in this image. #################### File: VW%2010130_CS.pdf Page: 27 Context: ``` 4.4.8 Neparametrické vyhodnocení Pokud ze statistického testu vyplyne rozpor mezi zjištěnými naměřenými hodnotami a zjištěnými distribučním modelem, nebo pokud se sledované výrobní charakteristiky nelze nalézt výchybném distribučním modelu, pak se provede neparametrický výpočet charakteristik způsobilosti podle vzorce (2.29) až (2.40). 4.5 Dokumentace Dokumentace MFU z hlediska určité charakteristiky musí obsahovat následující informace a záznamy: Data zahrnují: - oddělení, autor a datum vytvoření - údaje o dílu - název, jmenovitý rozměr a tolerance charakteristiky - údaje o stroji - údaje o zkušebních prostředcích - období výroby Výsledky: - grafické znázornění průběhu jednotlivých hodnot se středními hodnotami vzorku s hranicemi liniemi tolerančního intervalu (pokud byly evidovány jednotlivé hodnoty) - histogram s přizpůsobeným distribučním modelem, hranicemi liniemi tolerančního intervalu a oblastí rozptylu a linií střední hodnoty a mediánu - zobrazení v pravděpodobnosti stisí s přizpůsobeným distribučním modelem, hranicemi liniemi tolerančního intervalu a oblastí rozptylu a linií střední hodnoty a mediánu (viz [2]) - počet naměřených hodnot - počet vyhodnocených naměřených hodnot nebo nalezených odchylých hodnot - odhadovaná hodnota polohy výroby - odhadovaná hodnota hranic oblasti rozptylu nebo odhadovaná šíře rozptylu - pozitivity distribuční model - výsledek testu změny polohy výroby - výsledek testu odchylek od stanoveného distribučního modelu - vypočtené charakteristiky způsobilosti Cm a Cmk (se dvěma místy za desetinnou čárkou) - požadované mezi hodnoty Cm a Cmk Upozornění a poznámky: - případné upozornění na omezenou MFU - případné zvláštní dohody mezi dodavatelem a odběratelem - případně zvláštní udalosti během odběru vzorku ``` Image Analysis: ### 1. Localization and Attribution: - **Image Position:** Single image present on the page. - **Image Number:** Image 1. ### 2. Object Detection and Classification: - **Objects Detected:** Text elements in the image. - **Key Features:** - Blocks of textual elements distributed evenly. - Headings for different sections. - Bulleted lists and paragraphs. ### 4. Text Analysis: - **Content of the Text:** - Headings and Section Identifiers: - "4.4.8 Neparametrické vyhodnocení" - "4.5 Dokumentace" - Bulleted Lists: - Contains details about data portion under "Data záhlaví:". - The results under "Výsledky:". - Text Descriptions: - Section 4.4.8 discusses the conditions under which non-parametric evaluation is necessary due to the observed discrepancies among measured values. - Section 4.5 elaborates on the type of documentation required from MFU for certain characteristics. - **Significance:** - The text provides detailed guidelines and protocols for statistical evaluations and documentation within a technical or quality control context. This is crucial for ensuring compliance and standardization. ### 9. Perspective and Composition: - **Perspective:** The document is scanned from a flat, birds-eye view, indicating it is likely a scanned page from a larger document. - **Composition:** - Structured formally with headings, subheadings, bulleted lists, and ordered paragraphs. ### 13. Graph Numbers: - **Data Points:** - The text does not include specific numeric data points but does refer to quantities and results that would typically be numerical, such as the number of sampled points, number of outliers, and median values. ### Prozessbeschreibungen (Process Descriptions): - **Processes Detailed:** - The documentation process for statistical evaluations of manufacturing processes. - Steps for graphical representations, histogram adjustments, and the use of distribution models. ### Typen Bezeichnung (Type Designations): - **Types/Categories:** - Evaluations and documentation processes categorized by: - Graphically represented values. - Histograms and distribution model fits. - Evaluated test results (deviation, positional accuracy, and distribution model adherence). ### Trend and Interpretation: - **Trends:** - Emphasis on non-parametric evaluation when discrepancies are found. - Detailed documentation requirements indicating a trend towards meticulous record-keeping and strict adherence to quality standards. ### Flow and Interpretation: - The structure of the document suggests a flow from identifying the need for non-parametric evaluation, through to detailed documentation requirements and specific results recording. ### Summary: This document segment outlines specific statistical evaluation processes and documentation requirements, particularly focusing on quality control measures within manufacturing processes. The emphasis on non-parametric evaluation and detailed documentation suggests stringent adherence to quality standards and regulatory compliance. #################### File: VW%2010130_CS.pdf Page: 28 Context: 4.6 Posouzení výsledku Na následující posouzení výsledku závisí, zda je možno vyhodnotit stroj z hlediska výroby sledovaných charakteristik jako způsobilý. Pokud jsou během vyhodnocení zjištěny odchylky hodnoty, je nutno zjistit jejich příčinu. Odchylky hodnoty mohou být způsobeny pochybným měřením nebo též, byly jako jakékoli jiné doby jiné jiné než normální. V opačném případě není možné říci, jaké hodnoty, pak by mělo být více než 5 % nebo více z 2 hodnot týchž jako odchylky hodnoty, pak je nutno prověřit, zda nejsou chyby procesu prověřování. MFU je potom nutno případech zopakovat. Pokud se poloha výroby významně změnila, pak musí být zpravdlila změna jejich příčina a musí být akceptovatelný účinek, aby byl splněn předpoklad pro způsobilost stroje (vyjímka platí pro poslední odstavec tohoto oddílu). Pokud existuje neparametrické vyhodnocení na základě signifikantních odchylek od stanoveného modelu a pokud lze posuzované charakteristiky teoreticky přiradit příslušné distribuční model, pak musí být změna příčinu a musí být akceptovatelný účinek, aby byl splněn předpoklad pro způsobilost stroje (vyjímka viz poslední odstavec tohoto oddílu). Pokud není dohodnuto jinak, musí být zjištěné hodnoty způsobilosti při efektivním rozsahu vzorku \( n_b \geq 50 \) (bez odchylek hodnot) splňovat požadavek \[ c_{m}^{2} = 2.0 \, c_{m}^{2} < 1.67 \text{ pro oboustranné tolerovanou charakteristiku} \] \[ c_{m} = 1.67 \text{ pro jednostranné tolerovanou charakteristiku} \] aby bylo možno stroj posoudit jako způsobilý. Pritom je nutno pro srovnání s mezími hodnotami zakotvit zjištěné charakteristiky způsobilosti na dvě desetinná místa, také např. zjištěná hodnota \( c_{k1} = 1.6545 \) pro příslušné zakotvení na 1.67 ještě splňuje požadavek. Pokud efektivním rozsahu vzorku \( 20 \leq n \leq 50 \) je nutno dodržet příslušné výšky hodnoty. Pro některé rozsahy hodnot jako je tabulka 2 uvedeny příslušné mezní hodnoty. Při sjednaní jiné mezní hodnoty na bázi \( n_b \leq 50 \) je nutno příslušné mezní hodnoty zjistit podle vzorců \((3.7) \text{ az } (3.9)\). ## Tabulka 3 – Mezi hodnoty pro způsobilost stroje pro \( 20 \leq n \leq 50 \) | \( n \) | \( \overline{c_m} \) | \( c_m \) | |---------|-----------------|---------| | 20 | 2.28 | 1.93 | | 25 | 2.19 | 1.85 | | 30 | 2.13 | 1.79 | | 35 | 2.05 | 1.74 | | 40 | 1.94 | 1.67 | | 50 | 1.80 | 1.67 | Při vyplynutí hodnoty způsobilosti, která je níže než příslušná mezní hodnota, pak je nutno stroj posoudit jako nezpůsobilý. Image Analysis: ### Analysis of the Attached Visual Content #### Localization and Attribution - **Image 1:** There is only one page containing multiple sections and a table located near the bottom of the page. #### Text Analysis - **Extracted Text:** - Title: "4.6 Posouzení výsledku" - Section headers, paragraphs, and explanations in the Czech language discussing the statistical evaluation of results. - A footnote highlighted with a superscript '10'. #### Diagram and Chart Analysis - **Table Analysis (Tabulka 3 - Mezní hodnoty pro způsobilost stroje pro 20 ≤ n e ≤ 50):** - The table presents "Mezní hodnoty pro způsobilost stroje" (Machine capability limit values) for specific sample sizes. - **Columns:** - **ne:** The sample series sizes (e.g., 20, 25, 30, 35, 40, 45, 50). - **cmk:** Process capability index for a two-sided tolerance. - **cmk:** Process capability index for a one-sided tolerance. - The values in the table: - For ne 20: cmk2 = 2.28, cmk1 = 1.93 - For ne 25: cmk2 = 2.19, cmk1 = 1.85 - For ne 30: cmk2 = 2.13, cmk1 = 1.79 - For ne 35: cmk2 = 2.06, cmk1 = 1.73 - For ne 40: cmk2 = 2.00, cmk1 = 1.67 - For ne 45: cmk2 = 2.00, cmk1 = 1.67 - For ne 50: cmk2 = 2.00, cmk1 = 1.67 #### Contextual Significance - This text appears to be an excerpt from a technical or quality control document, potentially from a manufacturing process evaluation. - The significance centers around evaluating machine capability, using statistical benchmarks to ensure quality and precision in production. #### Typen Bezeichnung (Type Designations) - **Types or Categories Mentioned:** - odchyle (deviation) - mezní hodnoty (threshold values) - způsobilost stroje (machine capability) #### Trend and Interpretation - **Trend:** - The table shows a decreasing trend in cmk values as the sample size increases from 20 to 35, after which it stabilizes at 2.00 for two-sided tolerance and 1.67 for one-sided tolerance. - **Interpretation:** - This trend indicates that smaller sample sizes require higher capability indices, possibly due to higher variability and uncertainty in measurements. #################### File: VW%2010130_CS.pdf Page: 28 Context: #### Tables - **Table Content Description:** - **ne:** Represents the sample sizes. - **cmk2** and **cmk1:** Represent the capability indices for two-sided and one-sided tolerances, respectively. - **Data Points:** - The table provides specific value thresholds required for machine capability validation. Overall, the document is focused on machine capability evaluation using statistical methods, emphasizing the importance of adherence to specified thresholds in manufacturing processes. #################### File: VW%2010130_CS.pdf Page: 29 Context: # Strana 29 VW 101 30: 2005-02 Při zjištěné hodnotě způsobilosti \( C_{mk} \) = 2,33 (odpovídá 14 a) a pro obustraně tolerované charakteristiky dodatečné při \( C_{mk} \) ≥ 2,67 (odpovídá 16 b) lze stroj z hlediska sledovaných charakteristik také nezávisle na signifikantní změně polohy nebo odchylech od stanoveného distribučního modelu posoudit jako způsobilý. ## 4.7 Optimalizace strojů Pro případ, že by nebylo možno z hlediska prověřovaných charakteristik prokázat způsobilost stroje, jsou nutná opatření pro optimalizaci stroje. Za tímto účelem je nutno identifikovat příslušné vlivy (např. pomocí statistické metody zkoušek DOE) a odstranit je. ## 4.8 Nakládání a nezpůsobilými stroji Pokud nelze způsobilost stroje dosáhnout ekonomickými účely při optimalizaci, může být nejprve pomocí statistického výpočtu tolerance podle VW 01057 prověřeno, zda je možné dosáhnout způsobilosti stroje prostřednictvím rozšířené tolerance. Pokud není ani tímto opatřením možné dosáhnout způsobilosti stroje, je nutno se rozhodnout, zda bude stroj převzat podle následujících pravidel, nebo nikoliv. Tato zvláštní pravidla by měla obsahovat následující body: - zdůvodnění pro přejímku - vyhodnocení rizika a nákladů - případné omezené podmínky pro výrobu a dodatečné podmínky pro zkoušky - uvedení zodpovědností Image Analysis: **Image Analysis Report:** ### Localization and Attribution: - **Image Number:** 1 (Only one image is present on the page). ### Text Analysis: - **Detected Text:** ``` Strana 29 VW 101 30: 2005-02 Při zjištěné hodnotě způsobilosti č_mk ≥ 2,33 (odpovídá 14 σ) a pro oboustranně tolerované charakteristiky dodatečné při č_mk ≥ 2,67 (odpovídá 16 σ) lze stroj z hlediska sledované charakteristiky také nezávisle na signifikantní změně polohy nebo odchylce od stanoveného distribučního modelu posoudit jako způsobilý. 4.7 Optimalizace stroje Pro případ, že by nebylo možno z hlediska prověřované charakteristiky prokázat způsobilost stroje, jsou nutná opatření pro optimalizaci stroje. Za tímto účelem je nutno identifikovat příslušné vlivy (např. pomocí statistické metodiky zkoušek DOE) a odstranit je. 4.8 Nakládání s nezpůsobilými stroji Pokud nelze způsobilost stroje dosáhnout ekonomicky účelnými optimalizacemi, pak by mělo být nejprve pomocí statistického výpočtu tolerance podle VW 01057 pověřeno, zda je možno pro dosažení způsobilosti stroje provést rozšíření tolerance. Pokud není ani tímto opatřením možno dosáhnout způsobilosti stroje, je nutno se rozhodnout, zda bude stroj převzat podle přesně specifikovaných zvláštních pravidel, nebo nikoliv. Tato zvláštní pravidla by měla obsahovat následující body: - zdůvodnění pro přejímku - vyhodnocení rizika a nákladů - případné omezené podmínky pro výrobu a dodatečné podmínky pro zkoušky - uvedení zodpovědnosti ``` - **Content Analysis:** - **Section 4.7: Optimalizace stroje** - This section discusses the necessary measures for optimizing machinery in case its capability cannot be proven with respect to examined characteristics. It emphasizes identifying and removing relevant influences using statistical testing methods (e.g., DOE tests). - **Section 4.8: Nakládání s nezpůsobilými stroji** - This section provides guidance on handling non-compliant machinery. It suggests first utilizing statistical tolerance calculations as per VW 01057 to determine the feasibility of extending tolerance to achieve capability. If this is not possible, it outlines the decision-making process for whether to accept the machine based on specific rules, which should include: - Justification for acceptance - Risk and cost assessment - Potential restrictive conditions for production and additional testing conditions - Accountability ### Contextual Significance: - **Document Context:** - The image likely represents a technical manual or guideline related to the optimization and management of machinery within a manufacturing or industrial setting. The text provides detailed procedures and considerations for ensuring machinery meets required specifications and how to handle situations when it does not. - **Significance of the Text:** - The text is critical for quality control and process optimization in manufacturing. It ensures that machinery operates within acceptable parameters and outlines clear steps for addressing deviations, emphasizing statistical validation and cost-effective measures. Overall, the detailed text provides significant insight into the technical and procedural standards necessary for ensuring machinery operability and compliance in an industrial context. #################### File: VW%2010130_CS.pdf Page: 30 Context: # 5 Příklady ## Příklad 1 Průměr hřídele s jmenovitým průměrem 20 mm, minimálním rozměrem \( G_u = 19,7 \, \text{mm} \) a maximálním rozměrem \( G_s = 20,3 \, \text{mm} \). Z = 50 naměřených hodnot vzorku nevyplynuly ve statistických testech žádné odchylkové hodnoty, žádné signifikantní změny polohy a žádné signifikantní odchylky od očekávaného normálního rozdělení. Byly zjištěny následující charakteristiky namátkových vzorků: - \( \bar{x} = 20,05 \) - \( a = s = 0,05 \) Proto podle vzorce (2.11) z charakteristik vzorků vyplynuly následující odhadnuté hodnoty hranic rozptylu pro normální rozdělení základní soubor: \[ x_{0.975} = \bar{x} + a = (20,05 - 3 \cdot 0,05) \, \text{mm} = 19,9 \, \text{mm} \] a z toho nakonec vyplynou následující charakteristiky způsobilosti: \[ G_u - G_s = 20,3 - 19,7 = 2,0 \] \[ \bar{c}_m = \min \left( \frac{G_u - G_s}{x_{0.865}} \right) = \frac{20,3 - 19,7}{x_{0.136} \cdot a} = \frac{2,0}{x_{0.865}} = 2,0 \] Pomocí zjištěných charakteristik způsobilosti se tak prokázalo, že stroj z hlediska posuzovaného průměru hřídele právě ještě splňuje požadavky na způsobilost. Výsledek je znázorněn na obrázku 12. ## Obrázek 12 **Příklad výroby s modelem normálního rozdělení a charakteristikami způsobilosti** \( C_m = 2,0, \; C_{m} = 1,67 \) Image Analysis: ### Analysis of Provided Image #### 1. Localization and Attribution: - **Image 1**: The entire page consists mainly of textual content with two subsections. There is one specific visual component: - **Image 1**: Located at the bottom of the page (graph/chart). #### 2. Object Detection and Classification: - **Image 1**: The objects in the image include: - A normal distribution graph (bell curve) indicating statistical data. - Vertical lines and bars illustrating different data points. #### 3. Scene and Activity Analysis: - **Image 1**: The scene focuses on a normal distribution graph used to explain statistical characteristics of a manufacturing process. The main activity is the visualization of data to interpret manufacturing consistency and capability. #### 4. Text Analysis: - **Text Content**: - **Header**: "Strana 30 VW 101 30: 2005-02" indicating the document page and reference number. - **Title**: "5 Příklady" which means "5 Examples." - **Subsection**: "Příklad 1" meaning "Example 1." - The subsequent text includes detailed statistical calculations and assessments related to a production process. - **Figures and Equation Descriptions**: This includes formulae and symbols for statistical parameters such as mean (\(\mu\)), standard deviation (\(\sigma\)), and capability indices (\(C_m\), \(C_{mk}\)). - **Diagram Caption**: "Obrázek 12 – Příklad výroby s modelem normálního rozdělení a charakteristikami způsobilosti C_m = 2,0 a C_{mk} = 1,67". This describes the graph as an example of production with a normal distribution model and certain capability characteristics. #### 5. Diagram and Chart Analysis: - **Image 1**: - **Data Range**: X-axis represents 'Naměřená hodnota' (Measured Value); Y-axis represents 'Četnost' (Frequency). - **Graph Interpretation**: The normal distribution graph displays observed variations in production measurements. The central peak represents the average value with spread indicating the standard deviation. - **Key Insight**: A capability index (\(C_m = 2.0\), \(C_{mk} = 1.67\)) signifies the process's ability to produce within specified limits. #### 14. Tables: - **Equation and Data Interpretation**: - Various equations are presented with specific values and parameters that explain the calculation of process capability and variability. - Capabilities depicted through: - \(C_m = \frac{20,3 - 19,7}{2 \cdot 0,15}\approx 2.0\) - \(C_{mk} = \min(\frac{20,3 - 20,05}{3 \cdot 0,15}, \frac{20,05 - 19,7}{3 \cdot 0,15}) \approx 1.67\) ### Additional Observations: #### Anomaly Detection: - No noticeable anomalies in the diagram or text. #### Color Analysis: - The document is primarily grayscale with black text and lines to denote various statistical data points clearly. #### Perspective and Composition: - Document Layout: Standard vertical orientation with sequential flow from top to bottom. - Graph Composition: Center-aligned at the bottom of the page with clear axes and labeled sections. #### Contextual Significance: - The provided example is an instructional aid focused on demonstrating statistical quality control in a manufacturing environment. The integration of text and graph aids in explaining the practical application of theoretical statistical concepts. #### Process Descriptions: - Describes a process for evaluating the manufacturing capability of a cylindrical component, involving mean diameter calculations and statistical capability indices. By analyzing the image and its content, we can conclude that it serves as an educational example of statistical quality control in a manufacturing context, providing detailed calculations and graphical representations to explain the processes involved. #################### File: VW%2010130_CS.pdf Page: 31 Context: # Příklad 2: Otvór s maximální odchylkou polohy \( G_s = 0,2 \, \text{mm} \). Z = 50 naměřených hodnot vzorku nevyplnily ve statistických testech žádné odchyle. Žádné signifikantní změny polohy a žádné signifikantní odchylky od očekávaného Rayleighova rozdělení. Byly zjištěny následující charakteristiky naměřených vzorků: \[ \overline{\mu} = -0,038 \, \text{mm} \] \[ a = s = 0,02 \, \text{mm} \\ \text{Z charakteristiky způsobilosti vyplyne poměr} \, \frac{\overline{\mu}}{a} = \frac{-0,038}{0,02} = -1,9 \] Protože tato hodnota na základě náhodného rozptylu charakteristik vzorků menší, než zmíněná hodnota 1,9131 podle podmínky (2.23), je poměr nastaven na tuto nemí hodnotu, z čehož opět vyplývá excentricita \( z = 0 \). Tak lze druhu hodnotu parametru přizpůsobovaného Rayleighova rozdělení spočítat následujícím způsobem podle zvláštního případu (2.26): \[ \alpha_n = 1,526 - 0,02 = 1,506 \, 0,0305\, \text{mm} \] Ze vzorců (2.27) vyplývají odhadované hodnoty hranic oblasti rozptylu: \[ x_{0,865} = 5,5485 - 0,02 = 5,5485 - 0,2111 \] \[ x_{0,135} = 0,0773 - 0,0773 - 0,02 \, 0,0016 \, \text{mm} \] Ze vzorců (2.3) a (2.4) nakonec vyplynou následující charakteristiky způsobilosti: \[ \overline{c}_m = \frac{x_{0,865}-\overline{\mu}}{a} = \frac{5,86965 - (-0,038)}{0,111 - 0,0016} = 1,83 \\ G_s = \frac{x_{0,865} - 0,2}{0,2 - 0,038} = \frac{5,86965 - 0,2}{0,2 - 0,038} = 2,22 \] Výsledky vyhodnocení je znázorněno na obrázku 13. ### Obrázek 13 – Příklad výroby s modelem Rayleighova rozdělení a charakteristikami způsobilosti \( \overline{c}_m = 1,83 \, \text{a} \, c_m^k = 2,22 \) Pomocí zjištěné charakteristiky \( c_m \) se tak prokáže, že stroj z hlediska odchylek polohy otvoru dobře splňuje požadavky na způsobilost. Pro hodnotu \( G_s \) sice neví i jednoduché náhory tolerovaném případě definována žádné mezní hodnotu, avšak porovnáním s hodnotou \( c_m \) vyplývá informace o poloze výroby, přičemž nežší hodnota \( G_s \) udává, že leží spíše blíže přirozené nulové hranici než maximálním rozměrům. Image Analysis: Here is a comprehensive examination of the attached visual content based on the requested aspects: --- ### 1. Localization and Attribution: - **Image Number:** 1 - **Number of Images on Page:** 1 ### 2. Object Detection and Classification: - **Image 1:** - **Objects Detected:** - A graph with labeled axes - Text explanations and calculations ### 3. Scene and Activity Analysis: - **Image 1:** - **Scene Description:** The scene includes a page of text with a mathematical example (Příklad 2), along with calculations and explanations of various statistical characteristics and a histogram (Obrázek 13). - **Activities:** - Displaying data analysis - Describing analytical results ### 4. Text Analysis: - **Text Detected:** - **Příklad 2:** - Detailed explanation of the example including statistical tests and calculations. - Includes various calculated parameters: - \(\hat{\mu} = -0,038 mm\), \(a = s = 0,02 mm\) - Other significant formulas and statistical parameters. - **Graph Title:** - "Obrázek 13 – Příklad výroby s modelem Rayleighova rozdělení a charakteristikami způsobilosti \(c_m = 1,83 a c_{mk} = 2,22\)" - **Graph Axis Labels:** - Vertical Axis: "Četnost" (Frequency) - Horizontal Axis: "Naměřená hodnota" (Measured Value) ### 5. Diagram and Chart Analysis: - **Image 1:** - **Type of Diagram/Chart:** - A histogram showing the distribution of measured values. - **Axes, Scales, and Legends:** - **Vertical Axis (Frequency)** labeled "Četnost" - **Horizontal Axis (Measured Value)** labeled "Naměřená hodnota" - **Insights:** - The histogram depicts how the measured values are distributed and compares these with certain statistical thresholds. ### 13. Graph Numbers: - **Data Points and Values:** - Numerical data points and threshold values are derived from statistical properties: - \( \hat{\mu} \) - \( \hat{\sigma} \) - \( a \) - \( c_m \) - \( c_{mk} \) ### Additional Aspects: - **Ablaufprozesse (Process Flows):** - The process described includes taking 50 measurements and assessing their statistical properties. - **Prozessbeschreibungen (Process Descriptions):** - Step-by-step calculations of statistical measures. - **Trend and Interpretation:** - Comparison of \( \hat{\mu} \) and \( \hat{\sigma} \) with expected values. - Analysis of machine capability metrics \( c_m \) and \( c_{mk} \). --- ### Contextual Significance: - **Significance:** - The image contributes to a technical or statistical analysis document, enhancing understanding of machine capability and variation using a Rayleigh distribution model. ### Metadata Analysis: - There is no visible metadata in the image to contribute to the analysis. --- This examination integrates multiple requested aspects of the visual content, providing a detailed overview and interpretation of the text, diagram, and contextual significance. #################### File: VW%2010130_CS.pdf Page: 32 Context: # Strana 32 VW 101 30: 2005-02 ## Příklad 3: Průměr hřídele s jmenovitým průměrem 20 mm, minimálním rozměrem Gₓ = 19,7 mm a maximálním rozměrem Gₕ = 20,3 mm. Z = 50 naměřených hodnot vzorku nevyplynuly ve statistických testech žádné odlehlé hodnoty a žádné signifikantní změny polohy, avšak signifikantní odchylka od očekávaného normálního rozdělení. Proto se provedly nepramenité výpočty podle oddílu 3.2.2. Za tímto účelem byly zjištěny následující charakteristiky namátkových vzorků: - \[ \bar{x}_{s} = 20,02 \, \text{mm} \] - \[ x_{\text{max}} = 20,19 \, \text{mm} \] - \[ x_{\text{min}} = 19,85 \, \text{mm} \] **Opravným faktorem podle vzorce (2.38) a tabulky 1:** \[ k = \frac{d}{4} = 1,33 \] **Rozpětí podle vzorce (2.37):** \[ R = x_{\text{max}} - x_{\text{min}} = (20,19 - 19,85) \, \text{mm} = 0,34 \, \text{mm} \] **Podle vzorce (2.36):** \[ \bar{x}_{c} = \frac{x_{\text{max}} + x_{\text{min}}}{2} = \frac{20,19 + 19,85}{2} = 20,02 \, \text{mm} \] **Odvozené hodnoty pro hranice oblasti rozptylu podle vzorce (2.35):** \[ \bar{x}_{k} = \bar{x}_{c} \pm k \cdot \frac{R}{2} \] \[ \bar{x}_{k} = 20,02 \pm 1,33 \cdot 0,34 \] \[ \bar{x}_{k} = 20,02 \pm 0,45 \approx 20,246 \, \text{mm}, \, \sigma_{k} = 19,794 \, \text{mm} \] **Tak ze vzorců (2.29) a (2.30) vyplynuly následující charakteristiky způsobilosti:** \[ c_{m} = \frac{G_{u} - \bar{x}_{s}}{G_{u} - G_{l}} = \frac{20,3 - 19,7}{20,3 - 19,7} = 1,33 \] \[ c_{m} = \min\left(1, \frac{\bar{x}_{s} - x_{\text{min}}}{x_{\text{max}} - \bar{x}_{s}} \right) \] \[ c_{m} = \frac{20,02 - 19,85}{20,19 - 20,02} = 1,24 \] **Výsledek vyhodnocení je znázorněn na obrázku 14.** ## Obrázek 14 **Příklad výrobů s definovaným distribučním modelem s charakteristikami způsobilosti \( C_{m} = 1,33 \) a \( C_{mk} = 1,24 \)** Ze zjištěných charakteristik způsobilosti tak vyplývá, že stroj z hlediska posuzované charakteristiky nesplňuje požadavky na způsobilost. Zajímavou informací této souvislosti poskytuje signifikantní odchylka od očekávaného normálního rozdělení. Neboť z toho je zřejmý potenciál pro optimalizaci, jako zde v případě smíšeného rozdělení. Image Analysis: ### Localization and Attribution: - **Image 1:** This image occupies the top part of the document. It consists of a textual explanation followed by mathematical formulas. - **Image 2:** A histogram chart located in the lower part of the document, illustrating data related to the preceding textual content. ### Text Analysis (Image 1): - **Image 1:** - The text appears to be technical in nature, likely focusing on statistical analysis related to a manufacturing process. - The document starts by specifying a standard diameter of a shaft (20 mm) and discusses the statistical properties of a sample of 50 measurements with no significant deviation detected from the expected normal distribution. - Several mathematical formulas and calculations follow, focusing on mean, variance, and corrected factors. Each formula references specific equations, such as `(2.35)`, `(2.36)`, and `(2.38)`, which likely belong to a larger set of rules or standards. ### Diagram and Chart Analysis (Image 2): - **Image 2 (Chart):** - The chart is titled "Obrázek 14 – Příklad výroby s definovaným distribučním modelem s charakteristikami způsobilosti Cm = 1,33 a Cmk = 1,24". - **Axes:** - X-axis labeled "Naměřená hodnota" and represents measured values ranging from 19.7 to 20.4. - Y-axis labeled "četnost" and represents frequency. - **Bars in Histogram:** - The histogram displays frequency data for specific measurement ranges. - Key values such as \( G_u = 20.3 \) mm, \( G_m = 20.2 \) mm, and \( G_l = 19.9 \) mm are highlighted within the chart. - **Significance:** - The chart exemplifies the distribution of measurements with specific capability indices \( C_m \) and \( C_{mk} \). - The values and distribution imply the evaluated samples generally fit within the normal distribution but highlight areas for potential optimization around smíšené (mixed) distribution. ### Anomaly Detection: - No evident anomalies in both images. The histogram and the accompanying formulas and text appear consistent and relevant to each other. ### Color Analysis (Image 2): - **Image 2:** - Primarily grayscale with key features such as bars, labels, and lines. The histogram bars have varying shades to differentiate frequencies clearly. ### Perspective and Composition: - **Image 1:** - The text is written in a structured, sequential format, with formulas and calculations following a logical order. - **Image 2:** - The histogram uses a standardized format common for statistical data, with a clear and concise layout to enhance readability and interpretability. ### Contextual Significance: - **Overall Contribution:** - The document, likely a technical report, uses the histogram to visualize the statistical findings complementing the text and mathematical analysis. It underscores the consistency and accuracy of the manufacturing process measurements. ### Graph and Trend Analysis: - **Image 2:** - The histogram suggests that most measurements lie within a narrow range close to the mean value, signifying a well-maintained process with potential areas for improvement based on capability indices. ### Conclusion: This document segment, including both text and histogram, provides a thorough examination of a manufacturing process's statistical properties. The combination of detailed textual analysis and visual representation form a comprehensive assessment indicating the process efficiency and areas for potential optimization. #################### File: VW%2010130_CS.pdf Page: 33 Context: # 6 Související podklady - **VW 010 56** Zeichnungen; Form- und Lagetoleranzen [Výkresy; Tvarové a polohové toleranace] - **VW 010 57** Statistische Toleranzrechnung von Maßketten [Statistické výpočty tolerancí rozměrových řetězců] - **VW 101 33** Test auf Ausreißer [Test odlehlých hodnot] - **DIN 55319** Qualitätsfähigkeitskenngrößen [Charakteristiky kvalitativní způsobilosti] - **ISO 5479** Statistical interpretation of data - Tests for departure from the normal distribution [Statistická interpretace dat – testy odchylek od normálního rozdělení] # 7 Odkazy na literaturu 1. Graf, Henning, Stange, Willich. Formeln und Tabellen der angewandten mathematischen Statistik, Springer-Verlag, Dritte Auflage, 1987 [Graf, Henning, Stange, Willich, Vzorce a tabulky aplikované matematické statistiky, Springer-Verlag, Dritte Auflage, 1987] 2. Kühlmeyer M. Statistische Auswertungsmethoden für Ingenieure, Springer-Verlag, 2001 [Kühlmeyer M., Statistické vyhodnocovací metody pro inženýry, Springer-Verlag, 2001] Image Analysis: ### Image Analysis #### 1. Localization and Attribution - **Image Identification**: This is the sole image provided. - **Image Numbering**: Image 1. #### 2. Object Detection and Classification - **Detected Objects**: - Text blocks. - Numerals indicating sections (6 and 7). - Reference codes (VW 010 56, VW 010 57, VW 101 33, DIN 55319, ISO 5479). - Reference texts for literature sources [1] and [2]. #### 4. Text Analysis **Detected Text**: - **Section 6** (Související podklady): - VW 010 56 Zeichnungen; Form- und Lagetoleranzen [Výkresy; Tvarové a polohové tolerance] - VW 010 57 Statistische Toleranzrechnung von Maßketten [Statistické výpočty tolerancí rozměrových řetězců] - VW 101 33 Test auf Ausreißer [Test odlehlých hodnot] - DIN 55319 Qualitätsfähigkeitskenngrößen [Charakteristiky kvalitativní způsobilosti] - ISO 5479 Statistical interpretation of data - Tests for departure from the normal distribution [Statistická interpretace dat – testy odchylek od normálního rozdělení] - **Section 7** (Odkazy na literaturu): - [1] Graf, Henning, Stange, WIlrich, Formeln und Tabellen der angewandten mathematischen Statistik. Springer-Verlag. Dritte Auflage. 1987 [Graf, Henning, Stange, Wilrich, Vzorce a tabulky aplikované matematické statistiky, Springer-Verlag, Dritte Auflage, 1987] - [2] Kühlmeyer M., Statistische Auswertungsmethoden für Ingenieure, Springer-Verlag, 2001 [Kühlmeyer M., Statistické vyhodnocovací metody pro inženýry, Springer-Verlag, 2001] **Content Analysis**: - **Section 6** lists various standards and tests related to statistical tolerance calculation, quality capability indexes, and statistical data interpretation. Each item includes both the original German titles and Czech translations. - **Section 7** lists references to literature relevant to the topics discussed in Section 6. These references include detailed bibliographic information about books on applied mathematical statistics and statistical evaluation methods for engineers. #### 9. Perspective and Composition - **Perspective**: The image is a direct top-view scan of a document page, likely extracted from a technical or academic publication. - **Composition**: The text is structured into two main sections (Související podklady and Odkazy na literaturu) with bullets and references clearly listed and neatly formatted. #### 10. Contextual Significance - **Document Context**: This page appears to be part of a technical document or a standardization handbook related to statistical methods in engineering and manufacturing. - **Contribution to Overall Message**: The sections provide critical references and background information necessary for understanding statistical tolerance calculations and quality control measures. They also direct the reader to additional resources and literature for further reading. #### 12. Graph and Trend Analysis - **Type Designations**: Standards and references listed in Section 6 and Section 7 are designated by specific codes (e.g., VW 010 56, DIN 55319). - **Trend and Interpretation**: The listed standards indicate a trend towards rigorous, standardized approaches in statistical process control and quality management in manufacturing. ### Summary The image presents a well-structured reference page from a technical document, listing standards (in two languages) and literature sources related to statistical methods in engineering. It emphasizes scholarly references and standardized practices in statistical tolerance and quality assessment. #################### File: VW%2010130_CS.pdf Page: 34 Context: # 8 Seznam hesel | Heslo | Strana | Heslo | Strana | |------------------------------------------------|----------|------------------------------------------------|----------| | A | | O | | | a riziko | 20 | očekávaná hodnota v rozdělení 𝑖 | 17 | | absolutní činnost a | 10, 17 | odběr namátkových vzorků | 24 | | absolutní distribuční funkce 𝑓 | 17 | odhad / odhadované hodnoty | 8,9 | | alternativní hypotéza | 20 | odlehlé hodnoty | 20,26 | | B | | omezená MFU | 25 | | b riziko | 20 | opravný faktor | 29 | | C | | P | | | capability | 3 | parametr rozdělení | 3 | | D | | podmínky pro MFU | 24 | | distribuční funkce 𝑓(𝑥) | 5 | poloha | 3 | | dokumentace | 27 | polohy výroby | 3,28 | | druh charakteristiky | 4,25 | poruchy stroje | 24 | | E | | pořadí výroby | 28 | | efektivní rozsah vzorku 𝑛𝑒 | 10, 24 | posun nulového bodu | 6 | | Epps-Pulleyův test | 20,26 | použití zkušebních prostředků | 24 | | extrakce z | 7 | prahová hodnota | 20 | | F | | pravděpodobnost 𝑝 | 5 | | funkce hustoty 𝑓(𝑥) | 24 | pravděpodobnost sítě | 27 | | funkce hustoty pravděpodobnosti 𝑓(𝑥) | 5 | průběh trendu | 26 | | H | | R | | | Hamplevit test | 20 | radiální odchylka | 7 | | hladina významnosti a | 20 | Rayleighovo rozdělení | 7, 13 | | hodnota charakteristiky | 17 | rozdělení | 4 | | hraniče konfidenčního intervalu | 18 | rozdělení četností | 10, 17 | | hranice oblasti rozptylu | 3, 10 | rozdělení či kvadrát | 18 | | K | | rozptyl 𝑐² | 4 | | charakteristiky způsobilosti 𝑐𝑚, 𝑎 | 3, 9 | rozptyl výroby | 3,8 | | koeficient spolehlivosti | 20, 26 | rozsah vzorků | 24 | | kvalita předběžně obhospodařené kvantili | 24 | rozšíření tolerance | 29 | | L | | Run test | 20 | | maximální rozměr 𝐺𝑜 | 3, 9 | | | | medián | 16 | standardizované normální rozdělení | 26,32 | | metoda měření | 24 | - U transformace | 5 | | mezičinné hodnoty pro způsobilost stroje | 18,28 | - distribuční funkce 𝑓(𝑥) | 5 | | minimální rozměr 𝐺𝑢 | 3,9 | - funkce hustoty pravděpodobnosti 𝑓(𝑢) | 5 | Image Analysis: 1. **Localization and Attribution:** - The entire content forms a single image, analyzed as Image 1. 4. **Text Analysis:** - Detected and extracted text: ``` Strana 34 VW 101 30: 2005-02 8 Seznam hesel Heslo Strana Heslo Strana Heslo Strana A náhodné vlivy 3 H ampelvý test 20,26 a riziko 20 neparametrický odhad 16, 27 absolutní četnost a 10, 17 normální rozdělení 4,1 absolutní distribuční funkce A 17 nulová hypotéza 20 alternativní hypotéza 20 P očekávaná hodnota v rozdělení 17 B odběr námatkových vzorků 24 B riziko 20 odhad / odhadované hodnoty 8,9 capability 3 odlehlé hodnoty 20,26 D omezená MFU 25 P distribuční funkce F(x) 5 opravný faktor k 17 diskrétní model 4 optimalizace stroje 29 dokumentace 27 P druh charakteristiky 4,25 parametr rozdělení 3 efektivní rozsah vzorků ne 10, 24 podmínky pro MFU 24 Epps-Pullejv test 20,26 poloha 3 extrémně t 7 polohy výroby 3,28 F poruchy stroje 24 funkce hustoty f(x) 4 pořadí výroby 24 funkce hustoty pravděpodobnosti f(x) 4 posouzení výsledku 28 H posun nulového bodu 6 Hampeiv test 20 použití zkušebních prostředků 24 hladina významnosti a 20 prahová hodnota 20 hodnota charakteristiky 3 pravděpodobnost p 5 hranice konfidenčního intervalu 18 pravděpodobnostní síť 27 hranice oblasti rozptylu 3 průběh trendů 26 Q radiální odchylka r 7 charakteristiky způsobilosti cm, a 3, 9 Rayleighovo rozdělení 7, 13 cpm 20 rozdělení 4 K rozdělení četností 10, 17 koeficient smělpvostí r 7 rozdělení chí kvadrát 18 kvaita předběžného ``` - The text is a table of contents or index for a document in Czech language. It lists topics/terms (Heslo) along with the page numbers (Strana) where those terms can be found. The text is structured in a three-column format, with each column listing different terms and their corresponding page numbers. 5. **Diagram and Chart Analysis:** - There are no diagrams or charts present in the image. 8. **Color Analysis:** - The image is predominantly grayscale with black text on a white background. This type of color scheme is often used for readability and clarity in printed documents. 9. **Perspective and Composition:** - The image is taken from a straight-on perspective, typical for scanned or digitally created documents. - The composition is structured and organized in a tabular format, which aids in searching and referencing specific terms. #################### File: VW%2010130_CS.pdf Page: 34 Context: **Overall Summary:** - The image provides a list of terms and their corresponding page references from what appears to be a technical or academic document. It is organized in an alphabetical manner and is intended to help users quickly locate information about specific topics within the document. The clear and systematic presentation enhances usability for readers. #################### File: VW%2010130_CS.pdf Page: 35 Context: # Heslo | Heslo | Strana | Heslo | Strana | |--------------------------------------------|--------------|-------------------------------------------|--------------| | Standardní odchylka σ | 4, 10 | - jednozdanné dolu | 9, 16 | | statistická podlož pod oblast | 18 | - oboustranně | 9, 16 | | statistické testy | 20 | upravené hranice způsobilosti | 19, 28 | | stroj zahřátí na provozní teplotu | 24 | V | | | střední hodnota m | 4.1 | vyhodnocení dat | | | stupeň volnosti | 18 | Výjimka / přenastavení nářadí | 29 | | Swed-Eisenhardtův test | 20 | výpočet statistických tolerancí | | | šířka trůnu Δx | 17 | v rozdělení | | | T | | Weibullovo rozdělení | 5,11 | | test | | | | | - odlehlých hodnot | 20, 26 | zakrouhlo­vání hodnot | 28 | | - stanoveného distribučního modelu | 20, 26 | způsobilosti | | | - změny polohy výroby | 20, 26 | zatříděné naměřené hodnoty | 29 | | toleranční interval | 3, 8 | zjištění způsobilosti | 20 | | tolerovaná charakteristika | 4 | zkušební hodnota | 28 | | - jednozdanně nahoru | 9, 16 | zkušební veličina | 20 | Image Analysis: ### Image Analysis 1. **Localization and Attribution:** - There is only one image on the page. - It is referred to as **Image 1** for the purpose of this analysis. 2. **Text Analysis:** - The image contains a structured list in two columns. - The left column headers translate to "Word" and "Page" in English, and the right column lists numerical values. - The right column headers translate to "Word" and "Page" in English as well, with corresponding values. - The headers suggest this might be a table of contents or an index for a document, as they list terms and corresponding page numbers. - **Detailed Content:** - **Left Column:** - "Standardní odchylka σ" appears on pages 4, 10. - "statistická podílova oblast" appears on page 18. - "statistické testy" on page 20. - Items related to manufacturing processes, tolerance intervals, etc. - **Right Column:** - "jednostranně dolu" and "oboustranně" each appear on pages 9, 10, 16. - "upravěné hranice způsobilotí" spans pages 19, 28. - "výhodnocení dat" is on page 25, among other terms related to data analysis and testing. 3. **Object Detection and Classification:** - The primary object in this image is a textual document, specifically a table. - The main features include headers, rows, and columns filled with text and numerical data. 4. **Color Analysis:** - The image is mostly black text on a white background. - The simplicity of the color scheme ensures high contrast and readability. 5. **Perspective and Composition:** - The perspective is a straightforward, head-on view of the table. - The image is composed of two main columns of text, neatly arranged for clarity. 6. **Contextual Significance:** - This image likely serves as a reference or index within a larger document, possibly a technical manual or a statistical report. - It helps readers locate specific information within the document efficiently. ### Summary: **Image 1** presents a structured table of contents or an index from a document, listing terms related to statistics and manufacturing processes along with their corresponding page numbers. The simple black and white color scheme ensures readability, and the organized composition aids in quick reference. The contextual placement within a larger document implies its role in assisting readers to navigate the contents efficiently. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 1 Context: # Skoda SSP Motorgehäuse (MGH) Automation **Date:** 2024-09-13 **Author:** Ralf Haug --- ## Companies Involved - VDF Boehringer - CORCOM - DMC - Feelers - Hessapp - IMRAS - JOBS - Leadwell - AG - Meccanodora - MORARA - Pffiffer - Ramboud - Sackman - Sigma - SMS - SNK - Tacchella - Witzig & Frank Image Analysis: ### Image Analysis #### 1. Localization and Attribution: - **Image 1**: Only one image present on the page, taking up the entire canvas. #### 2. Object Detection and Classification: - **Image 1**: - **Detected Objects**: - Logos of multiple companies/brands at the bottom (e.g., VDF BOEHRINGER, CORCOM, DMC, FEELER, etc.). - A large, complex industrial layout in the background, possibly a factory or manufacturing plant. #### 3. Scene and Activity Analysis: - **Image 1**: - **Scene Description**: The image appears to show an industrial or manufacturing environment. The background consists of a detailed layout of machinery and equipment, possibly automation lines or production zones. - **Activities**: The focus is on automation within the manufacturing industry. #### 4. Text Analysis: - **Image 1**: - **Detected Text**: - "Skoda SSP Motorgehäuse (MGH) Automation" - "2024-09-13, Ralf Haug" - Various brand and company names at the bottom. - **Text Significance**: - The title "Skoda SSP Motorgehäuse (MGH) Automation" suggests that the image pertains to automation in the manufacturing of Skoda engine housing. - The date and name ("2024-09-13, Ralf Haug") likely indicates the creation date of the document and the author’s name. - Company logos and names indicate collaboration or sponsorship by multiple manufacturers and technical solution providers. #### 5. Diagram and Chart Analysis: - **Image 1**: - The background industrial layout could be considered a form of diagram, representing a factory or production setup. #### 8. Color Analysis: - **Image 1**: - **Dominant Colors**: Shades of teal and white. - **Impact on Perception**: The use of teal creates a professional, calm, and industrially focused feel, aligning with the theme of automation and manufacturing. #### 9. Perspective and Composition: - **Image 1**: - **Perspective**: The layout image in the background is depicted from an overhead/bird’s-eye view, providing a comprehensive view of the industrial setup. - **Composition**: - The text and logos are centrally placed overlaid on the complex industrial layout in the background. - Important informational text is positioned centrally to immediately draw attention. #### 10. Contextual Significance: - **Image 1**: - **Overall Message**: - The image aims to provide an overview of an automation project related to Skoda SSP engine housing, associating it with various industry collaborators. - Emphasizes technological integration and automation in manufacturing. ### Conclusion: This image illustrates the automation efforts for Skoda SSP engine housing, prominently featuring a layout of the automation setup and highlighting collaboration with multiple industrial partners. Dominant teal hues and professional composition underscore the technological and industrial focus of the content. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 2 Context: # Projektdaten **Kunde:** Skoda, Mlada Boleslav **Werkstück:** Motorgehäuse (MGH) SSP **Taktzeit:** 75s **Terminplan:** TBD **Referenzdokument:** TZ. Linka ebrbnai mactryve skrine elektrophonu SSP v5 DE ## Others **Kontakt MAG EK:** Sonja Haas: [sonja.haas@mag-ias.com](mailto:sonja.haas@mag-ias.com) **Kontakt MAG Planung:** Ralf Haug: [ralf.haug@mag-ias.com](mailto:ralf.haug@mag-ias.com) Image Analysis: ### Localization and Attribution: - **Image Position and Number:** - This is a single image on the page, labeled as **Image 1**. ### Object Detection and Classification: - **Image 1:** Contains text and company logos. - **Company Logos:** VDF BOEHRINGER, MAG, FFG. - **Text Blocks:** Various project-related information. ### Text Analysis: **Image 1:** - **Detected Text (Translated where possible):** - **Projekt Daten (Project Data):** - **Kunde:** Skoda, Mlada Boleslav - **Werkstück:** Motorgehäuse (MGH) SSP (Engine Housing SSP) - **Taktzeit:** 75s (Cycle Time: 75 seconds) - **Terminplan:** (Schedule:) - **Reports:** T.Z. Linka obrábění motorové skříně elektropohonů SSP v5 DE (Production Line for Machining Electric Motor Housings SSP v5 DE) - **Others:** - **Kontakt MAG EK:** Sonja Haas; sonja.haas@mag-ias.com - **Kontakt MAG Planung:** Ralf Haug; ralf.haug@mag-ias.com - **Additional Details:** 18.09.2024 (Date: September 18, 2024) - **Analysis of Text Content and Significance:** - The image presents essential project data for a client named Skoda, related to the production of motor housings with a cycle time of 75 seconds. - Contact information for key personnel involved in the project is provided. - The text elucidates the entities responsible for the project and their roles. ### Color Analysis: **Image 1:** - **Dominant Colors:** - **Teal/Green:** Used predominantly for text. - **Red:** "vorab" (preliminary) watermark. - **Blue:** Logos (VDF BOEHRINGER, MAG). - **White:** Background. - **Impact on Perception:** - The use of teal/green is calming and professional, suggesting reliability. - The red watermark "vorab" indicates the document might be a draft or preliminary version. - The white background ensures readability and a clean presentation. ### Perspective and Composition: **Image 1:** - **Perspective:** Straight-on view, typical of document presentations. - **Composition:** - The image is neatly organized with text aligned to the left and logos positioned on the top right. - Contact information and other details are distributed logically, making the document easy to navigate. - **Element Arrangement:** - Hierarchical presentation of project data, making it simple to understand at a glance. ### Contextual Significance: **Image 1:** - **Contextual Analysis:** - The image appears to be a slide from a professional presentation deck related to automotive manufacturing. - It contributes to the overall theme by highlighting crucial project details and contacts associated with the Skoda engine housing project. ### Typen Bezeichnung (Type Designations): - **Project-Related Types:** - The type of material/workpiece involved is designated as "Motorgehäuse (MGH) SSP,” indicating a focus on engine housings for a specific Skoda project. ### Summary: **Image 1** provides a detailed overview of a project involving Skoda and the machining of engine housings. Key details include project data, cycle time, involved parties, and contact information. The professional layout and color scheme support clarity and ease in conveying essential information, while the red "vorab" watermark suggests it is a preliminary document. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 3 Context: # Werkstück ## Gussteil ![Gussteil](image_url_gussteil) ## Bearbeitetes Teil ![Bearbeitetes Teil](image_url_bearbeitetes_teil) ### Details | Bauteil | Motorphänotyp SSP HA LX34 | |----------------------- |-----------------------------| | Zeichnungsnummer | 000.910.13B | | Gewicht des bearbeiteten Teils | (inkl. der Lagerböden 0.369 kg) | | Gehäuse | GEA 903 100 108 (z.B. CNC 18.3600 - ASSI/JS3 [F]) | | Lagerböden | 0A 902 151 A DIN 30910-SINT-D11 | | Material | - | | Grundfläche | - | ### Datum 18.09.2024 ### Hinweis Skoda SSP MGH Automation Image Analysis: ### Localization and Attribution: - **Image 1**: Located in the top-left area, showing "Gussstück." - **Image 2**: Located in the top-center area, showing "Bearbeitetes Teil." - **Image 3**: Located in the top-right area, showing a technical diagram. - **Image 4**: Located in the bottom area, showing a table chart. ### Object Detection and Classification: - **Image 1**: - **Object**: "Gussstück" (casting) of an engine part. - **Key Features**: Metallic, unprocessed engine part with ridges and complex structure. - **Image 2**: - **Object**: "Bearbeitetes Teil" (machined part) of an engine part. - **Key Features**: Similar to Image 1 but highlighted areas are blue, indicating machining or finishing processes applied. - **Image 3**: - **Object**: Technical drawing/diagram of an engine part. - **Key Features**: Contains labels and dimensions that detail the structure of the same part shown in the previous images. - **Image 4**: - **Object**: Table chart. - **Key Features**: Contains detailed information about the part, including weight, materials, and standards. ### Scene and Activity Analysis: - **Image 1**: Depicts the raw, unprocessed version of the engine part ("Gussstück"). - **Image 2**: Shows the same part after machining processes ("Bearbeitetes Teil"), suggesting a transformation or enhancement process. - **Image 3**: Provides a technical blueprint of the part, suitable for engineering or manufacturing use. - **Image 4**: Displays a table with specifications and details about the engine part, aiding in technical documentation. ### Text Analysis: - **Image 4**: - **Extracted Text**: ``` Bauteil: Motorgehäuse SSP HA LX34 Zeichnungsnummer: 00A.901.108 Gewicht des bearbeiteten Teils: 14.675 kg (davon ca. 10 Lagernabe 0.369 kg) Gehäuse 00A 901 108 rot Material: EN AC-AlSi10CuMg-40000 - AlSi1Cu3 (Fe) Lagerbuchse 00A 901 215 A DIN 390101-SINT-D-11 Grundmaße folgt der Zeichnung ``` - **Content Analysis**: - **Bauteil**: Part name, "Motorgehäuse SSP HA LX34" (engine casing). - **Zeichnungsnummer**: Drawing number. - **Gewicht des bearbeiteten Teils**: Weight of the machined part. - **Material**: Specified materials used. - **Lagerbuchse**: Bearing specifications. - **Grundmaße**: Base dimensions. ### Diagram and Chart Analysis: - **Image 3**: - **Axes and Scales**: N/A (technical diagram) - **Legends**: Contains labels indicating different sections and measurements of the engine part. - **Key Insights**: Offers detailed schematics for manufacturing or quality control. ### Process Descriptions: - Images depict the transformation of an engine part from raw casting to a finished machined part. The table and technical diagram provide supplementary information useful in manufacturing or engineering contexts. ### Type Designations: - **Image 1**: "Gussstück" (casting) - **Image 2**: "Bearbeitetes Teil" (machined part) ### Trend and Interpretation: - The images collectively show a progression in manufacturing from raw material to finished product, indicating the stages and technical specifications involved in the process. ### Tables: - **Image 4**: Presents crucial information about the engine part, such as weight, material composition, and relevant standards. ### Color Analysis: - **Image 1**: Dominated by shades of grey, indicating raw metal. - **Image 2**: Includes blue highlights, emphasizing machined areas. - **Image 3**: Predominantly black and white, standard for technical diagrams. ### Perspective and Composition: - **Image 1 and Image 2**: Angled view highlighting different planes of the part. - **Image 3**: Standard flat perspective used for technical clarity. - **Image 4**: Tabular format, focusing on detailed information. ### Contextual Significance: - These images likely serve an engineering or manufacturing document, providing detailed information necessary for the production and quality control of an engine part. ### Metadata Analysis: - **Date**: 18.09.2024. - This date might represent the creation or revision date of the document, giving context to the currency and relevance of the information provided. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 4 Context: # Terminplan ## 7. Terminplan | Activity | 2024 | 2025 | 2026 | 2027 | |-----------------------------------------------|----------|----------|----------|----------| | Bestellungen | | 01/25 | 04/26 | | | Lieferung, Inbetriebnahme und Übergabe | 1. BaP/OP → komplette Automatisierung | 1.8/26 | | | | TB/PVS | | | | | | Nielsen | | | | | | SOP | | | | | **MAG TP folgt** Image Analysis: ### Analysis of the Provided Visual Content #### 1. Localization and Attribution: - The visual content consists of a single image. - **Image 1:** The image fills the entirety of the provided visual space. #### 4. Text Analysis: The text within the image includes several elements: - **Header:** - "Terminplan" (translated: "Schedule") - "7. Terminplan" (translated: "7. Schedule") - **Table:** - **Columns:** Yearly markers 2024, 2025, 2026, 2027 - **Rows/Activities:** - **"Bestellungen"** (translated: "Orders"): 2024 - **"Lieferung, Inbetriebnahme und Übergabe"** (translated: "Delivery, Commissioning and Handover"): 01/25 - 04/26 - **"1.BA/2.BA OP + komplette Automatisierung"** (translated: "1st Phase/2nd Phase OP + complete automation"): 6/25 - 1/26 - **"TBT-PVS"**: 1/8/26 - **"Nul/serie"**: 4/7/26 - **"Primäre Inbetriebnahme LKS-Taktlauf TUZ und Materialwirtschaft"** (translated: "Primary Commissioning LKS Cycle Time TUZ and Material Management"): 1/27 - **"2 Tage Produktion"** (translated: "2 Days Production"): 01/27 - **"SOP"**: 06/27 - **Additional Text:** - "MAG TP folgt" (translated: "MAG TP follows"), which seems to indicate that additional details about the MAG TP will follow. - Footer indicates "Skoda SSP MGH Automation" and the date "18.09.2024". #### 5. Diagram and Chart Analysis: - The chart presents a timeline of activities scheduled from 2024 to 2027. - **X-axis:** Represents the timeline in years. - **Y-Axis:** Represents various activities related to project execution. - **Activities:** Noted in rows, providing a clear timeline for when each activity will commence and conclude. - **Data presentation:** Green bars indicate expected task completion phases, and red markers pinpoint specific events or milestones. #### 12. Graph and Trend Analysis: - **Trend:** The activities are sequentially organized, following a strict timeline indicating progressive project phases. - **2024:** Project initiation with order placements. - **2025-2026:** Delivery, commissioning, handover, and automation setup. - **2026:** Specific operation activities such as TBT-PVS and initial series run. - **2027:** Completion activities including material management commissioning and the start of production. #### 13. Graph Numbers: Detailed dates and sequences for each activity: - **Orders:** Projected in 2024. - **Delivery, Commissioning, Handover:** 01/25 - 04/26. - **1.BA/2.BA OP + Complete Automation:** 6/25 - 1/26. - **TBT-PVS:** 1/8/26. - **Nul/serie:** 4/7/26. - **Primary Commissioning LKS cycle-time TUZ and Material Management:** 1/27. - **2 Days of Production:** 01/27. - **SOP:** 06/27. ### Additional Aspects: #### Ablaufprozesse (Process Flows): The image details a timeline of process flows, highlighting key stages from the initial order to the start of production. It outlines the transition from order placement to final commissioning, emphasizing on significant milestones such as delivery, automation, and testing phases. #### Prozessbeschreibungen (Process Descriptions): - **Bestellungen (Orders):** Initial stage of placing orders. - **Lieferung, Inbetriebnahme und Übergabe (Delivery, Commissioning, Handover):** Transition from equipment delivery to operational status. - **Automation Phases (1.BA/2.BA OP):** Implementation of automation systems. - **Testing and Validation (TBT-PVS):** Ensuring systems function as intended. - **Production Initiation (Nul/serie and 2 Days Production):** Beginning of manufacturing operations. - **SOP (Start of Production):** Final commissioning marking the official start of production. #### Contextual Significance: The image provides a detailed schedule for implementing automation in Skoda SSP MGH. It serves as a project management tool to track progress and ensure all phases are completed on time, highlighting significant milestones and timelines critical for stakeholders. --- This examination offers detailed insights into the visual content, covering various aspects from process flows to textual analyses, contextual relevance, and trend identification. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 5 Context: # Layout ## Manufacturing Line for Skoda SSP MGH ### Basis - WET - Central coolant filtration | Operation | Description | |-----------|----------------------------| | OP 20 | SEPARATOR SODD LOIMO | | | HSK 63, 100 | | OP 30 | SEPARATOR SODD LOIMO | | | HSK 63, 100 | - **MAG Content** - **MAG Content extension** - Supplied by customer ### Workdata / Workpoint - Worksheets: 0024.005.108 ### Tablet - Cycle Time: 75s - Model: Version 22.000 --- Skoda SSP MGH Automation 18.09.2024 Image Analysis: ### 1. **Localization and Attribution:** - This image is the only one present on the page and can be referred to as **Image 1**. ### 2. **Object Detection and Classification:** - **Image 1** contains engineering diagrams of a manufacturing line. - Key features of the detected objects: - Machines and equipment illustrated with detailed schematics. - Different sections with distinct classification labels. ### 3. **Scene and Activity Analysis:** - The entire scene is a technical diagram illustrating a manufacturing line for Skoda SSP MGH. - The activity depicted includes the various stages of the manufacturing process with specific machines and central coolant filtration. ### 4. **Text Analysis:** - Detected text in **Image 1**: - "Manufacturing Line for Skoda SSP MGH" - "Basis - WET - Central coolant filtration" - Various operational points (e.g., "OP 10", "OP 20", "OP 30"). - Manufacturer details and workshop information at the bottom. - Significance: This text explains the purpose of the diagram and provides labels for different operational points and manufacturing components. ### 5. **Diagram and Chart Analysis:** - **Image 1** contains an engineering layout diagram. - It shows the manufacturing process from different operational points: - OP 10 (SPERDIT SDQUIZO LIMOD). - OP 20 (SPERDIT SDQULO LIMOD AF-AEH). - OP 30 (SPERDIT SDQULO LIMOD AF-AEH HSK 100, WE). - Details on cycle time (`75s`), unit volume (`22,000 QE`), and date (`18.09.2024`). ### 6. **Product Analysis:** - The products depicted are part of a manufacturing line for Skoda SSP MGH, specifically focused on WET - Central coolant filtration. - Main features include various operational and machine components necessary for the manufacturing process. ### 7. **Anomaly Detection:** - There are no noticeable anomalies or unusual elements in **Image 1**. Everything appears to be in line with what one would expect in an engineering diagram. ### 9. **Color Analysis:** - Dominant colors: Blue, green, and black are used for different sections. - Blue: Represents MAG content. - Green: Customer-supplied content. - The colors help in distinguishing different parts and materials, aiding in better understanding and visualization. ### 10. **Perspective and Composition:** - **Image 1** is a top-down view of the manufacturing line, providing a detailed outline and layout. - The composition is structured with different parts of the manufacturing process laid out horizontally across the page, making it easier to follow the workflow. ### 12. **Graph and Trend Analysis:** - The diagram shows key trends in the manufacturing workflow and the specifics of the central coolant filtration process, with designated operational points and material classifications. ### 13. **Graph Numbers:** - Data points for the manufacturing line include: - Total cycle time: `75s` - Total volume: `22,000 QE` - Date: `18.09.2024` ### **Additional Aspects:** - **Ablaufprozesse (Process Flows):** - The diagram illustrates the process flows in a manufacturing line, showing the progression through different operational points. - **Prozessbeschreibungen (Process Descriptions):** - The processes described include various stages of the manufacturing line, coolant filtration, and the specifics of each operational point. - **Typen Bezeichnung (Type Designations):** - Designations include: - OP 10: SPERDIT SDQUIZO LIMOD - OP 20: SPERDIT SDQULO LIMOD AF-AEH - OP 30: SPERDIT SDQULO LIMOD AF-AEH HSK 100, WE These detailed analyses provide a comprehensive understanding of the visual content and its implications in the context of a manufacturing process for Skoda SSP MGH. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 6 Context: # Lieferumfang ## MAG Umfang ### Linie 1 - Portal mit H-Lader und 2 Doppelgreifern - Greiferfenster im Doppelgreifer einzeln ansteuerbar (Transport 1 Teil möglich) - Nassenbearbeitung - Kühlachse vor Ablegen WST auf FT-Band - SSP Schubladen mit DMC-Handelser (1 pro) - 2 PMC-Kameras am RT-Band - Schnittstelle zu Kundenrechner - Job (0) ist geloggt, elektrisch abgeschaltet - Keine Teststelle bei MAG in EIS - Virtuelle IBN - Option - 1 Woche Produktionsbegleitung - Schulungspaket ### Linie 2 - Option als Duplikat - Termin unbekannt ## Skoda Umfang - RT/FT Paletten-Bänder - Schutzhausaung für Bänder Image Analysis: Let's break down the content of the provided image based on the specified aspects. ### 1. Localization and Attribution: - **Image Number**: 1. - **Location**: The image is centered on a slide/page, with textual information on the right side and a diagram on the left side. ### 2. Object Detection and Classification: - **Diagram**: There is a technical diagram, likely an engineering or manufacturing layout, depicting machinery and workflow. - **Text Blocks**: Several bullet points to the right side of the diagram, describing various features and specifications. ### 3. Scene and Activity Analysis: - **Scene Description**: The scene appears to be a technical presentation slide detailing equipment and processes for a manufacturing system. - **Activities**: The text describes the setup and capabilities of different lines and machines in a manufacturing process. ### 4. Text Analysis: - **Detected Text**: - "Lieferumfang" at the top, which means "Scope of Delivery." - Descriptions of various components and their functionalities under "MAG Umfang," "Linie 1," "Linie 2," and "Skoda Umfang." - Specific details about machine parts, operations, and options available. - **Significance**: The text provides a detailed explanation of the manufacturing equipment and processes depicted in the diagram. This is crucial for understanding the technical specifications and capabilities of the system. ### 5. Diagram and Chart Analysis: - **Diagram Details**: - Title: Not explicitly given, but contextually it is related to "Lieferumfang" or "Scope of Delivery." - Depicts machinery and processes, possibly showing a production layout or flow. - Key elements include double grippers, H-loader, cameras, cooling stations, and more, as indicated in the text description. - **Key Insights**: The diagram visually supports the text by illustrating the physical setup of the described equipment and processes. ### 6. Product Analysis: - **Described Products**: Includes H-loaders, double grippers, cooling stations, cameras, pallet bands, and protective housing for bands. - **Details**: - Functionality and purpose of each component, such as handling and processing tasks in production. - Options for additional features and production support. ### 7. Anomaly Detection: - **Unusual Elements**: None detected. The image appears standard for a technical presentation slide. ### 8. Color Analysis: - **Dominant Colors**: Light green and blue tones in the diagram, with black and blue text. These colors are typically used for clarity and emphasis in technical documents. - **Impact on Perception**: The light colors in the diagram help in distinguishing different components, while the text color emphasizes readability. ### 9. Perspective and Composition: - **Perspective**: The diagram is presented in a straightforward, plan-view layout common in technical drawings. - **Composition**: The diagram is on the left and text on the right, suggesting that the diagram supports or illustrates the textual content. ### 10. Contextual Significance: - **Overall Context**: The image is likely part of a larger technical document, a presentation for engineering, manufacturing, or process planning. - **Contribution to Message**: The combination of diagram and text provides comprehensive information about the equipment and processes, supporting technical understanding and decision-making. ### 11. Metadata Analysis: - **Detected Metadata**: - Slide title: "Skoda SSP MGH Automation" - Date: 18.09.2024. - **Contribution**: This information indicates the image's relevance and up-to-date context for the specified technical content. ### 13. Graph Numbers: - **Data Points**: Not applicable, no specific graph data points provided. ### Additional Aspects: #### Ablaufprozesse (Process Flows): - **Description**: The flow within the diagram shows the progression of materials and operations through various stages of the machinery. #### Prozessbeschreibungen (Process Descriptions): - **Details**: - Descriptions under MAG, Linie 1, Linie 2, and Skoda outline process steps and equipment functionalities in detail. ### Summary: The image is a technical slide detailing equipment and processes in a manufacturing setup. It combines a technical diagram with descriptive text to give a comprehensive overview of machinery components, their functionalities, and options. The layout and composition ensure clarity and support for technical decision-making. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 7 Context: # Portal Daten ## Portal Daten **Horizontal** - Vxmin = 3.5 m/s - axmin = 3 m/s² **Vertikal** - Vmaxin = 1.5 m/s - azmin = 3 m/s² ## Werkstückwechselzeiten | Typ | Zeit | |-----------------|---------------------| | OP10 | < 23s - siehe Ref-Wechsel-Video VW KS Perf | | OP20/30 | < 18s | | SPECHT 500 DUO | Spindelstand (Werkstückstand) | - **Überfahrhöhe**: xxx - **Bandhöhe**: ca. 1.000 mm Referenz: VW KS MGH Perf OP10 18.09.2024 Image Analysis: ### Image Analysis #### Localization and Attribution 1. **Image 1** - Position: Left side of the page - Mainly text-based content with portaldaten, werkstückwechselzeiten, and other data. 2. **Image 2** - Position: Right side of the page - A visual image depicting some mechanical components or parts. #### Object Detection and Classification - **Image 2** - Objects: Mechanical components, possibly parts of a machine or industrial equipment. - Key Features: Metallic appearance, intricate parts (likely components of a larger industrial machine). #### Scene and Activity Analysis - **Image 1** - Scene: Textual data presentation. - Activities: Presentation of information such as portaldaten and werkstückwechselzeiten. - **Image 2** - Scene: Industrial setting, likely a machinery workshop or manufacturing plant. - Activities: Display of mechanical parts, possibly indicating assembly or engineering processes. #### Text Analysis - **Image 1** - Detected text: - "Portaldaten" Horizontal: Vxmin= 3,5 m/s, azmin= 3 m/s² Vertikal: Vxmin= 1,5 m/s, azmin= 3 m/s² - "Werkstückwechselzeiten" OP10: <23s – siehe Ref-Wechsel-Video VW KS Perf OP20/30: <18s SPECHT 500 DUO: <20s - "Spindelabstand (Werkstückabstand)" xxx Bandhöhe ca. 1.000mm - **Analysis**: - The text presents operational data for machines. It describes portal speeds (both horizontal and vertical) and the times for workpiece changes in different operations. - This data is crucial for understanding the efficiency and capabilities of the machinery depicted. #### Color Analysis - **Image 1** - Dominant Colors: White background with green and blue text. - Impact: Gives a clean, professional appearance suitable for technical data presentation. - **Image 2** - Dominant Colors: Metallic gray and white. - Impact: Highlights the industrial and mechanical nature of the content. #### Perspective and Composition - **Image 1** - Perspective: Front-facing, typical for text presentation. - Composition: Text is left-aligned and followed a clear format highlighting important data points. - **Image 2** - Perspective: Slight angle from the side, focusing on the mechanical parts. - Composition: The mechanical parts are centrally located, drawing attention directly to the machinery. #### Contextual Significance - The overall document appears to be a technical presentation or report, likely focused on machinery automation and performance data. - The image with mechanical components supports the textual data, providing a visual reference to the discussed machinery. #### Diagram and Chart Analysis - No diagrams or charts detected. #### Tables - No tables detected. ### Summary In this particular content: - **Text Analysis** provides critical operational and performance data for machines. - **Object Detection and Classification** emphasize industrial machinery. - **Scene and Activity Analysis** situates the content within a manufacturing or industrial context. - **Color Analysis**, **Perspective and Composition**, and **Contextual Significance** categories collectively showcase an organized, professional approach to presenting technical material. This combined analysis helps convey important technical information effectively, using both textual and visual elements to ensure comprehension from various perspectives. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt.pptx Page: 8 Context: # Werkstücklagen ## WST Lage auf RT-Band - Seite 3 oben - Seite 5 rechts Werkstückabstand: 710 mm ## WST Lage auf FT-Band - Seite 3 oben - Seite 5 rechts Werkstückabstand: 710 mm | | OP10 | OP20/3 | |------|------|--------| | | | | | | | | 18.09.2024 Skoda SSP MGH Automation VDF Boehringer Image Analysis: ### Comprehensive Examination of the Visual Content: #### 1. Localization and Attribution - **Image 1**: Top-left side includes a grayscale picture of an engine or a similar machinery part. - **Image 2**: Directly below Image 1, another grayscale picture of an engine or similar machinery part. - **Image 3**: The central part consists of a detailed schematic diagram showing machinery components and their arrangement on a production line. - **Image 4**: Bottom-left, a section with labeled stations "OP10". - **Image 5**: Center-bottom, a section labeled "OP20/30". - **Image 6**: Bottom-right side, a detailed graphic showing two machinery parts connected or near each other. #### 2. Object Detection and Classification - **Image 1**: Machinery Part (likely an engine block), characterized by a complex structure with identifiable mechanical elements. - **Image 2**: Similar Machinery Part with intricate details, resembling an engine block or heavy mechanical component. - **Image 3**: Multiple Machinery Components on an Assembly Line, identified by stations and mechanical parts. - **Image 4**: Diagram of an OP10 station, showing machinery components and their expected positions. - **Image 5**: Diagram of an OP20/30 station, highlighting additional mechanical assemblies. - **Image 6**: Connected Machinery Parts or components, exhibiting detailed features and connection points. #### 3. Scene and Activity Analysis - **Image 1 and 2**: Static images of machinery parts, no active processes. - **Image 3**: Represents an assembly line process. It shows a sequential arrangement of parts along the line with operators or automated systems assembling machinery parts. - **Image 4 and 5**: Represent specific sub-stations within an assembly line, detailing positions and steps for machinery part assembly. - **Image 6**: Focuses on two machinery parts and their interaction or connection, likely part of a larger process of machinery assembly. #### 4. Text Analysis - **Highlighted Text**: - "Werkstücklagen" (translated as "Workpiece Positions") - "WST Lage auf RT-Band" indicates positions on running bands with specific instructions for Page 3 (top and right side, 710mm workpiece distance). - "WST Lage auf FT-Band" provides similar instructions for another band with specific page references. - Identifiable station labels such as "OP10" and "OP20/30", meaning specific operational steps in the production line. #### 5. Diagram and Chart Analysis - **Central Diagram (Image 3)**: - Likely showing an automation line. - **Axes**: Length of the production line (horizontal) and height or different stages (vertical). - **Key Insights**: Step-by-step layout of machinery assembly. Positions marked help in accurate placement and movements within the production process. #### 6. Product Analysis - **Machinery Parts**: - Likely engine components. - Made of metal (typical gray-scale representation), detailed cavities, bolt positions, and connection points evident. - **Color**: Grayscale for machinery parts, with some operational station diagrams in blue and green, indicating different process zones. #### 7. Anomaly Detection - No significant anomalies or unusual elements detected in the schematics or machinery diagrams. All components fit a typical industrial machinery assembly context. #### 8. Color Analysis - **Dominant Colors**: Grayscale machinery parts indicating metal. - **Station Diagrams**: Blue and green, used to differentiate various sections and operational zones. #### 9. Perspective and Composition - **Perspective of Machinery Parts**: Front elevation and side views for detailed examination. - **Diagram Composition**: Logical progression from left to right, illustrating the sequence of the assembly line. - **OP10 and OP20/30** compositions provide detailed boundary boxes for parts placement. #### 10. Contextual Significance - **Overall Document**: This visual content likely pertains to a manufacturing or industrial automation guide, emphasizing workpiece positions and assembly steps. - **Contribution to Message**: Provides technical details essential for accurate industrial machinery assembly and positioning, aiding in efficient workflow management. #### 13. Graph Numbers - **OP10 and OP20/30 Sections**: - Include positional coordinates or measurements for parts placement (e.g., 710mm workpiece distance), vital for process precision. #### Additional Aspects: - **Typen Bezeichnung (Type Designations)**: - OP10, OP20/30: Specific operational stages in the machinery assembly process. - **Prozessbeschreibungen (Process Descriptions)**: - Detailed views of workpiece positioning and operational steps in a manufacturing line. The document provides essential procedural guidance to industrial workers or engineers. This comprehensive analysis identifies and describes key aspects of the provided visual content, focusing on its relevance to industrial automation processes. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 1 Context: # TECHNICKÉ ZADÁNÍ ## LASTENHEFT ### Lastenheft-Gegenstand **Version vom 23. 08. 2024** **Bearbeitungslinie für Motorgehäuse für Elektroantrieb SSP** --- | Vypracoval | Oddělení | Datum | Podpis | | |------------|----------|-------|--------|------| | G. Komarov | PPK-E | | | | | Schválení | Oddělení | Datum | Podpis | | |-----------|----------|-------|--------|------| | R. Taneček | PPK-E | | | | | Z. Nekola | PPK | | | | | J. Paldus | PKG/1 | | | | | R. Schrom | PKG/4 | | | | | M. Kargl | PKT/42 | | | | | M. Adamec | PKG/3 | | | | | J. Johan | PKT/3 | | | | | Z. Chytka | PKT/14 | | | | | K. Tkášek | PKT/1 | | | | | J. Cikler | GQH-1/4 | | | | | M. Repš | GQH-3 | | | | | J. Beneš | PKT/2 | | | | | M. Janata | PSZ/11 | | | | | R. Chudoba | PKT | | | | | J. Nohej | PSU | | | | --- **INTERNAL** 1/10 Image Analysis: ### Comprehensive Examination of the Image ### 1. Localization and Attribution: - **Image 1:** This is the single image provided for analysis. ### 2. Object Detection and Classification: - **Objects Detected:** - Text blocks - Tables - Organizational logos - Highlighted text ### 3. Scene and Activity Analysis: - **Scene:** - The image appears to be the first page of a technical document. - The document header contains information about a project, including codes, dates, and contact information. - Below the header is the main title of the document. - The text highlights a version date in yellow. - There is a table listing individuals and their signatures, department, and date. ### 4. Text Analysis: - **Detected Text:** - **Header:** - Project Information: "LH-Gegenstand" - Task: "Bearbeitungslinie für Motorgehäuse für Elektroantrieb SSP" - Project Responsible: "G. Komarov" - Version Date: "23. 08. 2024" - Contact Information: "Telefon +420 78863527, +421905 14752" - **Title:** - Main Title: "TECHNICKÉ ZADÁNÍ" - Subtitle: "LASTENHEFT" - Section Title: "Lastenheft-Gegenstand" - Document Title: "Bearbeitungslinie für Motorgehäuse für Elektroantrieb SSP" - **Table:** - Header: "Vypracoval Erarbeitet", "Oddělení Abteilung", "Datum", "Podpis Unterschrift" - Name Entries: "G. Komarov", "R. Taneček", "Z. Nekola", etc. - Department Entries: "PPK-E", "PPK", "PKG/1", etc. - **Significance:** - **Header Information:** Provides project context and contact details. - **Version Date:** Indicates the current version of the document, important for version control. - **Document Titles:** Define the scope and purpose of the document. - **Table Entries:** Show the distribution of responsibility and approval process for the document contents. ### 7. Anomaly Detection: - **Unusual Elements:** - There is noticeable yellow highlighting on the version date, drawing attention to version control. ### 8. Color Analysis: - **Color Composition:** - Dominant colors are black and white. - Yellow is used for highlighting the version date, indicating its importance. ### 9. Perspective and Composition: - **Perspective:** - The image was taken from a standard, straight-on perspective, typical for documents. - **Composition:** - Structured with clear sections: header, title, table. ### 14. Trend and Interpretation: - **Highlight Trend:** - The use of color to draw attention to crucial details (like version dates) is a common technique in documentation for easy identification. ### Abschluss: The image presents a structured, professional document with clear segregation of information. Key details such as project scope, version date, and responsible individuals are highlighted for clarity. The color usage is minimalistic but effective in drawing attention to critical information. The detailed table provides transparency in the approval and responsibility distribution across different individuals and departments. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 2 Context: # 1. Vergegenstand Bearbeitungslinie für Motorgehäuse für Elektroantrieb SSP. ## 2. Angaben über das zu bearbeitende Bauteil **Bauteil:** Motorgehäuse SSP HA LK3.4 **Zeichnungsnummer:** QOA.901.108 **Gewicht des bearbeiteten Teils:** 14,975 kg (davon die Lagerbuchse 0,369 kg) **Rohtleidgewicht:** ca 18 kg **Material:** Gehäuse QOA 901 108 EN A6 – 46000 – AISi9Cu3 (Fe) **Lagerbuchse:** QOA 901 261 A DIN 30910-SINT-D-11 **Grundmaße:** siehe Zeichnung ## 3. Geforderte Anlagenfunktionen 3.1. Bearbeitung des Gussteils gemäß der Zeichnung QOA_901_108-sstpha_mg_ftz (siehe Anlage Nr. 8). 3.2. Eingangsstand des Teils – Gussteil (Hochdruckguss) – siehe 3D Daten (Anlage Nr. 7). Die Zeichnung des Gussteils ist noch nicht verfügbar und wird später erstellt. Allgemein kann man mit den Toleranzen des Gussteils nach ISO 8062-3 - DCTG7 - GCTG3 rechnen. 3.3. Ausgangsstand des Teils – bearbeitetes Teil – siehe Zeichnung (Anlage Nr. 8). 3.4. Das Prozessablaufschema und der Lieferumfang siehe Anlage 5. ## 4. Forderungen auf die Anlagenausführung 4.1. Modulare Linie der Bearbeitungszentren, verkettet durch ein Portal. Die Bearbeitungszentren (Module) und das Portal werden schrittweise nach dem Zeitplan gebaut – siehe Punkt Nr. 7. 4.2. Die Linie soll über SPC-Stellen verfügen, damit die Teile nach jeder Arbeitsfolge zur Messung entnommen und wieder in den Strom eingelegt werden können. 4.3. Der Transport des Teils zum Übergebepunkt unter dem Portal erfolgt über ein Förderband mit Spannvorrichtungen. Positionierung des Teils auf der Transportvorrichtung gemäß den Empfehlungen des Lieferanten der Linie und den technischen Möglichkeiten des Verkehrslieferanten. ### Die Schnittstelle zwischen der ML und der Verkettung vor und nach der Linie: - **Ladevorrichtung** – im Lieferumfang des Lieferanten der ML - **Förderer** – im Lieferumfang Škoda Auto a.s. ![Diagramm](link-zum-bild) Image Analysis: ### Analysis of the Visual Content #### **Localization and Attribution:** - There is one page in the document. - The page contains multiple elements including text and one diagram. #### **Text Analysis:** 1. **Document Header Information:** - **Title:** "Bearbeitungslinie für Motorgehäuse für Elektronatrieb SSP" (Processing line for motor housings for electric drive SSP) - **Project Information:** Includes project identifier codes (P3C-K Finanzun voštly poskiavenat) and contact information. - **Contact Details:** Two phone numbers are provided. 2. **Main Sections and Headlines:** - **1. Vergabegegenstand:** Description of the project task, which involves the processing line for motor housings for electric drive SSP. - **2. Angaben über das zu bearbeitende Bauteil:** Information about the component to be processed: - **Bauteil:** Motor housing SSP HA LK3,4 - **Zeichnungsnummer:** QOA.901.108 (Drawing number) - **Gewicht des bearbeiteten Teils:** 14.975 kg (Weight of the processed part) - **Material:** Gh Gehäuse QOA 901 108 - **3. Geforderte Anlagenfunktionen:** Required system functions for the processing line focused primarily on the handling of cast parts according to specific drawings and standards. - **4. Forderungen auf die Anlagenausführung:** Requirements for the plant setup, including modular lines and transport systems. 3. **Highlighted Text:** - **Yellow Highlight:** Important steps involving the processing centers (modules) and the portal, which must be built according to a schedule. - **Green Highlight:** "Ladevorrichtung – im Lieferumfang des Lieferanten der ML" (Loading device – within the scope of supply of the supplier of the ML) - **Orange Highlight:** "Förderer – im Lieferumfang Škoda Auto a.s." (Conveyor – within the scope of supply of Škoda Auto a.s.) #### **Diagram and Chart Analysis:** - **Diagram:** - The diagram appears to be a layout of the processing line, showing different stations and modules. - **Legend:** - Yellow blocks represent items in the supplier's scope (Ladevorrichtung). - Green blocks represent items in Škoda Auto a.s.'s scope (Förderer). #### **Color Analysis:** - **Dominant Colors:** - The dominant text colors are black and grey. - The highlighted areas appear in yellow, green, and orange, drawing attention to critical information. - **Impact:** - The highlighted colors are used effectively to direct attention to key procedural steps and roles. #### **Perspective and Composition:** - **Perspective:** - The diagram is presented in a 2D layout plan view. - **Composition:** - The page is organized into sections with headings and respective content, facilitating a clear and logical flow of information. - The diagram is centrally placed under the relevant section to visually support the textual content. #### **Contextual Significance:** - **Overall Significance:** - The document appears to be a technical specification or project outline detailing the requirements and setup of a processing line for motor housings. - The highlighted sections and diagrams aid in understanding the critical aspects of the project execution. ### Summary The visual content primarily consists of a structured technical document outlining the project requirements for a processing line for motor housings. It includes key textual information, data on the parts, and a diagram illustrating the layout and modules involved. Highlighted colors emphasize critical aspects related to procedural steps and responsibilities. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 3 Context: # Bearbeitungslinie für Motorgehäuse für Elektromotoren SSP **4.4** Die Bearbeitung (der ganze Prozess) wird mittels Kühlflüssigkeit (Emulsion) bevorzugt und empfohlen - Spezifikation der Emulsion nach Škoda ## 4.4.1 Preisgestaltung der Schnittstelle mit der Emulsionszentrale (Lieferung der Emulsionszentrale seitens Škoda Auto a.s.) **Spezifikation der erforderlichen Emulsionsmenge (l/min)** | | BAZ | BAZ | BAZ | BAZ | BAZ | |----|-----|-----|-----|-----|-----| | KSS| | | | | | - im Lieferumfang des Lieferanten - im Lieferumfang Škoda Auto a.s. ## 4.4.2 OPTION zu jeder Maschine die Filtrieranlage und Temperieremulsion + Spänetransport mittels Förderer anbieten (Höhe des Späneträgers 1.500 mm) | | BAZ | BAZ | BAZ | BAZ | BAZ | |----|-----|-----|-----|-----|-----| | KSS| | | | | | - im Lieferumfang des Lieferanten - im Lieferumfang Škoda Auto a.s. **4.5 OPTION die Variante der Kombination MMS und KSS anbieten** ### 4.5.1 Operation Vorbehandlung: - Es wird die Minimalmischrechnologie (MMS/MQL) eingesetzt - Spänetransport mittels Förderer (Höhe des Späneträgers 1.500 mm) ### 4.5.2 Operation Feinbearbeitung: - unter Kühlflüssigkeit (für jedes Zentrum eine Anlage zum Filtrieren und Temperieren der Emulsion anbieten) - Spänetransport mittels Förderer (Höhe des Späneträgers 1.500 mm) Image Analysis: **1. Localization and Attribution:** - **Image 1:** - Positioned at the top of the page. - Number assigned: Image 1. - **Image 2:** - Positioned in the middle of the page. - Number assigned: Image 2. 3. **Scene and Activity Analysis:** - **Image 1:** - Scene: This image depicts a diagram indicating "Spezifikation der erforderlichen Emulsionsmenge (l/min)" for different processes within a centralized emulsion location. - Activities: The diagram outlines the distribution and quantity of emulsion required. - **Image 2:** - Scene: This image presents another diagram, depicting a combination of MMS and KSS for different operations, with specifications for both systems under "Operation Feinbearbeitung". - Activities: The flow and distribution of the emulsion and transport heights for spanner trays are outlined. 4. **Text Analysis:** - **Image 1:** - Text Detected: "Spezifikation der erforderlichen Emulsionsmenge (l/min)" - Content Analysis: Details the required emulsion quantity in liters per minute for various sections designated in blue and grey. - **Image 2:** - Text Detected: "MMS Erstschnitt KSS Feinbearbeitung" - Content Analysis: Specifies the operation preparation and finish, highlighting the use of minimal lubrication technology and coolants in the process. 5. **Diagram and Chart Analysis:** - **Image 1:** - Data: Shows emulsion distribution across "BAZ L" and "BAZ R" systems. - Key Insight: Specifies emulsion levels for each section while indicating different entities involved in receiving the supply. - **Image 2:** - Data: Illustrates two operations—preparation (Erstschnitt) and fine processing (Feinbearbeitung)—with corresponding emulsion requirements. - Key Insight: Emphasizes the combined usage of MMS and KSS technologies, targeting efficiency and spanner transport systems. 13. **Graph Numbers:** - **Image 1:** - Each section is labeled with specific emulsion amounts; however, exact numerical values may need extraction or further clarification from a high-quality image to capture the text precisely if not clear at this scale. - **Image 2:** - Similar detailing as Image 1 with further emphasis on operational stages requiring identical numeric analysis for precise emulsion and transport values. **Additional Aspects to Include:** - **Prozessbeschreibungen (Process Descriptions):** - **Image 1:** Detailed process descriptions for centralized emulsion distribution ensuring optimized supply for various operational setups. - **Image 2:** Elaborate on specific processes using the combination of MMS and KSS technologies to enhance precision, efficiency, and overall performance. - **Typen Bezeichnung (Type Designations):** - Identification of machine types, BAZ L and BAZ R, and specific designations for the emulsion supply systems. **Annotations:** - The diagrams collectively deliver a comprehensive view of operational precision and fluid requirements, focusing on advanced lubrication and cooling systems pivotal for high-efficiency mechanical processes. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 4 Context: # 4.6 Die Maschinen sollen für den Anschluss von der oberen Seite an die Absaug- und Filtrationsanlage vorbereitet sein. Die Absaug- und Filtrationsanlage richtet sich zum Lieferumfang und wird von ŠKODA AUTO AG geliefert. Festlegung erforderlicher Leistung / Menge der Abluft (m³/h). ## 4.7 OPTION die Absaugung und Filtration inkl. Rohrleitung anbieten. ## 4.8 Abnahme nach TGS 02.09 und VVV 101 30 – siehe Anlagen Nr. 10 und 11. ## 4.9 Erforderliches Spannungsschiene siehe Anlage Nr. 14. ## 4.10 Steuerung Siemens – Anforderungen für Steuerung siehe Anlage Nr. 6. ## 4.11 Am Anfang der ML müssen sich 2 stationäre Kameras zum Lesen von DMC-Codes von Teilen befinden, ein manuelles DMC-Lesegerät an jedem SPC Standard. # 5. Weitere Anforderungen 5.1 Bestimmen Sie den kürzestmöglichen Liefertermin von 50 bearbeiteten und gemessenen Mustern, die der technischen Dokumentation entsprechen, ab dem Zeitpunkt der Bestellung des Auftraggegendstandes. Veranlassung des Terminsplans für die Zustellung von Mustern und diese in einem separaten Posten preisgestalten. 5.2 OPTION Werkzeug für 1 Maschine/OP nach ITS 3.10. 5.3 OPTION Unterstützung nach Übergabe der Inbetriebnahme im Umfang von 1 Arbeiter/1 Woche anbieten. 5.4 OPTION Schulung anbieten. 5.5 Abschätzung der Standzeit von Werkzeugen und Kosten pro Stück für die Lagerbuchsenbearbeitungswerkzeuge. # 6. Forderungen auf die Anlagenleistung | Parameter | Wert | |------------------------------------|----------------------| | Kapazität | 232 000 Stck./Jahr | | Taktzeit der ML | 75 s | | Tägliche Arbeitszeit | 22,5 Std. | | Arbeitstage pro Jahr | 250 Tage | | Technische Verfügbarkeit | 86% | | Ausschussquote | 0% | | Prozessstabilität – bewertete Parameter | Siehe ITS ŠKODA Auto Standards | | OPTION - 2. ML mit gleicher Kapazität siehe Layout in der Anlage Nr. 3 | # 7. Terminplan | Activity | 2024 | 2025 | 2026 | |-----------------------------------|---------|---------|--------| | Bestellungen | 01/25 | A 14/26 | | | Lieferung, Inbetriebnahme und Übergabe | A 18/26 | A 27/26 | | | TBT-PVS | | | | | PVS | | | | | Nullierung | | | | | 2 Tage Produktion | 05/27 | | | | SOP | 07/27 | 11/27 | | Image Analysis: ### Comprehensive Examination of the Visual Content #### 1. Localization and Attribution 1. **Localization and Attribution**: - **Image 1**: Positioned occupying the full width on the top section of the page. - **Image 2**: A table positioned in the middle section of the page. - **Image 3**: A timeline chart located at the bottom section of the page. #### 2. Object Detection and Classification **Image 1**: - **Objects**: Text, numbered items, logos, headers. - **Categories**: Textual content and graphical elements. - **Key Features**: The image primarily consists of a numbered list (4.6 to 4.11), with highlighted text in yellow. **Image 2**: - **Objects**: Table with rows and columns of text/numbers. - **Categories**: Table data, including categories such as capacity, takt time, daily working time, etc. - **Key Features**: Key data points such as 'Kapazität' and 'Taktzeit der ML' are outlined. **Image 3**: - **Objects**: Timeline chart with activities labeled along with a time axis. - **Categories**: Activity schedule chart. - **Key Features**: The chart displays a timeline from 2024 to 2027, with specific activities marked along different time points. #### 3. Scene and Activity Analysis **Image 1**: - **Scene**: A continuation of a procedural or requirement document. - **Activities**: Listing of equipment and operational specifications. - **Main Actors**: Equipment (e.g., 'TGS 02.09 und VW 101 30') and operations (e.g., absorption, filtration). **Image 3**: - **Scene**: A project management or scheduling chart. - **Activities**: Outlining various project milestones over time. - **Main Actors**: Activities related to deliveries, start-up, and operation shifts. #### 4. Text Analysis **Image 1**: - **Text**: Procedural steps and technical requirements. - **Significance**: Defines specific equipment requirements and operational procedures, critical for ensuring compliance and operational efficiency in a manufacturing context. **Image 2**: - **Text**: - Kapazität: 232 000 Stck./Jahr - Taktzeit der ML: 75 s - Tägliche Arbeitszeit: 22,5 Std. - Arbeitstage pro Jahr: 250 Tage - Technische Verwendbarkeit: 86% - Ausschussquote: 0% - **Significance**: Provides technical specifications and operational parameters necessary for manufacturing productivity. **Image 3**: - **Text**: - Activity List (e.g., Bestellungen, Lieferung, etc.) - Timeline from 2024 to 2027 with specific dates marked. - **Significance**: Essential for project planning and ensuring all project phases are completed on schedule. #### 6. Product Analysis **Image 2**: Describes the system's capacity and parameters crucial for ensuring manufacturing systems operate within specifications to maximize productivity and minimize waste. #### 7. Anomaly Detection **Image 2**: - **Anomaly**: No major anomalies detected. The data is structured and logically organized. #### 10. Contextual Significance **Image 1**: - **Context**: Detailed operational requirements are crucial for ensuring proper equipment setup and operation within the logical flow of the document. The detailed instructions and options highlighted in yellow suggest important action points. **Image 3**: - **Context**: Scheduling and project management information crucial for systematic project execution. This contributes significantly to planning and tracking progress over time. #### 12. Graph and Trend Analysis **Image 3**: - **Trends**: Depicts phases of activities and milestones spaced out chronologically. Key milestones such as project starts, delivery dates, and completion markers provide a clear roadmap. - **Interpretation**: Highlights the systematic progression of projects over the years with specific pivotal dates for various operational activities. #### 13. Graph Numbers **Image 3**: - **Data Points**: Table of activities and respective timelines for 2024-2027: - Lieferung, Inbetriebnahme und Übergabe: A - 01/25 - 1xBAZ Pro OP + komplette Automatisierung: A - 14/26 - TBT-PVS: A - 18/26 - PVS: A - 27/26 - Nullserie: A - 47/26 - Lieferung, Inbetriebnahme und Übergabe getestet BAZ für erforderliche Kapazität: A - 05/27 - 2 Tage Produktion: A - 07/27 - SOP: A - 11/27 By comprehensively covering each specified aspect, the examination of the visual content provides a detailed understanding of the document’s structure, its technical requirements, timelines, and operational parameters critical to the manufacturing and project management processes. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 5 Context: ```markdown # 8. Sonstiges - Sämtliche betriebstechnischen Parameter müssen die Betriebsvorschriften ITS Škoda Auto sowie die Sicherheitsnormen CSN erfüllen. - Der Lieferant hat alle Konstruktionen und technischen Lösungen noch vor dem Beginn der Herstellung mit den Fachbereichen ŠKODA AUTO AG zu konsultieren und genehmigen lassen. - Garantie mindestens 24 Monate im 3-Schicht-Betrieb. - Mit dem Angebot ist ein 2D-Layout in den Formaten PDF und DWG vorzulegen. - Baufundament, Medienanschlüsse bis zum Hauptverbraucher an der Grenze des Arbeitsplates stellt Škoda bereit. Die restlichen Vertailungen besorgt der Auftragnehmer. - Komplette Projektunterlagen wird der Lieferant 1 Monat nach Vertragsabschluss liefern. - Die erste Betriebsoffnung zum Schmiren der Anlage gehört zum Lieferumfang. - Das Werkzeug wird anhand der Unterlagen des Maschinenherstellers und der gegenseitigen Abstimmung von Škoda sichergestellt. - Dokumentation in tschechischer Sprache gemäß ITS ŠKODA (2 Ausdrücke + 1 digitale Form + Erklärung über den ordnungsgemäßen Erwerb von Softwarelizenzen). - Um einen Vertrag zu erhalten, ist eine Vertraulichkeitsvereinbarung (NDA-Vertrag mit ŠKODA AUTO AG) und eine entsprechende TISAX-Zertifizierung erforderlich. - Lieferbedingungen DDU DAP (einschließliche Zusammenlegung, Vermessung und Anbringung vor Ort). # 9. Anlagen 1. ITS/Betriebsmittelvorschriften ŠKODA AUTO a.s.: [ITS/Betriebsmittelvorschriften](https://its.volkswagen.de/one-kbp/content/es/kbp_private/information_1/divisions/procurement/terms_and_conditions_of_purchase/new_koda_auto_as_4/koda_auto_a_s.jsp) 2. Energie Škoda - separate Datei 3. Stiuerung in der Halle 4. Visualisierung der Teile, Grundmaße 5. Schema des technologischen Prozesses 6. Unterlage Solutions für Powertrain Volkswagen Group Components Global Differenzbeschreibung - per separate Datei 7. 3D Daten von Gussstück und des bearbeiteten Teils - werden per Ebox zugesandt 8. Zeichnungen des bearbeiteten Teiles - per separate Datei 9. Interne Richtlinie der Komponenten - per separate Datei 10. Norm TQS 02.09 - separate Datei 11. Norm VW 101 30 12. Norm WSK 016_862_G (Anforderungen zu Dichtungsflächen) 13. Kapazitätsanforderungen in Jahren 14. Erforderliches Schema der Spannung - separate Datei ``` Image Analysis: **Image Analysis** 1. **Localization and Attribution:** - The image is a single page document positioned centrally on the page. - Identified as Image 1. 2. **Text Analysis:** - The image features sections of text in German, numbered headings, and bullet points with detailed information. - Key sections highlighted in yellow for emphasis. **Text Analysis Details:** - **Headings:** - **8. Sonstiges (Miscellaneous):** This section outlines various technical parameters that must be adhered to, including safety standards, warranty details, documentation requirements, and delivery conditions. - **9. Anlagen (Attachments):** This section lists various types of attachment documents, links, and Norm references required. - **Highlighted parts include:** - "Das Werkzeug wird anhand der Unterlagen des Maschinenherstellers und der gegenseitigen Abstimmung von Skoda sichergestellt" (The tool is ensured based on the documents from the machine manufacturer and mutual agreement with Skoda). - "Dokumentation in tschechischer Sprache gemäß ITS ŠKODA" (Documentation in Czech language according to ITS ŠKODA). - Delivery conditions: "Lieferbedingungen DDU" (Delivery terms DDU) and "DAP (inklusiver Zusammenlegung, Vermessung und Anbringung vor Ort)" (DAP including consolidation, measurement, and on-site installation). - **Links:** - A URL is provided for terms and conditions of purchase for SKODA AUTO a.s. - **List of Attachments:** - The attachments include a variety of documents like technical norms (Normen), visualizations (Visualisierung), situating documents (Situierung), schematic processes (Schema des technologischen Prozesses), and documentation related to specific technical requirements and guidelines. **Current Segmentation and Analysis:** - **Bullet Points:** Expand upon specific responsibilities and processes, emphasizing construction, technical solutions, warranty, project documentation, and operational supplies. **Highlighted Sections (Color Analysis and Impact):** - The use of yellow highlights stresses important parts of the information. - Green-highlighted text emphasizes specific tools or processes essential for understanding technical documentation. **Contextual Significance:** - The document appears to be part of a technical manual or guideline related to the operational and documentation processes for SKODA AUTO, indicating operational standards and necessary compliances. This communicates thoroughness and emphasis on adhering to standards and regulatory requirements. **Perspective and Composition:** - The composition is straightforward, listing detailed instructions and hyperlinks in a structured format meant for clarity. - The highlighted sections ensure critical information stands out for quick reference. By examining these key details, it can be inferred that the document is vital for providing technical guidelines and ensuring compliance with industry standards and internal processes at SKODA AUTO. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 6 Context: # 10. Kontaktperson **Ing. Georgy Komarov, PPK-E – Plánování výroby polotovarů** ŠKODA AUTO a.s., tř. Václava Klementa 869, 293 01 Mladá Boleslav II, Czech Republic M: +420 730 865 237 [Georgy.Komarov@skoda-auto.cz](mailto:Georgy.Komarov@skoda-auto.cz), [www.skoda-auto.com](http://www.skoda-auto.com) --- **Ing. Roman Tanáček, PPK-E – Plánování výroby polotovarů** ŠKODA AUTO a.s., tř. Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic T: +420 326 8 14752, F: +420 326 8 17720, E: +420 326 8 45848, M: +420 604 292 729 [Roman.Tanecek@skoda-auto.cz](mailto:Roman.Tanecek@skoda-auto.cz), [www.skoda-auto.com](http://www.skoda-auto.com) Image Analysis: ### Image Analysis #### Text Analysis: **Image Number**: 1 1. **Detected Text and Significance**: - The text in the image provides contact information for two individuals associated with a company: - **Ing. Georgy Komarov, PPK-E – Plánování výroby polotovarů** - **Company:** ŠKODA AUTO a.s., tř. Václava Klementa 869, 293 01 Mladá Boleslav II, Czech Republic - **Phone:** M +420 730 865 237 - **Email:** Georgy.Komarov@skoda-auto.cz - **Website:** www.skoda-auto.com - **Ing. Roman Taneček, PPK-E – Plánování výroby polotovarů** - **Company:** ŠKODA AUTO a.s., tř. Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic - **Phone:** T +420 326 8 14752, F +420 326 8 17720, ef +420 326 8 45848, M +420 604 292 729 - **Email:** Roman.Tanecek@skoda-auto.cz - **Website:** www.skoda-auto.com - The text content is crucial for establishing contact with specific individuals related to the planning of the production of semi-finished products at ŠKODA AUTO. It offers detailed contact options including physical address, phone numbers, emails, and the website, which is essential for communication within a professional or business context. #### Localization and Attribution: - **Number of Images**: There is only 1 image described. - **Content Location**: The image predominantly features text with details aligned at the top left, right top, center, and bottom-left sections of the page. ### Contextual Significance: - The image is part of a larger document likely related to business procedures, organizational communication, or process documentation for ŠKODA AUTO. The contact details provided serve as a significant point of reference for stakeholders or team members needing to reach out to key personnel in the planning department of the production unit. ### Anomaly Detection: - No noticeable anomalies are present in the image. The text is straightforward and clear, with no unusual elements detected. ### Color Analysis: - **Dominant Colors**: - The text content is written in black on a white background. - There are some elements in orange and blue (email addresses and URLs). - These color choices ensure high readability and a professional appearance. ### Perspective and Composition: - **Perspective**: - The document is presented from a straight-on view, typical for official documents. - **Composition**: - Text is neatly organized, with headers properly formatted. - Contact information is clearly segmented, making it easy to locate and read specific details. ### Diagram and Chart Analysis: - There are no diagrams or charts in this image. ### Tables: - There are no tables in this image. ### Summary: The provided image is a section of a document containing contact information for key personnel at ŠKODA AUTO. The details are well-organized and provide essential communication lines for individuals involved in the planning and production departments. The clean and professional design enhances readability, ensuring the information is accessible and easily understood. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 7 Context: # Anlage Nr. 3 – Situierung in der Halle Die Bearbeitungslinie ist blau markiert. Voraussichtliche Maße der Bearbeitungslinie betragen ca. 15 m x 40 m. - **Projektnummer:** SSP - **Kunde:** Miele Bielefeld - **Projektleitung:** Konstruktionsleitung Tzankov - **Tel.:** +49 7368 62337 - **Tel.:** +49 152 384 14752 ## Übersicht der Bereiche | Bereich | Beschreibung | |--------------------------- |-----------------------------------| | AF50 Mechanische Bearbeitung | OPTION | | AF50 Mechanische Bearbeitung | | | AF55 Waschen | | | AF85 Endkontrolle | | | AF80 Leckstellen Stopen | Diesenmontage | | Automatische Palettierung | Verpacken und Entladung | | Automatisches Depalettieren | | ![Plan](your_image_url_here) Image Analysis: ### 1. Localization and Attribution: - The content comprises a single image detailing a floor plan diagram. For the purpose of this analysis, it will be referred to as **"Image 1."** ### 2. Object Detection and Classification: - **Objects Detected:** - **Machines/Workstations:** - **AF50 Mechanische Bearbeitung OPTION** - **AF50 Mechanische Bearbeitung** - **AF55 Waschen** - **AF85 Endkontrolle** - **AF80 Lecktesten Stopfen und Demontage** - **Depalletizing Area:** labeled "automatische Depalettierung" - **Palletizing Area:** labeled "Automatische Palettierung Verpacken und Umreifen" - **Conveyor Belts/Pipeline:** connecting the various workstations - **Shelving/Racks:** positioned at the edges, likely for storage - **An outline of a person or worker:** shown in a standing posture near the depalletizing area ### 3. Scene and Activity Analysis: - **Description of Scene:** - The image depicts a detailed layout of a manufacturing or assembly hall. - **Activities:** - **Mechanical Processing:** in areas labeled "Mechanische Bearbeitung" - **Washing Station:** designated as AF55 Waschen - **Testing:** AF80 Lecktesten for leakage testing - **Inspection or Final Check:** AF85 Endkontrolle - **Packaging and Palletizing:** areas for automatic operations ### 4. Text Analysis: - **Detected text:** - **Project Details and Contact Information:** - Listed in the upper left corner. Project Name, Project Number, Customer, etc. - **Title:** - "Anlage Nr. 3 – Situierung in der Halle" which translates to "System No. 3 - Location in the Hall" - **Description:** - "Die Bearbeitungslinie ist blau markiert. Voraussichtliche Maße der Bearbeitungslinie betragen ca. 15 m x 40 m." translates in brief to the processing line is highlighted in blue with an approximate size of 15 m x 40 m. ### 5. Diagram and Chart Analysis: - **Diagram Layout:** - A floor plan with different workstation sections designated by different colors. - **Axial Measurements:** - Length (~40m) and width (~15m) of the blue-marked processing line - **Data and Trends:** - The map represents a workflow from depalletizing to mechanical processing, washing, leak testing, final inspection, and packaging. ### 6. Product Analysis: - **Workstations and Machinery:** - Each colored section appears to contain specific machinery or stations tailored for different operations. - Blue areas show dense workstations likely indicative of high activity. ### 7. Anomaly Detection: - **Identified Anomalies:** - No significant anomalies detected. ### 8. Color Analysis: - **Dominant Colors:** - Blue: Represents the primary processing line. - Green: Represents washing stations. - Red: Represents final inspection. - Yellow: Depalletizing and palletizing areas. - **Impact:** - Color coding helps in quickly identifying different sections and understanding their function within the production flow. ### 9. Perspective and Composition: - **Perspective:** - Top-down view, commonly known as the bird’s eye view. - **Composition:** - The floor plan is well-organized with clearly defined areas showing a logical sequence in the workflow. ### 10. Contextual Significance: - **Overall Contribution:** - Provides a clear visual representation of the layout and workflow within a manufacturing hall, likely aiming to guide workers or illustrate process planning. ### 13. Graph Numbers: - **Graph Measurements:** - The processing line area dimensions: Length ~40m, Width ~15m. ### Additional Aspects: - **Ablaufprozesse (Process Flows):** - The diagram illustrates a sequential flow starting from depalletizing, followed by mechanical processing, washing, testing, final inspection, and palletizing. - **Prozessbeschreibungen (Process Descriptions):** - The detailed steps involved in each section are likely described internally within the company but are implied in the workflow chart. ### Summary: The provided image depicts a detailed and color-coded flow plan of a manufacturing hall designated for various stages of product processing, from the initial depalletizing stage to the final packaging and palletizing. The rich detail, clear text, and structured layout facilitate an easy understanding of the process flow and station functions. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 8 Context: # Anlage Nr. 4 – Visualisierung der Teile, Grundmaße ## Gusstück ![Gusstück](URL_TO_IMAGE) ### Maße - Höhe: 1534.680 mm - Breite: 468.850 mm - Länge: 569.681 mm ## Bearbeitetes Teil ![Bearbeitetes Teil](URL_TO_IMAGE) ### Maße - Höhe: 1532.232 mm - Breite: 492.705 mm - Länge: 569.681 mm --- **Projekt:** SSP **Mitglieder:** Milos Bulić **Klasse-Nr.:** HBSR6R2O4 **Dezernat:** 4313 324 **Teile:** - Tel.: +49 736896237 - +49 1528 14752 --- 8/10 INTERNAL Image Analysis: ### Analysis of the Visual Content #### 1. Localization and Attribution - **Image 1**: Located on the left side of the page. - **Image 2**: Located on the right side of the page. #### 2. Object Detection and Classification - **Image 1:** - **Object**: A car engine housing component. - **Key Features**: The object is detailed with various industrial elements, including bolt holes, and ridges. - **Image 2:** - **Object**: A modified or processed version of the car engine housing component in Image 1. - **Key Features**: Additional modifications highlighted in blue, showing areas that have been machined or altered. #### 3. Scene and Activity Analysis - **Image 1 (Gusstück)**: This image displays an unprocessed car engine housing part, providing a visual representation of the part before any machining or adjustments have been made. - **Image 2 (Bearbeitetes Teil)**: This image shows the same car engine housing part after it has been machined. The blue highlighted areas indicate areas that have been processed. #### 4. Text Analysis - **Image 1 & 2 Text**: - "Gusstück" (Left Image): Indicates the component in its raw or cast form. - "Bearbeitetes Teil" (Right Image): Indicates the component after machining. - Various dimensions are labeled in both images (e.g., 438.480 mm, 343.685 mm, 345.220 mm), highlighting critical measurements of the component in both its raw and machined states. #### 6. Product Analysis - **Product Description**: - **Material**: Likely metal, given the context of engine housing. - **Color**: Grey for the base part with blue highlights indicating machined areas in the processed component. - **Features**: The machined component has precise dimensions indicated with labels, compared to the raw cast component. - **Comparison**: - The primary differences between the raw and machined components are the blue-highlighted areas in the machined image, indicating the specific regions that have been processed. - Both show dimensions to provide an understanding of the size changes due to machining. #### 8. Color Analysis - The dominant color in both images is grey, typical of metal parts. The machined component features blue edges/highlights, indicating areas that have been processed. #### 9. Perspective and Composition - The images are presented in an isometric view, providing a three-dimensional perspective that allows for a detailed view of the complex geometries. - **Composition**: - Both components are centered in their respective frames. - The dimensions are clearly highlighted with colored lines and labels for clarity. ### Summary: This document page appears to be part of a technical manual or report detailing the specifications and modifications of an automotive engine housing component. The visualization contrasts the raw cast part with the machined version, highlighting key dimensions and areas of modification. The use of color and detailed labeling aids in understanding the extent and specific locations of the modifications. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 9 Context: # Anlage Nr. 5 – Schema des technologischen Prozesses ## Giessen - **AF2:** Schmelzen - **AF5:** Giessen inkl. Lagerbuchse - **AF20:** Strahlen - **AF50:** Fertigbearbeitung ## Endoperationen - **AF5:** Waschen - **AF80:** Lecktesten / Stopfen / Disemontage - **AF85:** Endkontrolle Die Anzahl der Bearbeitungszentren ist schematisch dargestellt. | | | |---|---| | Mimo rozsah dodávky | Rosah dodávky dle TZ | Image Analysis: ### 1. Localization and Attribution - **Image 1**: Identified and analyzed the single image present. ### 2. Object Detection and Classification - **Image 1**: Several rectangular blocks representing different phases in a technological process, dotted lines indicating optional processes, and arrows indicating the process flow. ### 4. Text Analysis - The image contains various labels corresponding to stages and operations within a technological process. - "Giessen" and "Endoperationen": indicating sections of the process. - Stages such as "AF2 Schmelzen" (melting), "AF5 Giessen inkl. Lagerbuchse" (casting including bearing bush), and more. - There is a note at the bottom: "Die Anzahl der Bearbeitungszentren ist schematisch dargestellt." This translates to "The number of processing centers is shown schematically." ### 5. Diagram and Chart Analysis - The image depicts a process flow chart for a technological process sequence. - The chart uses arrows to indicate the flow direction. - Boxes represent stages or operations, with some colored blue and others gray. - Legend: - Gray (Mimo zakresu dodávky) indicates items outside the scope of delivery. - Blue (Rozsah dodávky dle TZ) indicates items within the scope of delivery as per TZ. ### 8. Color Analysis - **Dominant Colors**: Gray and Blue. - Gray is used for most process stages, suggesting standard steps. - Blue highlights certain stages, which are relevant within the delivery scope as per TZ. ### 9. Perspective and Composition - **Perspective**: Top-down schematic view. - **Composition**: Linear arrangement from left to right, illustrating a sequence of operations. ### 10. Contextual Significance - The image is a schematic representation of a technological process pertinent to machining lines and related operations, contributing to the overall understanding of the process flow within a manufacturing or industrial project. ### 13. Graph Numbers - **Stages (translated)**: - AF2 Schmelzen (Melting) - AF5 Giessen inkl. Lagerbuchse (Casting including bearing bush) - AF20 Strahlen (Blasting) - AF50 Fertigbearbeitung (Finishing operations) - AF55 Waschen (Washing) - AF80 Imprägnierung (Impregnation) *[shown as an optional process]* - AF85 Endkontrolle (Final inspection) **Legend (translated)**: - Mimo rozsah dodávky: Outside the scope of supply - Rozsah dodávky dle TZ: The scope of supply according to TZ #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf Page: 10 Context: # Anlage Nr. 13 – Kapazitätsbedarf in Jahren | Jahr | Kapazität (KAPA 250AT) | Kapazität (KAPA 309AT) | Bedarf MGH | |------|-----------------------|------------------------|------------| | 2027 | 130.154 | | | | 2028 | 188.000 | | | | 2029 | 188.000 | | | | 2030 | 188.000 | | | | 2031 | 188.000 | | | | 2032 | 188.000 | | | | 2033 | 282.000 | | | | 2034 | 94.000 | | | **Kapazitätsbedarf**: - KAPA 250AT und KAPA 309AT - Ziel: 232.000 ### Legende - **KAPA 250AT**: --- - **KAPA 309AT**: --- - **Bedarf MGH**: --- Image Analysis: **Image Analysis** **Image Number: Image 1** 1. **Localization and Attribution:** - Single image presented on the page. 2. **Object Detection and Classification:** - Objects: Bar chart, line chart, text elements, and logos. - Categories: - Bar chart depicting capacity requirements over years. - Line chart overlaid illustrating capacity caps. - Text elements providing labels and values. - Logos in upper corners. 3. **Scene and Activity Analysis:** - The image depicts data visualization showing the capacity requirements over a series of years. - It is primarily focused on the capacity trends and predictions in an industrial context. 4. **Text Analysis:** - Various texts are detected: - Title: "Anlage Nr. 13 – Kapazitätsbedarf in Jahren" - Year labels on the x-axis ranging from 2027 to 2034. - Capacity values on the y-axis ranging from 0 to 300,000. - Specific capacity values for certain years, e.g., "130 154", "188 000", "282 000", and "94 000". - Labels "KAPA 250AT" and "KAPA 309AT". - Legend explaining the colors: Black for "Bedarf MGH". - Significance: These texts provide context and clarity to the data displayed in the chart, explaining the capacity requirements and the projected values over the given years. 5. **Graph and Trend Analysis:** - The graph shows a series of bars representing the capacity requirements (Bedarf MGH) annually from 2027 to 2034. - A red dashed line labeled "KAPA 309AT" and a solid red line labeled "KAPA 250AT" indicate different capacity limit thresholds. - The chart shows the following data points: - 2027: 130,154 - 2028-2032: Each has 188,000 - 2033: 282,000 - 2034: 94,000 - The trend indicates steady capacity requirements from 2028 to 2032, a sharp increase in 2033, and a notable decrease in 2034. - The significance of the 232,000 marker points out the exceeded capacity requirement in 2033 well above the normal threshold, highlighting potential capacity planning issues. 6. **Diagram and Chart Analysis:** - The diagram employs vertical bars to display data, with axes clearly marked. - The primary y-axis (left) measures capacity requirements from 0 to 300,000. - The secondary y-axis (right) corresponds to the same capacity range. - The x-axis represents the years from 2027 to 2034. - Key insights: - The requirements consistently meet the 188,000 mark for most years. - A significant peak is noted in 2033, going beyond the typical yearly requirements. - The decrease in 2034 below previous years' marks suggests fluctuating demands or operational changes. 7. **Trend and Interpretation:** - The primary trend shows steady annual capacity requirements with occasional peaks. - The 2033 peak may indicate an expected surge in demand or production that year, necessitating additional planning. - The lower requirement in 2034 could suggest optimization or decreased demand, possibly following the peak year. 8. **Tables:** - The data from the chart can be tabulated as follows: | Year | Capacity Requirement | |------|-----------------------| | 2027 | 130,154 | | 2028 | 188,000 | | 2029 | 188,000 | | 2030 | 188,000 | | 2031 | 188,000 | | 2032 | 188,000 | | 2033 | 282,000 | | 2034 | 94,000 | - This table succinctly presents the annual capacity needs, facilitating simple comparison and analysis. In conclusion, the image provides a comprehensive view of capacity requirements over an eight-year span, with notable peaks and troughs that are important for planning and resource allocation in an industrial context. #################### File: Standardanschreiben.pdf Page: 1 Context: Skoda AUTO a.s., Václava Klementa 869, 293 60 Mladá Boleslav Einkäufer: Michala Senkyrova Abteilung: Beschaffung Aggregatfertigung und Infrastruktur Telefon: E-Mail: Michala.Senkyrova@skoda-auto.cz Datum: 26.06.2024 --- **Anfrage-Nr:** SK 2024 001598 Sehr geehrte Damen und Herren, wir bitten Sie um Ihr für uns unverbindliches und kostenloses Angebot unter Zugrundelegung unserer nachstehenden aufgeführten Geschäftsbedingungen und unter Verwendung der beigefügten Unterlagen für: **Obráběcí linka motorové skříně MGH SSP / Machining line of the SSP E-drive motor box** Wir bitten um Einreichung Ihres Angebots über die Konzernbusinessplattform. Zuständig für technische Rückfragen ist **Vorname Nachname** **OE-Name** **OE-Kürzel** **Telefonnummer:** Georg.Komardov@skoda-auto.cz Es gelten die nachfolgend aufgeführten Geschäftsbedingungen: - Einkaufsbedingungen ŠKODA AUTO a.s. - Allgemeine Beschaffung (04/2024) Die aktuelle Fassung der Geschäftsbedingungen finden Sie auf [http://www.vwgroupsupply.com](http://www.vwgroupsupply.com) unter folgendem Pfad: Zusammenarbeit / Geschäftsbedingungen. Nicht fristgerecht eingereichte Angebote bleiben unberücksichtigt. Mit freundlichen Grüßen, i.V. Jiří Kulich i.V. Michala Senkyrova Dieses Schreiben wurde maschinell erstellt und ist ohne Unterschrift gültig. SKODA AUTO a.s. T.: Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic IČO: 00177041, Městský soud v Praze B 332 *T +420228241111* Image Analysis: ### Image Analysis #### Localization and Attribution - **Image Number**: Image 1 - **Position**: The single image occupies the entire page. #### Object Detection and Classification - **Objects Detected**: - Textual content - Company logo (Skoda) - Contact information details (including phone, email, and address) - List of terms and conditions #### Scene and Activity Analysis - **Scene Description**: The content is presented as a formal letter from Skoda AUTO a.s., likely intended for a business partner or supplier, requesting a quotation for a specific machining line. - **Main Actors and Actions**: - Skoda AUTO a.s., represented by Michala Senkyrova, is requesting a quotation. - The recipient of the letter, presumably a potential supplier or business partner, is expected to provide the requested quotation and adhere to the stated conditions. #### Text Analysis - **Extracted Text**: - Sender information: Skoda AUTO a.s., Václava Klementa 869, 293 60 Mladá Boleslav - Contact person: Michala Senkyrova, department of procurement, aggregates manufacturing, and infrastructure - Inquiry Number: SK 2024 001598 - The letter content includes a request for an offer for a machining line of the SSP E-drive motor box. - Conditions for submitting the offer through the corporate business platform. - Technical inquiries contact: Georgy.Komarov@skoda-auto.cz - Reference to business conditions valid from 04/2024, available on the provided URL. - Signing off by Jiri Kulich and Michala Senkyrova - **Significance**: - The text signifies a formal and structured business communication from Skoda AUTO a.s. to a potential supplier. - It includes all necessary details required for responding to the request. #### Color Analysis - **Dominant Colors**: - White (background) - Black (text) - Green and dark gray (logo) - **Impact on Perception**: The use of white and black ensures clarity and readability. The green in the Skoda logo is a recognizable brand color, reinforcing brand identity. #### Perspective and Composition - **Perspective**: The image represents a direct head-on view, typical of document scans or screenshots. - **Composition**: The layout is formal and structured. The company’s logo is positioned at the top right, contact information on the right-hand side, and the body of the letter follows in a block format. #### Contextual Significance - **Document Context**: As this appears to be a formal request for a quotation, it contributes to business operations and procurement processes within Skoda AUTO a.s. - **Overall Message**: The image highlights the professional and systematic approach of Skoda AUTO a.s. in handling procurement and business communications. ### Conclusion The image is a formal business communication from Skoda AUTO a.s. requesting a quotation for a specific machinery component from a potential supplier. It includes all necessary information for the recipient to respond appropriately, adhering to specified guidelines and conditions. The design and color scheme enhance readability and maintain the professionalism of the document. #################### File: Standardanschreiben.pdf Page: 2 Context: # Skoda AUTO a.s., Václava Klementa 869, 293 60 Mladá Boleslav **Purchaser:** Michala Senkyrova **Department:** Beschaffung Aggregatenfertigung und Infrastruktur **Telephone:** **E-Mail:** Michala.Senkyrova@skoda-auto.cz **Date:** Jun 26, 2024 **Inquiry no.:** SK 2024 001598 Dear Sir or Madam, Please submit a non-binding, free-of-charge offer based on our terms and conditions (as listed below) and using the attached documents for: **Obráběcí linka motorové skříně MGH SSP/Machining line of the SSP E-drive motor box** Please submit your bid via the Group business platform. For technical queries, please contact: ** ** Georgy.Komarov@skoda-auto.cz The terms and conditions below apply: - General Purchase Terms and Conditions of ŠKODA AUTO a.s. (04/2024) - The current version of the terms and conditions can be found at [VW Group Supply](http://www.vwgroupsupply.com). - Cooperation information / Purchasing Conditions Quotations submitted after the deadline will not be considered. Yours sincerely, p.p. Jiri Kulich p.p. Michala Senkyrova *This letter was generated automatically and is valid without a signature.* --- Skoda AUTO a.s. TŘ: Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic IČO: 00217074, Městský soud v Praze B 332 T*: +420202281111 Jun 26, 2024 | SK BA/2 | KSU 6.1 - 15 years | confidential Image Analysis: 1. **Localization and Attribution:** - **Image 1**: The entire page appears to be a single document with multiple sections. 2. **Object Detection and Classification:** - The document contains a logo, text, and a letter format. - Key features: - **Logo**: The Skoda Auto logo is visible at the top-right corner. - **Tables**: Structured information about the purchaser, department, and contact details. - **Text**: Formal letter content addressing the reader. 3. **Scene and Activity Analysis:** - The scene is that of a formal letter from Skoda AUTO a.s., represented as an inquiry or request for proposal (RFP). - The main actors are the purchaser Michala Senkyrova and the signatures or titles of Jiří Kulich and Michala Senkyrova. - Activities include the request for a bid submission and contact procedures for technical queries. 4. **Text Analysis:** - **Header Text**: - _"Skoda AUTO a.s., Václava Klementa 869, 293 60 Mladá Boleslav"_ - Company address and contact details of Skoda AUTO a.s. - Includes purchaser details: Michala Senkyrova, Department: Beschaffung Aggregatenfertigung und Infrastruktur, email and date. - **Body Text**: - Inquiry number: SK 2024 001598 - A request for a non-binding, free-of-charge offer for machining the line of the SSP E-drive motor box. - Contact details for technical queries and a mention of Georgey Komarov. - **Footer Text**: - Contains the company's contact information, registration details, and terms of validity. - **Significance**: This is a formal business communication for a procurement process, highlighting instructions for bid submission and technical communication. 10. **Contextual Significance:** - The document is significant in the context of procurement and supply chain management. It is a standard formal request for quotation (RFQ) designed to initiate the bidding process for a specific project within the automotive industry. - It sets out clear expectations for suppliers and provides the necessary details for the submission of bids. 13. **Graph Numbers:** - Not applicable as there are no graphs in the provided document. --- Additional Aspects: - **Prozessbeschreibungen (Process Descriptions)**: - The process described pertains to submitting a non-binding, free-of-charge offer based on outlined terms and conditions. - **Typen Bezeichnung (Type Designations)**: - "Obráběcí linka motorové skříně MGH SSP/Machining line of the SSP E-drive motor box" designates the type of project or product being referred to for the request. Overall, the document is a formal business correspondence from Skoda AUTO a.s. seeking bids for a machining project, detailing contact protocols and submission guidelines, embodying a methodical approach to vendor solicitation. #################### File: Standardanschreiben.pdf Page: 3 Context: # Skoda AUTO a.s., Václava Klementa 869, 293 60 Mladá Boleslav | Nákupek: | Michaela Senkyrová | |----------|---------------------| | Oddělení: | Beschaffung Aggregatenerfertigung und Infrastruktur | | Telefon: | Michaela.Senkyrova@skoda-auto.cz | | E-Mail: | Michala.Senkyrova@skoda-auto.cz | | Datum: | 26.6.2024 | Č. poptávky: SK 2024 001598 Vážení, žádáme Vás o nezávaznou a bezplatnou nabídku na základě našich níže uvedených nákupních podmínek zpracovanou podle poskytnutých podkladů pro: **Obráběcí linka motorové skříně MGH SSP / Machining line of the SSP E-drive motor box** Žádáme Vás o podání Vaší nabídky přes koncernovou obchodní platformu. Za technické dotazy odpovídá **Georgy Komarov** Telefon: E-mail: Georgy.Komarov@skoda-auto.cz Platí dále uvedené nákupní podmínky: - **Všeobecné nákupní podmínky ŠKODA AUTO a.s. (04/2024)** - Aktuální znění nákupních podmínek naleznete na [www.vwgroupsupply.com](http://www.vwgroupsupply.com) v následující složce: Informace o spolupráci / Nákupní podmínky Nabídky, které nebudou podány včas, nebudou akceptovány. S pozdravem v.z. Jiří Kulich v.z. Michaela Senkyrová Tento dopis byl vyhotoven automaticky a platí bez podpisu. Image Analysis: ### Comprehensive Examination of the Attached Visual Content: --- #### 1. Localization and Attribution: - **Image 1**: - This is the only image present on the page. - Located centrally, with textual content occupying the majority of the space. #### 4. Text Analysis: - **Detected Text**: - The letter is issued by Škoda AUTO a.s., located at Václava Klementa 869, 293 60 Mladá Boleslav. - The letter addresses a request for an offer (Č. poptávky: SK 2024 001598) dated 26.6.2024. - It is signed by Jiří Kulich and Michala Senkyrova. - **Content Analysis**: - **Request for Offer**: The letter requests an unverifiable and free offer based on specified purchase conditions for the "Machining line of the SSP E-drive motor box." - **Contact Information**: The contact person for technical queries is Georgy Komarov, and it includes the email, Michala.Senkyrova@skoda-auto.cz. - **Platform Submission**: Submission is requested through the company’s business platform. - **Purchase Terms**: Reference to the ‘General purchase conditions of ŠKODA AUTO a.s. (04/2024)’ and a link to the actual terms on their website. - **Important Note**: Offers not submitted in time will not be accepted. #### 8. Color Analysis: - **Dominant Colors**: - **Black and White**: Primarily used for text, providing high contrast for readability. - **Green**: In the Škoda logo, symbolizing the brand. - **Important Impact**: The usage of black and white ensures that the text is clear and easy to read. Green highlights (in the logo) associate the document with the company brand. #### 9. Perspective and Composition: - **Perspective**: - The document has a straightforward, flat perspective. - **Composition**: - Organized with the company logo on the top right, followed by contact information and a structured body of text. - Contains clearly marked sections for different parts of the letter (e.g., request, contact details, submission instructions). #### 10. Contextual Significance: - **Context in Document**: - This is a formal business letter intended for suppliers or partners, requesting an offer for specific manufacturing machinery. - It contributes to maintaining clear communication and procedural clarity within the procurement process. --- This document analysis highlights key textual elements, color usage to enhance readability, and the importance of composition for effective communication. No diagrams, charts, or tables are present, and thus not covered in this analysis. There are no anomalies detected, and all components appear to be in their expected places, contributing to the overall professionalism of the document. #################### File: Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf Page: 1 Context: # Škoda Auto a.s. ## Směrnice pro sjednocení prvků ### Projekt Obnova výrobních zařízení provozu PKG **Datum vydání:** 28.01.2020 Tato směrnice neruší platnost dříve vydaných směrnic, norem, požadavků zadání a ITS ŠkodaAuto. Pro komponenty, u kterých je povoleno několika dodavatelů, bude při zadání dodávky zařízení ve vztahu k projektu smluvně stanoven vždy jen jeden dodavatel. Potenciální dodavatelé jsou dodavatelé, kteří uvolnění pro projekt již mají, nebo je předpoklad, že po vyzkoušení a splnění koncernových standardů uvolnění do projektu mohou ještě dostat. ### Zpracoval: - Martin Janata PSZ/I/12 tel.: +420 732 294 691 - Milan Výpratchik PKG/4 tel.: +420 732 294 226 ### Schválil: - Aleš Ivanovič PSZ/I tel.: +420 730 869 870 - Ing. Ladislav Treml PKG/4 tel.: +420 732 294 945 - Ing. Roman Taneček PPK/2 tel.: +420 604 292 729 ### Přehled změn: | Datum | Strana | Poznámky | |-------------|----------------|-------------------| | 28.01.2020 | První vydání | | **Stránka 1 z 5** Image Analysis: ### Analysis of the Provided Document Image #### 1. Localization and Attribution: - The document appears to be a formal report from **Škoda Auto a.s.**. - The header consists of several details laid out in a tabular format: - Top-left: The company logo and the text "Škoda Auto a.s." - Top-center: The document title "Směrnice pro sjednocení prvků" (Guideline for the unification of elements). - Document title: "PSZ/1 - Metodika a standardizace" (Methodology and Standardization). - Project title: "Projekt Obnova výrobních zařízení provzu PKG" (Project Renewal of Production Equipment Operation PKG). - Date of issue: "Datum vydání: 28.01.2020". - There is a section named "Přehled změn" (List of changes) with columns for "Datum" (Date), "Strana" (Page), and "Poznámky" (Notes). #### 2. Object Detection and Classification: - Multiple stamps and signatures are present, indicating approval or verification stages. - The following objects were identified: - Company logo - Text boxes with contact information - Signatures and stamps #### 4. Text Analysis: - The primary text is a guideline for the "Obnova výrobních zařízení provzu PKG" (Renewal of Production Equipment Operation PKG) project. - Contact information: - **Martin Janata** (PSZ/12) - +420 732 294 691 - **Milan vypratchický** (PKG/4) - +420 732 294 226 - Approved by: - **Aleš Ivanovič** (PSZ/1) - +420 730 869 870 - **Ing. Ladislav Treml** (PKG/4) - +420 732 294 945 - **Ing. Roman Taneček** (PPK/2) - +420 604 292 729 The main body of the text explains that the guideline does not void any previously issued guidelines, norms, or requirements. It discusses supplier approval and conditions for equipment procurement. #### 6. Product Analysis: - No specific products were depicted in the document. The focus is on the procedural elements and approvals related to project management. #### 7. Anomaly Detection: - There do not appear to be any anomalies in the document. The layout and content are consistent with formal documentation. #### 8. Color Analysis: - The document primarily utilizes: - Black text on a white background for readability. - A green bar at the bottom, likely for highlighting changes or important notes. - Blue ink used for signatures and stamps, providing a clear contrast against the printed text. #### 11. Metadata Analysis: - Metadata like capture date and camera settings are not available from the document scan. #### 14. Tables: - The "Přehled změn" table contains rows for recording future changes with columns for: - **Datum** (Date) - **Strana** (Page) - **Poznámky** (Notes) The first entry in this table indicates the first issuance of the document on 28.01.2020, with no additional notes provided. ### Conclusion: This document from Škoda Auto a.s. outlines procedural standards for a project related to the renewal of production equipment. It includes detailed contact information, approval stamps, and a change log. The emphasis is on the workflow and authorization process, ensuring compliance with existing guidelines and norms. The document is well-structured and utilizes a formal and professional layout suitable for corporate communication. #################### File: Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf Page: 2 Context: # Škoda Auto a.s. **Směrnice pro sjednocení prvků** **Projekt Obnova výrobních zařízení provozu PKG** **Datum vydání:** 28.01.2020 **PSZ/1 - Metodika a standardizace** **1 - H - 20 CZ** ## I. Část: Standardy výrobních zařízení a komponentů Závazné jsou níže uvedené standardy v oblasti výroby agregátů koncernu VW: 1. Lastenheft Mechanik (dále jen KLH Mechanik) 2. Lastenheft Elektrik (dále jen KLH Elektrik) 3. ITS ŠkodaAuto, viz.: [CZ verze](#) | [DE version](#) | Poř. | Výrobní zařízení/komponenty | Uvolnění dodavatelé | Potenciální dodavatelé | Poznámky | |------|------------------------------------|-----------------------------------------|-------------------------|---------------------------| | 1. | Elektrika | Viz. část elektro, str.3-4 | | | | 0.1 | Dokumentace elektrika a řídicí technika | Eplan P8 ver. 2.2 nebo vyšší | | ITS: 1.11, 5.13 | | 2. | Mechanika | Festo, SMC | | ITS: 1.10 | | 3. | Pneumatika | Norgren | | ITS: 1.13 | | 4. | Mazání | SKF Lubrikation | | ITS: 1.17 | | 5. | Hydraulika | Bosch Rexroth, Parker | | ITS: 1.12 | | 6. | Filtrační technika | Hydac, Mahle, Bosch Rexroth | | ITS: 1.12 | | 0.6 | Čerpadla | KSB, Knoll, Grundfos | Viz KLH Mechanik | | | 7. | Šroubová technika | Bosch Rexroth | | Bosch Rexroth systém BS350| ## II. Část: Elektrika, řídicí systémy **Stránka 2 z 5** Image Analysis: ### Comprehensive Examination of the Visual Content **1. Localization and Attribution:** - There is only one image on the page. **4. Text Analysis:** - **Header:** - "Škoda Auto a.s." - "PSZ/1 - Metodika a standardizace" - "Směrnice pro sjednocení prvků" - "Projekt Obnova výrobních zařízení provozu PKG" - "Datum vydání: 28.01.2020" - **Main Section:** - "I. Část: Standardy výrobních zařízení a komponentů" - "Závazné jsou níže uvedené standardy v oblasti výroby agregátu koncernu VW:" - "1. Lastenheft Mechanik (dále jen KLH Mechanik)" - "2. Lastenheft Elektrik (dále jen KLH Elektrik)" - "3. ITS ŠkodaAuto, viz.: CZ verze DE version" - **Table:** - | Poř. | Výrobní zařízení/komponenty | Uvolnění dodavatelem | Potenciální dodavatelé | Poznámky | |-----|-------------------------------------------|---------------------------------|------------------------|--------------| | 1. | Elektrika | Viz část elektro, str.3-4 | | ITS: 1.11, 5.13 | | 01.1| Dokumentace elektrika a řídicí technika | Eplan P8 ver. 2.2 nebo vyšší | | ITS: 1.10 | | 2. | Mechanika | | | ITS: 1.10 | | 3. | Pneumatika | Festo, SMC | Norgren | ITS 1.13 | | 4. | Mazání | SKF Lurbrikation | | ITS 1.17 | | 5. | Hydraulika | Bosch Rexroth, Parker | | ITS 1.12 | | 6. | Filtrační technika | Hydac, Mahle, Bosch Rexroth | | ITS 1.12 | | 06.1| Čerpadla | KSB, Knoll, Grundfos | | Viz KLH Mechanik | | 7. | Šroubovací technika | Bosch Rexroth | Bosch Rexroth system BS350| | - **Footer:** - "II. Část: Elektrika, řídicí systémy" - "Stránka 2 z 5" **5. Diagram and Chart Analysis:** - The table categorizes various components and systems used in automotive manufacturing, along with their suppliers and potential notes or specifications. **8. Color Analysis:** - Dominant colors in the table used for categorization: - Green (for headers) - White (for cells) - Yellow (for notes/details) **13. Graph Numbers:** - The table structure outlines various production components, their suppliers, potential suppliers, and notes. ### Insights - **Text Analysis Insights:** - The content is focused on standardizing manufacturing components for Škoda Auto, presenting mandatory standards for VW group's production aggregate. - Lists suppliers released for certain components and identifies potential suppliers and specific notes for technical compliance. - **Diagram and Chart Analysis Insights:** - The chart provides an organized view of suppliers and potential suppliers for various automotive components, useful for procurement and compliance documentation. - **Color Analysis Insights:** - The use of distinct colors helps in differentiating between headers and content; green for headers, which draws attention to classification and breaks, and white/yellow for detailed specifications and notes. ### Overall Contextual Significance - This document page likely serves as part of a larger manual or guideline focusing on the technique and standardization processes in Škoda Auto's manufacturing, particularly for electrical and mechanical components within the VW group. - It contributes to ensuring consistency, quality control, and streamlined processes in their production lines. This concise analysis aligns with the document's objective to standardize and document essential suppliers and their associated components according to specified technical standards. #################### File: Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf Page: 3 Context: # Škoda Auto a.s. **PSZ/21 - Metodika a standardizace** Datum vydání: 28.01.2020 1 - H - 20 CZ | Poř. | Výrobní zařízení/komponenty | Uvolnění dodavatelé | Potenciální dodavatelé | Poznámky | |------|------------------------------------------------|-----------------------------|-----------------------------------|------------------------------------| | 1 | Řídící systém SPS(PLC) | Siemens | Siemens Simatic S7 řada 1500 - TIA V14 a vyšší | | | 2 | CNC Řízení | Siemens | Siemens (Sinumerik 840D sl.) | | | 3 | Řídící systém na bázi PC a panelový PC | Siemens | Systém - Simatic S7 (H/W SPS) | Profinet | | 4 | Vizualizace | Siemens WinCC Flexible | WinCC Flexible 2008 | | | 5 | Ovládací panely | Siemens | | | | 6 | Decentrální sběrnice | Profinet | Profibus, IO-link | | | 6.1 | Konektory pasivní sl switch (snímac,ventil) | Balluff, Murrelektronik | Balluff, IO-link | | | 7 | Decentrální periferie | Siemens | Siemens (ET 200 PRO) | Turck BL67 | | 8 | Robot | ABB | Kuka (Kuka s řízením VRKC 4) | | | 9 | Elektrické frekvenční pohony - měniče | SEW Eurodrive | Siemens | VW Konzern Freigabeitel | | 10 | Elektrické servo pohony | Siemens, Bosch Rexroth | Siemens | VW Konzern Freigabeitel | | 11 | Ovládací prvky - tlačítka, kontrolky | Schneider Electric | Schneider Electric | Specifikace Škoda Auto a.s. | | 12 | Dvouručí ovladač | Schneider Electric | Schmersal-Elan | Specifikace Škoda Auto a.s. | | 13 | Elektro skříně (rozvaděče) | Rittal | Rittal | VW Konzern Freigabeitel | | 14 | Svorkové skříně | Rittal | Plannenberg | VW Konzern Freigabeitel | | 15 | Chlazení rozváděčových skříně (klimatizace) | Sick | IFM Electronic, Balluff | Specifikace Škoda Auto a.s. | | 16 | Světlění závory/zavírače/scanner | ASO - Contra, Plz, Schneider Electric | Cognex, Keyence, Balluff | Specifikace Škoda Auto a.s. | | 17 | Čtecí zařízení čárového a DMC kódu | IOSS | Balluff, Turck-Banner | Specifikace Škoda Auto a.s. | | 18 | Identifikační a slyšicí prvky | Schneider Electric | Pepperl+Fuchs, Turck-Banner | Specifikace Škoda Auto a.s. | | 19 | Optický senzor | Sick, IFM Electronic, Balluff | | Specifikace Škoda Auto a.s. | **Stránka 3 z 5** Image Analysis: ### Analysis of Visual Content #### 1. Localization and Attribution - **Image Location:** The provided content is a single page document. - **Image Number:** Image 1 #### 4. Text Analysis - **Text Detection:** The document contains the following text titles and sections: - Header: "Škoda Auto a.s." - Document name: "PSZ/1 – Metodika a standardizace" - Subheader: "Směrnice pro sjednocení prvků" - Document purpose: "Projekt Obnova výrobních zařízení provozu PKG", "Datum vydání: 28.01.2020" - Section titles: "Poř. č.", "Výrobní zařízení/komponenty", "Uvolnění dodavatelé", "Potenciální dodavatelé", "Poznámky" - Footer: "Stránka 3 z 5" - **Content Analysis:** - **Header Information:** - Identifies the company and the document type. - **Main Table:** - Column Headers: Serial number, Component description, Approved suppliers, Potential suppliers, Notes. - Each row details a specific component related to production equipment, its approved suppliers, potential suppliers, and notes on specifications. - **Footer:** - Indicates the page number is 3 out of a total of 5 pages. #### 5. Diagram and Chart Analysis - **Table Analysis:** - **Content:** - Lists various production equipment components and their suppliers. - Rows detail specific components, such as "Řídící systémy SPS/PLC", "CNC Řízení", etc. - Columns provide information on current approved suppliers, potential future suppliers, and relevant notes or specifications. - **Key Insights:** - Clear identification of suppliers and potential vendors facilitates procurement and standardization. - Notes provide additional context regarding each component's requirements (e.g., series or specifications). #### 10. Contextual Significance - **Overall Document Purpose:** - The document serves as a standardization guideline for the production equipment at Škoda Auto a.s. - Facilitates the unification of components and suppliers to streamline procurement and production processes. - Ensures clarity in choice of suppliers and highlights potential options for future consideration. #################### File: Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf Page: 3 Context: #### 13. Graph Numbers - **List of Data Points:** - **Row Data:** | Poř. č. | Výrobní zařízení/komponenty | Uvolnění dodavatelé | Potenciální dodavatelé | Poznámky | |--------|-------------------------------------------------------------|--------------------------------------------------|-------------------------------------------------|--------------------------------------------| | 1 | Řídící systémy SPS/PLC | Siemens | | Siemens Simatic S7 řada 1500 - TIA V14 a vyšší | | 2 | CNC Řízení | Siemens | | Siemens (Sinumerik 840D sl) | | 3 | Řídící systémy na bázi PC a panelové PC Nadřazené řízení - Komunikační modul | Siemens | | Systém - Simatic S7 (HW SPS) Profinet | | 4 | Vizualizace | Siemens WinCC Flexible | | WinCC Flexible 2008 | | 5 | Ovládací panely | Siemens | | Simatic Optic Series | | 6 | Decentrální sběrnice | Profinet | | Profibus, IO-link | | 6.II | Konektorové pasivní slučovače (snímač,e ventil) | Balluff, Murrelektronik | | | | 6.III | Konektorové aktivní slučovače (snímač,ventil) | Balluff, IO-link | | | | 7 | Decentrální periferie | Siemens | Siemens (ET 200 PRO) | Turck BL67 | | 8 | Robot | ABB | Kuka | Kuka s řízením VKRC 4 | | 9 | Elektrické frekvenční pohony - měniče | SEW Eurodrive | Siemens | VW Konzern Freigabeliste | | 10 | Elektrické servo pohony | Siemens, Bosch Rexroth | | | | 11 | Ovládací prvky - tlačítka, kontrolky | Schneider Electric | Siemens | Specifikace Škoda Auto a.s. | | 12 | Dvouruční ovladač | Schneider Electric | Schmersal-Elan | Specifikace Škoda Auto a.s. | | 13 | Elektro skříně (rozvaděče) | Rittal | | VW Konzern Freigabeliste | | 14 | Svorkové skříně | Rittal | Pfannenberg | VW Konzern Freigabeliste | | 15 | Chlazení rozváděcových skříní (klimatizace) | Rittal | | Specifikace Škoda Auto a.s. | | 16 | Svíteleí zavovy/lasery/scanner | Sick | | Specifikace Škoda Auto a.s. | | 17 | Ochranné rohože, bezpečnostní relé | ASO - Contra, Pilz, Schneider Electric | | Specifikace Škoda Auto a.s. | | 18 | Čtecí zařízení čárového a DMC kódu | IOSS | Cognex, Keyence, Balluff | Specifikace Škoda Auto a.s. | | 19 | Identifikační systémy | Balluff, Turck-Banner | Siemens, Murrelektronik | Specifikace Škoda Auto a.s. | | 20 | Optický senzor | Sick, IFM Electronic, Balluff | | Specifikace Škoda Auto a.s. | This detailed analysis provides a comprehensive breakdown and interpretation of the image content provided. #################### File: Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf Page: 4 Context: # Škoda Auto a.s. ## Směrnice pro sjednocení prvků ### Projekt Obnova výrobních zařízení provozu PKG **Datum vydání:** 28.01.2020 **PSZ1 - Metodika a standardizace** **1 - H - 20 CZ** | Poř. | Výrobní zařízení/komponenty | Uvolněný dodavatelé | Potenciální dodavatelé | Poznámky | |------|--------------------------------------------------|-----------------------------------------|----------------------------------------|--------------------------------| | 21 | Indukční senzory, polohové spínače a koncové spínače | Balluff, IFM Electronic | Sick | Specifikace Škoda Auto a.s. | | 22 | Svorky a svorkové příslušenství | Phoenix Contact, Wago | Siemens | Specifikace Škoda Auto a.s. | | 23 | Průtokoměry a teploměry | IFM Electronic, Hydac | Parker, Bosch Rexroth | Specifikace Škoda Auto a.s. | | 24 | Instalace senzorů a koncových spínačů | Balluff - Lumberg | Pepperl+Fuchs | Specifikace Škoda Auto a.s. | | | kabely, konektory a příslušenství snímačů | Murr elektroník | | | | 25 | Konektory - těžké a lehké | Harting, Phoenix Contact, Weidmüller | Murrelektronik | | | 26 | Světelná signalizace - majáky a signální světla | Murrelektronik | Siemens | | | 27 | Včakové bezpečnostní spínače | Schmersal | Balluff | | | 28 | Bezpečnostní spínače - ochranných devět, okén, atd.| Pilz, Schmersal | Euchner | | | 29 | Bezpečnostní systém a bezp. moduly | Pilz, Siemens | Schneider Electric | Pilz (PNOZsigma) | | 30 | Mechanické koncové spínače | Balluff, Siemens | Euchner | Specifikace Škoda Auto a.s. | | 31 | Instalační kabely | LAPP Kabel | Helukabel | | | 32 | Vysoké flexibilní kabely | LAPP Kabel | Hellermann | | | 33 | Přeptávek odchovy | Hakel | ABB | | | 34 | Kabelevé kanály a žlaby | OBO-Bettmermann, Niedax | Kopos Kolin | | | 35 | Energeticky přípoje kabelové řetězy | Murpiplast, Brevett | Kabelschelp | | | 36 | Optická měření | IFM, Keyence | Sick | Specifikace Škoda Auto a.s. | | 37 | Kárové svorky, Keyence, Sick | | | Specifikace Škoda Auto a.s. | | 38 | HEIDENHAIN | | | | **Stránka 4 z 5** Image Analysis: **Image Analysis:** 1. **Localization and Attribution:** - **Image Number:** Image 1 2. **Object Detection and Classification:** - **Objects:** - A table containing text divided into several columns and rows. 3. **Scene and Activity Analysis:** - The image depicts a table listing various manufacturing equipment/components, their suppliers, potential suppliers, and relevant notes. 4. **Text Analysis:** - **Text Detected:** - The table is titled "Škoda Auto a.s." - Contains headers like "Výrobní zařízení/komponenty," "Uvolnění dodavatelé," "Potenciální dodavatelé," and "Poznámky." - Rows contain product/items (e.g., "Indukční senzory, polohové spínače a koncové spínače"), suppliers (e.g., "Balluff, IFM Electronic"), and notes (e.g., "Specifikace Škoda Auto a.s."). - **Analysis:** - The table is a standardized methodology document likely used for project management or procurement within Škoda Auto a.s. - It details different types of manufacturing components, their approved suppliers, potential alternatives, and specifications or notes. 5. **Diagram and Chart Analysis:** - No graphics or charts are present in the image. 6. **Product Analysis:** - **Products:** - Various manufacturing components such as indiction sensors, connectors, safety devices, cables, etc. - Key features include different supplier and potential supplier names. 7. **Anomaly Detection:** - There are no noticeable anomalies in the table; it presents structured and expected information. 8. **Color Analysis:** - The table mostly uses standard office colors. - A green header row and dividing lines distinguish each section. 9. **Perspective and Composition:** - The image is taken from a direct overhead perspective, typical for documents or tables. - The elements are arranged in vertical columns and rows for easy reference. 10. **Contextual Significance:** - The table likely serves as part of a broader strategy or guidelines for procurement or standardization within Škoda Auto a.s. - It organizes information regarding equipment and their approved suppliers which may help in ensuring quality and consistency. 13. **Graph and Trend Analysis:** - No graphs are included. **Additional Aspects:** - **Ablaufprozesse (Process Flows):** - The table potentially depicts a process of selecting and standardizing suppliers for various components. - **Prozessbeschreibungen (Process Descriptions):** - It may suggest a process where primarily approved suppliers are used, with potential suppliers considered, and noted specifications adhered to. - **Typen Bezeichnung (Type Designations):** - Types and categories are specified by the nature of the components listed in the table (e.g., "Indukční senzory" for induction sensors). - **Tables:** - The table lists serial numbers (Poř.), production equipment/components, approved suppliers, potential suppliers, and notes/comments. - Each row provides detailed information about specific equipment and suppliers. **Table Content Breakdown:** - **Poř.:** Serial number. - **Výrobní zařízení/komponenty:** Manufacturing equipment/components. - **Uvolnění dodavatelé:** Approved suppliers. - **Potenciální dodavatelé:** Potential suppliers. - **Poznámky:** Notes/comments indicate specifications or standardization references. The table structure and information provide a clear and structured way to manage supplier relationships for specific components in the manufacturing process of Škoda Auto a.s. #################### File: Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf Page: 5 Context: # Škoda Auto a.s. ## Směrnice pro sjednocení prvků Projekt Obnova výrobních zařízení provozu PKG Datum vydání: 28.01.2020 | PSZ/1 - Metodika a standardizace | 1 - H - 20 CZ | |-----------------------------------|---------------| | 39. Záložní zdroje napájení | Siemens, APC, Murrelektronik | Phoenix Contact | | 40. Tlakové snímače | Rexroth, Parker, IFM | Hydac | **Specifikace Škoda Auto a.s.** Image Analysis: ### Detailed Analysis of the Image #### 1. Localization and Attribution - **Image Number:** Image 1 #### 4. Text Analysis - **Detected Text:** - SIMPLY CLEVER - Škoda Auto a.s. - PSŽ/1 - Metodika a standardizace - 39. Záložní zdroje napájení - 40. Tlakové snímače - Siemens, APC, Murrelektronik, Phoenix Contact - Rexroth, Parker, IFM, Hydac - Směrnice pro sjednocení prvků Projekt Obnova výrobních zařízení provozu PKG - Specifikace Škoda Auto a.s. - 1 - H - 20 CZ - Datum vydání: 28.01.2020 - Stránka 5 z 5 **Text Analysis:** - **Language:** The text is primarily in Czech. - **Content Analysis:** - The text provides information about a project and document specifications for Škoda Auto a.s. - The document appears to focus on the methodology and standardization, specifying components like backup power sources ("Záložní zdroje napájení") and pressure sensors ("Tlakové snímače") from various suppliers. - The suppliers mentioned include Siemens, APC, Murrelektronik, Phoenix Contact, Rexroth, Parker, IFM, and Hydac. - The document also contains a date of issuance (28.01.2020) and is identified as part of a series (Page 5 of 5). #### 5. Diagram and Chart Analysis - **Analysis:** No diagrams or charts are present in this image. #### 6. Product Analysis - **Analysis:** No products are depicted in this image directly. #### 7. Anomaly Detection - **Analysis:** There are no noticeable anomalies or unusual elements in the image. #### 8. Color Analysis - **Dominant Colors:** - White background with black text and thin black lines - Green logo of Škoda **Impact on Perception:** - The use of a white background with black text ensures clarity and readability. - The green logo stands out, emphasizing brand identity. #### 9. Perspective and Composition - **Perspective:** - The image is a top-down view of a document. **Composition:** - The elements are well-aligned and structured within tables and boxes, providing a clear and professional layout. - The logo and title are positioned at the top, followed by the main content in tabulated form. #### 10. Contextual Significance - **Analysis:** - The image appears to be a page from a larger technical or procedural document related to Škoda Auto a.s. - It details specific technical specifications and standards to be followed, suggesting its use in guiding or documenting engineering and manufacturing processes. #### 12. Graph and Trend Analysis - **Analysis:** No graphs are present in this image. #### 13. Graph Numbers - **Analysis:** There are no graph numbers to list as no graphs are present. ### Additional Aspects - **Ablaufprozesse (Process Flows):** - No specific process flows are depicted. - **Prozessbeschreibungen (Process Descriptions):** - No detailed process descriptions are included. - **Typen Bezeichnung (Type Designations):** - The document refers to specific types of equipment, namely backup power sources and pressure sensors. - **Trend and Interpretation:** - The consistent reference to well-known technical suppliers indicates a standardization trend within the company's equipment sourcing. - **Tables:** - The main table categorizes different components and their suppliers, split into two rows. In summary, the image is a structured page from a technical document by Škoda Auto a.s., detailing various components and their standardization for a specific project. The clear presentation and professional layout enhance its usability for engineering and manufacturing purposes. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 1 Context: # TECHNICKÉ ZADÁNÍ ## LASTENHEFT ### Lastenheft-Gegenstand **Version vom 23.08.2024** Bearbeitungslinie für Motorgehäuse für Elektroantrieb SSP **Vypracoval** | **Oddělení** | **Datum** | **Podpis** --- | --- | --- | --- G. Komarov | PPK-E | | **Schválil** | **Oddělení** | **Datum** | **Podpis** --- | --- | --- | --- R. Taneček | PPK-E | | Z. Nekola | PPK | | J. Paldus | PKG/1 | | R. Schrom | PKG/4 | | M. Kargl | PKT/42 | | M. Adamec | PKG/3 | | J. Johan | PKT/3 | | Z. Chytka | PKT/14 | | K. Tlášek | PKT/1 | | J. Cikler | GQH-1/4 | | M. Repš | GQH-3 | | J. Beneš | PKT/2 | | M. Janata | PSZ/11 | | R. Chudoba | PKT | | J. Nohej | PSU | | --- *INTERNAL* 1/10 Image Analysis: ### Analysis of the Provided Visual Content #### 1. Localization and Attribution - **Image Number:** Image 1 - **Location:** This is the only image on the page. #### 2. Object Detection and Classification - **Objects Identified and Classified:** - **Text and Header Sections:** The document contains multiple headers and sections with text. - **Table:** A structured table listing names and departments. #### 4. Text Analysis - **Headers and Text Blocks:** - The main header in Czech: "TECHNICKÉ ZADÁNÍ LASTENHEFT" translates to "Technical Specification Requirements." - Subheader: "Lastenheft-Gegenstand Version vom 23. 08. 2024 Bearbeitungslinie für Motorgehäuse für Elektroantrieb SSP" which means "Specification Subject Version of 23. 08. 2024 Processing line for motor housings for electric drive SSP." - Project details and contact information are listed at the top-right corner. - Department and roles such as "Vypracoval Erarbeitet" (Prepared by) and "Schváli Genehmigt" (Approved by) are mentioned. - **Table Content:** - The table contains multiple columns labeled: - **Vypracoval Erarbeitet (Prepared by)** - **Oddělení Abteilung (Department)** - **Datum (Date)** - **Podpis Unterschrift (Signature)** - Various names associated with departments are listed without specific dates or signatures. #### 11. Metadata Analysis - **Date Specification:** The document is marked with "Version vom 23. 08. 2024" indicating it is a version dated August 23, 2024. - **Contact Information:** - Telephone numbers: +420 736864347, +421908 147521 #### 12. Graph and Trend Analysis - **Data Points Identification:** - Names and departments listed in the table relevant to several categories like PPK-E, PPK, PKG/1, etc. #### Additional Aspects ##### Ablaufprozesse (Process Flows) - **Process Flow Indications:** - The document seems to follow a specified process flow involving preparation and approval, as indicated by the structure of the table. ##### Prozessbeschreibungen (Process Descriptions) - **Departmental Assignments:** - Each individual listed in the table appears to be assigned to a specific department, which likely follows a pre-determined process for the preparation and approval of the technical specifications. ##### Trend and Interpretation - **Approval Process Structure:** - The table reflects a clear structure in organizational departments and their roles in the approval process for technical specifications. #### Color Analysis - **Color Composition:** - The document primarily uses black text on a white background. - Key information is highlighted with yellow, making it easily noticeable. #### Perspective and Composition - **Composition:** - The document uses a structured and organized layout, with headers at the top, details in the center, and a table at the bottom. - The organized placement of the text and table contributes to its readability and clarity. #### Contextual Significance - **Document Purpose:** - This document serves as a technical specification requirement for a project related to processing motor housings for electric drives, suggesting it is an important document in the context of project management and engineering. Overall, the image is a structured technical specification document with a clear layout highlighting roles and approval processes within specified departments. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 2 Context: # 1. Vergabgegenstand Bearbeitungslinie für Motorgehäuse für Elektronantrieb SSP. ## 2. Angaben über das zu bearbeitende Bauteil **Bauteil:** Motorgehäuse SSP HA LK3,4 **Zeichnungsnummer:** OQA.901.108 **Gewicht des bearbeiteten Teils:** 14,975 kg (davon die Lagerbuchse 0,369 kg) **Rohteilgewicht:** ca 18 kg **Material:** Gehäuse OQA 901 108 EN AC - 46000 - AISi9Cu3 (Fe) **Lagerbuchse:** OQA 901 261 A DIN 30910-SINT D-11 **Grundmaße:** siehe Zeichnung ## 3. Geforderte Anlagenfunktionen 3.1 Bearbeitung des Gussteils gemäß der Zeichnung Oqa_901_108-sspha_mg_fz (siehe Anlage Nr. 8). 3.2 Eingangstand des Teiles – Gusstechnik (Hochdruckguss) – siehe 3D Daten (Anlage Nr. 7). Die Zeichnung des Gussteils ist noch nicht verfügbar und wird später erstellt. Allgemein kann man mit den Toleranzen des Gussteils nach ISO 8062-3 - DCTG7 - GCTG3 rechnen. 3.3 Ausgangstand des Teiles – bearbeitetes Teil – siehe Zeichnung (Anlage Nr. 8). 3.4 Das Prozessablaufschema und der Lieferumfang siehe Anlage 5. ## 4. Forderungen auf die Anlagenausführung 4.1 Modulare Linie der Bearbeitungszentren, verknüpft durch ein Portal. Die Bearbeitungszentren (Module) und das Portal werden schrittweise nach dem Zeitplan gebaut – siehe Punkt Nr. 7. 4.2 Die Linie soll über SPC-Stellen verfügen, damit die Teile nach jeder Arbeitsfolge zur Messung entnommen und wieder in den Strom eingelegt werden können. 4.3 Der Transport des Teils zum Überprüfungspunkt unter dem Portal erfolgt über ein Förderband mit Spannvorrichtungen. Positionierung des Teils auf der Transportvorrichtung gemäß den Empfehlungen des Lieferanten der Linie und den technischen Möglichkeiten des Verpackungslieferanten. ### Die Schnittstelle zwischen der ML und der Verkettung vor und nach der Linie: - **Ladevorrichtung** – im Lieferumfang des Lieferanten der ML - **Förderer** – im Lieferumfang Škoda Auto a.s. ![Diagramm](./path/to/diagram.png) Image Analysis: ### Comprehensive Examination of the Provided Visual Content #### 1. Localization and Attribution - **Image Description**: The image is a single-page document. - **Content Type**: Textual document with sections, bullet points, and a diagram. #### 2. Object Detection and Classification **Image 1**: - **Objects Detected**: - Text blocks - Bullet points - Color-highlighted text - Diagram with labeled sections #### 4. Text Analysis - **Main Text Content**: - The document appears to be a technical specification or requirements document related to the processing line for a motor housing for electric drives (Elektronatrieb SSP). - Various sections contain headings, descriptions, and detailed requirements. - **Extracted Headings and Key Points**: - **1. Vergabegegenstand**: This section describes the purpose or subject of the document, focusing on the processing line for motor housings. - **2. Angaben über das zu bearbeitende Bauteil**: Details about the part to be processed including its ID, weight, material, and other specifications. - **Bauteil**: Motorgehäuse SSP HA LK3,4 - **Zeichnungsnummer**: QOA.901.108 - **Gewicht des bearbeiteten Teils**: 14.975 kg (davon die Lagerbuchse 0.369 kg) - **Rohteilgewicht**: ca 18 kg - **Material**: Gehäuse QOA 901 108, EN AC – 46000 – AlSi9Cu3 (Fe) - Lagerbuchse QOA 901 261 A, DIN 30910-SINT D-11 - **Grundmaße**: siehe Zeichnung - **3. Geforderte Anlagenfunktionen**: Requested functionalities of the system, including processing requirements and data references. - **4. Forderungen auf die Anlagenausführung**: Requirements for system execution, describing modular line construction, transport details, and references to additional documents (e.g., point number 7 for detailed timelines). - **Highlighted Sections**: - Various parts of the text are highlighted in yellow, suggesting significant points or actions required. - **Diagram**: - Represents a modular processing line with different connected stations. - **Color Codes**: - Green: "Ladevorrichtung – im Lieferumfang des Lieferanten der ML" - Blue: "Förderer – im Lieferumfang Skoda Auto a.s." #### 6. Product Analysis - **Main Products Depicted**: - Motorgehäuse (Motor housing) - Materials used: Aluminum alloy (EN AC – 46000 – AlSi9Cu3 Fe), Steel bushings (DIN 30910-SINT D-11). - **Description**: The motor housing's specifications such as weight, material, and dimensions are detailed, with a focus on the functional processes necessary for production. #### 10. Contextual Significance - **Document Purpose**: Provides technical guidelines and requirements for the construction and operation of a modular processing line for motor housing production. - **Contribution to Overall Message**: This image contributes detailed technical specifications and procedural requirements essential for professionals involved in the setup and regulation of an automotive component processing line. #### 12. Graph and Trend Analysis - **Diagram Analysis**: - The bottom part of the image presents a diagram depicting a series of operational stations termed as "BAZ" with different labeled areas. - **Trends**: Suggests a linear, modular approach to processing with interlinked modules (Ladevorrichtung and Förderer). #### 14. Ablaufprozesse (Process Flows) - **Process Descriptions**: - The text describes a step-by-step modular process flow for processing motor housings, including the use of a portal for the sequencing of steps. ### Conclusion The image presents a technical document that delineates detailed specifications and procedural guidelines for setting up a processing line for electric motor housings, with clear instructions and a diagram to illustrate the modular nature of the system. The text and diagram work together to guide the reader on construction, execution, and delivery requirements. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 3 Context: # Bearbeitungsrichtlinie für Motorengüsse für Elektromotoren SSP ## 4.4. Die Bearbeitung (der ganze Prozess) wird mittels Kühlflüssigkeit (Emulsion) bevorzugt und empfohlen - **Spezifikation der Emulsion nach Škoda** ### 4.4.1 Preisgestaltung der Schnittstelle mit der Emulsionszentrale (Lieferung der Emulsionszentrale seitens Škoda Auto a.s.) - **Spezifikation der erforderlichen Emulsionsmenge (l/min)** | | | | | | | |-------|-------|-------|-------|-------|-------| | KSS | BAZ | BAZ | BAZ | BAZ | | | | im Lieferumfang des Lieferanten | im Lieferumfang Škoda Auto a.s. | | | | | | | | | | | | | | | | | | | | | | | | | ### 4.4.2 OPTION zu jeder Maschine die Filteranlage und Temperieremulsion + Spänentransport mittels Förderer anbieten (Höhe des Späneträgers 1.500 mm) | | | | | | | |-------|-------|-------|-------|-------|-------| | KSS | BAZ | BAZ | BAZ | BAZ | | | | im Lieferumfang des Lieferanten | im Lieferumfang Škoda Auto a.s. | | | | ## 4.5 OPTION die Variante der Kombination MMS und KSS anbieten ### 4.5.1 Operation Vorbearbeitung: - Es wird die Minimalmischtechnik (MMS/MQL) eingesetzt - Spänentransport mittels Förderer (Höhe des Späneträgers 1.500 mm) ### 4.5.2 Operation Feinbearbeitung - unter Kühlflüssigkeit (für jedes Zentrum eine Anlage zum Filtern und Temperieren der Emulsion anbieten) - Spänentransport mittels Förderer (Höhe des Späneträgers 1.500 mm) Image Analysis: ### Comprehensive Examination #### 1. Localization and Attribution: - **Image 1:** - Located at the top of the document, illustrating section 4.4.1. - **Image 2:** - Located near the middle of the document, illustrating section 4.4.2. - **Image 3:** - Located near the bottom of the document, illustrating section 4.5.2. #### 2. Object Detection and Classification: - **Image 1:** - **Objects Detected:** - Emulsions Central System model: Blue rectangles labeled "BAZ" and "KSS." - Textboxes indicating the supply chain ("im Lieferumfang des Lieferanten" and "im Lieferumfang Škoda Auto a.s.") - **Classification:** - Industrial/Engineering Diagram - **Image 2:** - **Objects Detected:** - Emulsion Decentralized Setup: Blue rectangles labeled "BAZ" and another label "Dezentral Emulsion Anlagen." - Textboxes for supply chain references. - **Classification:** - Industrial/Engineering Diagram - **Image 3:** - **Objects Detected:** - Combination setup of MMS and KSS: Blue rectangles labeled "BAZ," "MMS," and "KSS." - Textboxes indicating the supply chain. - **Classification:** - Industrial/Engineering Diagram #### 3. Scene and Activity Analysis: - **Image 1:** - **Scene:** Diagram displaying the distribution of an emulsion central system showing different units (KSS). - **Activities:** Denoting the inclusion of units in supplier and Škoda Auto's supply scope. - **Image 2:** - **Scene:** Diagram for decentralized emulsion applications. - **Activities:** Displaying the emulsion's filtration and transportation process across machine units. - **Image 3:** - **Scene:** Diagram showing an integrated system with MMS (Minimum Lubrication) first-cut and KSS for fine processing. - **Activities:** Displaying both pre-processing (MMS) and post-processing (KSS) units and their supply details. #### 4. Text Analysis: - **Section Titles:** - **4.4:** Process through emulsion cooling recommended by Škoda. - **4.4.1:** Price layout for the Schnittstelle (interface) with Škoda's emulsion central station. - **4.4.2:** Option for each machine's filtration and temperature emulsion setup with conveyor. - **4.5:** Combination option for MMS and KSS. - **4.5.1:** Operation preparation information. - **4.5.2:** Operation fine processing information. - The text primarily provides specifications, options, and processing instructions relevant to industrial setups for emulsions and lubrication. #### 7. Anomaly Detection: - **General Observation:** - No apparent anomalies in the diagrams or process illustrations. All elements are consistent with standard engineering documentation. #### 8. Color Analysis: - **Dominant Colors:** - Blue: Used for rectangles indicating units like BAZ, KSS, and MMS. - Yellow highlights: Indicate important points or sections. - Gray/Black for text and lines: Standard coloring for document readability. #### 9. Perspective and Composition: - **Diagram Perspective:** - Top-down view diagram of process systems. - **Composition:** - Rectangles represent different units or section parts connected by lines, organized systematically to denote flow or supply chain structure. Each diagram includes legends/textboxes indicating supply scope. #### 11. Metadata Analysis: - The metadata is not provided in the provided visual content for analysis. #### Additional Aspects: #### Ablaufprozesse (Process Flows): - Each diagramming section explains the process flow of emulsion and lubrication systems within an industrial setup. Detailed supply chains indicate which parts fall under supplier and Škoda Auto's responsibility. #### Prozessbeschreibungen (Process Descriptions): - Detailed descriptions within highlighted sections (yellow) and illustrations specifying each unit's functionality, integration, and supply allocation. #### Typen Bezeichnung (Type Designations): - Emulsion Central System (KSS), Minimum Lubrication Technology (MMS), and their respective associated units. ### Conclusion: The document provides an illustrative and textual overview of industrial setups for emulsion cooling processes and lubrication systems. Diagrams convey process flows and supply chain elements, yellow highlights emphasize significant details, and all diagrams maintain a consistent and clear industrial documentation format. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 4 Context: # LHI-Gesamtstand Beauftragte für Montagehilfe für Elektronikmodule SSP SIPK-E. Kainz, volles Personenzeichen Mitarbeiter: Böller HRA: 202480 Datum: 23.03.2024 --- ## 4.6 Die Maschinen sollen für den Anschluss von der oberen Seite an die Absaug- und Filtrationsanlage vorbereitet sein. Die Absaug- und Filtrationsanlage gehört nicht zur Lieferung und wird von ŠKODA AUTO AG geliefert. Festlegung erforderlicher Leistung / Menge der Abluft (m³/h) ## 4.7 **OPTION:** die Absaugung und Filtration inkl. Rohrleitung anbieten. ## 4.8 Abnahme nach TGS 02.09 und VwV 101 30 – siehe Anlagen Nr. 10 und 11. ## 4.9 Erforderliches Spannschema siehe Anlage Nr. 14. ## 4.10 Steuerung Siemens – Anforderungen für Steuerung siehe Anlage Nr. 6. ## 4.11 Am Anfang der ML müssen sich 2 stationäre Kameras zur Lesung von DMC-Codes von Teilen befinden, ein manuelles DMC-Lesegerät an jedem SPC Standard. --- ## 5. Weitere Anforderungen ### 5.1 Bestimmen Sie den kürzestmöglichen Liefertermin von 50 bearbeiteten und gemessenen Mustern, die der technischen Dokumentation entsprechen, ab dem Zeitpunkt der Bestellung des Auftragsgegenstandes. Verarbeitung des Terminplans für die Zusendung von Mustern und diese in einem separaten Posten preisgestalten. ### 5.2 **OPTION:** Werkzeug für 1 Maschine/OP nach ITS 3.10. ### 5.3 **OPTION:** Unterstützung nach Übergabe der Inbetriebnahme im Umfang von 1 Arbeiter/1 Woche anbieten. ### 5.4 **OPTION:** Schulung anbieten. ### 5.5 Abschätzung der Standzeit von Werkzeugen und Kosten pro Stück für die Lagerbuchse-Bearbeitungswerkzeuge. --- ## 6. Anforderungen auf die Anlageneistung | Parameter | Wert | |-------------------------|----------------------| | Kapazität | 232 000 Stck./Jahr | | Taktzeit der ML | 75 s | | Tägliche Arbeitszeit | 22,5 Std. | | Arbeitstage pro Jahr | 250 Tage | | Technische Verwendbarkeit| 86% | | Ausschussquote | 0% | | Prozessstabilität | bewertete siehe ITS ŠKODA Auto Standards | | **OPTION** | 2. ML mit gleicher Kapazität, siehe Layout in der Anlage Nr. 3 | --- ## 7. Terminplan | Activity | 2024 | 2025 | 2026 | |--------------------------------------------|-----------|-----------|-----------| | Bestellungen | 01/25 | | | | Lieferung, Inbetriebnahme und Übergabe | 1xABZ OP + komplette Automatisierung | A 14/26 | | | TBT-PVS | | A 18/26 | | | PVS | | A 27/26 | | | Nullisierung | | | 05/27 | | Lieferung, Inbetriebnahme und Übergabe | | 07/27 | | | restliche BAZ für erforderliche Kapazität | 2 Tage PoD | | 11/27 | | SOP | | | | Image Analysis: ### Image Localization and Attribution: 1. **Image Numbering and Identification:** - Image 1: The entire page consists of textual information, a table, and a colored bar chart. ### Object Detection and Classification: 1. **Textual Content:** - Extensive text in German. - Table containing technical data and requirements. - Colored bar chart representing a schedule or timeline. 2. **Table:** - Located in section 6 titled "Forderungen auf die Anlagenleistung." - Contains specifications of machine performance metrics. 3. **Bar Chart:** - Located in section 7 titled "Terminplan." - Showcases different activities over the years from 2024 to 2027. ### Scene and Activity Analysis: 1. **Entire Scene:** - The document appears to be a technical specification or project planning sheet for equipment or machinery. - Structured into sections with headings in bold, indicating different phases and requirements of a project. 2. **Main Activities:** - Describes various options, requirements, and suggestions for equipment (e.g., filtration, camera usage). - Indicates delivery times, workforce planning, and evaluation of equipment life span and cost. ### Text Analysis: 1. **Section Headings:** - "Weitere Anforderungen" (Further Requirements) - "Forderungen auf die Anlagenleistung" (Demands on Plant Performance) - "Terminplan" (Schedule) 2. **Significant Text Content:** - "Optionen" (Options) for various requirements and suggestions. - Technical parameters for machinery such as capacity, operating time, and efficiency. - Timetable with tasks and milestones over the years 2024 to 2027. ### Diagram and Chart Analysis: 1. **Bar Chart in Section 7:** - Activities are listed on the Y-axis. - The timeline extends over the years 2024 to 2027 on the X-axis. - Gantt-style bars represent the duration of each activity. ### Product Analysis: 1. **Not applicable** ### Anomaly Detection: 1. **Not applicable** ### Color Analysis: 1. **Text Color:** - Predominantly black text with some headings and important sections highlighted in yellow for emphasis. 2. **Chart Colors:** - Bars in different colors (green, red) indicating different activities or stages. ### Perspective and Composition: 1. **Perspective:** - The visual content is organized in a standard document layout. 2. **Composition:** - The document is composed of numbered sections and subsections for clarity. - A combination of text, table, and chart to present information. ### Contextual Significance: 1. **Document Purpose:** - The document is likely a project plan or technical requirement sheet for the installation and operation of industrial machinery. 2. **Contribution to Overall Theme:** - Provides detailed specifications, schedules, and requirements, crucial for planning and implementation phases. ### Graph and Trend Analysis: 1. **Gantt Chart Analysis:** - Illustrates the timeline for various activities such as initial setup, ongoing support, tooling, training, and cost estimations. - Shows dependencies and timelines for these activities from 2024 to 2027. 2. **Significance:** - Helps in visualizing project timelines, planning resources, and understanding the sequence of tasks. ### Graph Numbers: 1. **Data Points in the Gantt Chart:** - Activities: Bestellung, Lieferung, Unterstützung, Schulung, Tooling. - Timeline: Specific months and years highlighted (e.g., 01/25, 05/27). ### Summary: The document is a detailed project plan consisting of machine specifications, additional requirements, and a timeline for implementation activities. It includes a table specifying machine capabilities and a Gantt chart outlining the schedule from 2024 to 2027. This comprehensive structure aids in planning and executing the installation, support, training, and cost assessment of the machinery. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 5 Context: # 8. Sonstiges - Sämtliche betriebs technischen Parameter müssen die Betriebsmittelvorschriften ITS Škoda Auto sowie die Sicherheitsnormen CSn erfüllen. - Der Lieferant hat alle Konstruktionen und technischen Lösungen noch vor dem Beginn der Herstellung mit den Fachbereichen ŠKODA AUTO AG zu konsultieren und genehmigen lassen. - Garantie mindestens 24 Monate im 3-Schicht-Betrieb. - Mit dem Angebot ist ein 2D-LAYOUT in den Formaten PDF und DWG vorzulegen. - Bauffandament, Medienanschlüsse bis zum Hauptsperrventil an der Grenze des Arbeitsplat zes stellt Škoda bereit. Die restlichen Vertailungen besorgt der Auftragnehmer. - Komplette Projektdokumentation wird der Liefertant 1 Monat nach Vertragsabschluss liefern. - Die erste Betriebsstofffüllung zum Schmieren der Anlage gehört zum Lieferumfang. - Das Werkzeug wird anhand der Unterlagen des Maschinenherstellers und der gegenseitigen Abstimmung mit Škoda sichergestellt. - Dokumentation in tschechischer Sprache gemäß ITS ŠKODA (2 Ausdrucke + 1 digitale Form + Erklärung über den ordnungsgemäßen Erwerb von Softwarelizenzen). - Um einen Vertrag zu erhalten, ist eine Vertraulichkeitsvereinbarung (NDA-Vertrag mit ŠKODA AUTO AG) und eine entsprechende TISAX-Zertifizierung erforderlich. - Lieferbedingungen DDUDAP (einschließlich Zusammenlegung, Vermessung und Anbringung vor Ort) # 9. Anlagen 1. **ITS/Betriebs mittelvorschriften ŠKODA AUTO a.s.:** [Link zur Quelle](https://its.volkswagen.de/one-kbp/content/es/kbp_private/information_1/divisions/procurement/terms_and_conditions_of_purchasin g/new_koda_auto_a_s_4/koda_auto_a_s.jsp) 2. **Energi Ğ Škoda** - separate Datei 3. **Stiierung in der Halle** 4. **Visualisierung der Teile, Grundmaße** 5. **Schema des technologischen Prozesses** 6. **Unterlage Solutions für Powertrain Volkswagen Group Components Global Differenzbeschreibung** - per separate Datei 7. **3D Daten von Gussstück und des bearbeiteten Teils** - werden per Ebox zugesandt 8. **Zeichnungen des bearbeiteten Teils** - per separate Datei 9. **Interne Richtlinie der Komponenten** - per separate Datei 10. **Norm TQS 02.09** - separate Datei 11. **Norm VW 101 30** 12. **Norm WSK 016_862_G (Anforderungen zu Dichtungsflächen)** 13. **Kapazitätsanforderungen in Jahren** 14. **Erforderliches Schema der Spannung** - separate Datei Image Analysis: ### Analysis of the Attached Visual Content #### 1. Localization and Attribution: - **Page 1: A single-page document** #### 2. Object Detection and Classification: - **Detected objects:** Text, a hyperlink, bullet points, headings, PDF annotation elements (e.g., highlights and checkmarks). #### 3. Scene and Activity Analysis: - **Scene Description:** The scene depicts a document page, primarily text-oriented, with organized headings, bullets, and highlighted sections. No physical activities are depicted, as it is a print document. - **Main Actors and Actions:** Not applicable in this context as the document is text-based with no depiction of human activities. #### Text Analysis: - **Detected Text:** - **Main Headings:** - 8. Sonstiges (Miscellaneous) - 9. Anlagen (Attachments) - **Subsections and Bullets:** - Various detailed instructions and conditions relevant to Skoda Auto manufacturing, and PDF links to external resources. - **Highlight and Annotations:** - Highlights on specific important text portions in yellow and some text with green highlights. - PDF annotation checkmarks and certain lines underlined for emphasis. - **Text Significance:** - **Construction and Safety:** Key points cover the technical parameters, safety requirements, documentation language requirements, and contractual obligations. - **Main Points in Detailed Bullets:** - Guarantee for operation. - Delivery conditions including documentation in Czech. - Requirements for media and interfaces. - Conditions for lubrication and project documentation. - Various other procedural requirements. - **Highlighted Sections:** - Points emphasizing key requirements for tools usage and documentation specifics in Czech for Skoda. #### 5. Diagram and Chart Analysis: - **Diagrams and Charts:** There are no diagrams or charts included in the visible section of the document. #### 6. Product Analysis: - **Products Depicted:** No specific products are illustrated in the document. #### 7. Anomaly Detection: There are no noticeable anomalies or unusual elements within the provided text section. #### 8. Color Analysis: - **Color Composition:** - Dominant use of black text. - Yellow highlights indicating importance. - Green highlighted text emphasizing special sections. - The overall effect directs attention to the highlighted important notes. #### 9. Perspective and Composition: - **Perspective and Layout:** - The page is presented from a straightforward, upright perspective typical of a scanned or digital document. - **Composition:** - Text is well-organized with clear heading hierarchy, bulleted lists, and highlights to draw attention to essential details. #### 14. Process Descriptions: - **Brief Description:** Various processes are described, including the lubrication of equipment, project documentation timelines, and roles of delivery parties. #### 16. Tabellen (Tables): - Individual tables are not present, but bulleted lists organize the document’s contents. #### Typen Bezeichnung (Type Designations): - Specific type designations for norms and standards are mentioned, like "Norm TQS 02.09" and "Norm VW 101 30." #### Conclusion: The document is a detailed procedural and requirement-oriented text about Skoda Auto’s manufacturing and operational guidelines, notable for its clear organization and specific itemized tasks. The use of highlights enhances the focus on critical points, ensuring essential elements stand out. This organization reflects the importance of accuracy and adherence to protocols in manufacturing processes. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 6 Context: # 10. Kontaktperson ## Ing. Georgy Komarov, PPK-E – Plánování výroby polotovarů ŠKODA AUTO a.s., třída Václava Klementa 869, 293 01 Mladá Boleslav II, Czech Republic M: +420 730 865 237 [Georgy.Komarov@skoda-auto.cz](mailto:Georgy.Komarov@skoda-auto.cz) [www.skoda-auto.com](http://www.skoda-auto.com) ## Ing. Roman Taneček, PPK-E – Plánování výroby polotovarů ŠKODA AUTO a.s., třída Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic T: +420 326 8 14752, F: +420 326 8 17720, E: +420 326 8 45848, M: +420 604 292 729 [Roman.Tanecek@skoda-auto.cz](mailto:Roman.Tanecek@skoda-auto.cz) [www.skoda-auto.com](http://www.skoda-auto.com) Image Analysis: ### 1. Localization and Attribution - **Image 1**: Located on a single page. - Assigned as Image 1. ### 4. Text Analysis - **Detected Text**: - "10. Kontaktperson" - "Ing. Georgy Komarov, PPK-E - Plánování výroby polotovarů" - "ŠKODA AUTO a.s., tř. Václava Klementa 869, 293 01 Mladá Boleslav II, Czech Republic" - "M +420 730 865 237" - "Georgy.Komarov@skoda-auto.cz, www.skoda-auto.com" - "Ing. Roman Taneček, PPK-E - Plánování výroby polotovarů" - "ŠKODA AUTO a.s., Tř. Václava Klementa 869, 293 60 Mladá Boleslav, Czech Republic" - "T +420 326 8 14752, F +420 326 8 17720, ef +420 326 8 45848, M +420 604 292 729" - "Roman.Tanecek@skoda-auto.cz, www.skoda-auto.com" - **Analysis of Text Content**: - This section appears to list contact persons involved in planning the production of semi-finished goods for the company ŠKODA AUTO a.s. - The text provides detailed contact information for two individuals, including names, titles, physical addresses, phone numbers, and email addresses. - The inclusion of the company's website suggests that additional information about their services and products can be found online. ### 8. Color Analysis - **Dominant Colors**: - The text is primarily black on a white background. - The only other visible color is orange/yellow used to highlight some text in the header (e.g., "BN3888/P38/2014"). ### 9. Perspective and Composition - **Perspective**: - The image appears to be taken from a straightforward, eye-level perspective, ensuring easy readability. - **Composition**: - The design is minimalistic, with the text centrally aligned on a white background, focused on delivering clear contact information. - There is a blend of bold and regular fonts to differentiate headers from contact details, enhancing readability. ### 11. Metadata Analysis - **Metadata Information**: - The page displays “6/10” in a small font at the bottom, indicating it is part of a larger document, specifically page 6 of a total of 10 pages. - The term "INTERNAL" near the bottom left might indicate that this document is intended for internal use within the organization. ### Contextual Significance - **Overall Contribution**: - As part of a larger document, this page likely functions as a resource guide or directory within a professional or corporate context. - It aids in facilitating communication and coordination by providing detailed contact information for key individuals in the planning department at ŠKODA AUTO a.s. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 7 Context: # Anlage Nr. 3 – Stilllegung in der Halle ## Projekt - **SHP:** SSP - **Kunden-Nr.:** 118051 Bratislava - **Client-Id:** HRSB2BK/04 - **Datum:** ## Kontakt - **Projektleiter:** Konzern Taneček - **Telefon:** +420 736 863 237 - **Telefon:** +421 2 5828 1472 ## Standortskizze Die Bearbeitungslinie ist blau markiert. Voraussichtliche Maße der Bearbeitungslinie betragen ca. 15 m x 40 m. ``` ~40 m ``` ``` ~15 m ``` Image Analysis: **Image Analysis:** 1. **Localization and Attribution:** - **Image 1** is the sole image on the page and occupies the entire space available. 2. **Scene and Activity Analysis:** - The scene depicts a layout of an industrial hall for manufacturing electric motors (Elektromotorik SSP). Various sections of the hall are marked with different colors indicating distinct processing areas. - **Main Sections:** - **Blue Sections:** - AF50 Mechanische Bearbeitung (Mechanical Processing) - **Green Section:** - AF55 Waschen (Washing) - **Red Section:** - AF85 Endkontrolle (Final Control) - **Green/Blue Section:** - AF80 Lecktesten Stopfen Dissemontage (Leak Testing, Plugging, Dismounting) - **Yellow Sections:** - Automatische Depalettierung (Automatic Depalletizing) - Automatische PalettierungVerpacken und Umreißen (Automatic Palletizing, Packaging and Strapping) - The layout includes machinery and equipment depicted within the zones for respective activities. 3. **Text Analysis:** - **Title:** - "Anlage Nr. 3 – Situierung in der Halle" (System No. 3 - Positioning in the Hall) - **Additional Information:** - **Marked Area:** - "Die Bearbeitungslinie ist blau markiert. Voraussichtliche Maße der Bearbeitungslinie betragen ca. 15 m x 40 m." (The processing line is marked in blue. The approximate dimensions of the processing line are about 15 m x 40 m.) - **Project Information:** - Project Name: "Bearbeitungslinie für Motorgehäuse für Elektromotorik SSP" - Various contact details and project identifiers are listed at the top. 4. **Diagram and Chart Analysis:** - The diagram is a floor plan that shows the spatial arrangement of different processing zones in an industrial hall. Each section is clearly labeled and color-coded for ease of understanding. - The dimensions provided (15 m x 40 m) help in understanding the scale of the processing line. 5. **Process Flows and Descriptions (Ablaufprozesse/Prozessbeschreibungen):** - The layout indicates a clear process flow starting from automatic depalletizing, going through mechanical processing, washing, leak testing, final control, and ending with automatic palletizing, packaging, and strapping. 6. **Type Designations (Typen Bezeichnung):** - Different types of activities are designated with specific task names and identified areas, such as AF50 for Mechanical Processing and AF55 for Washing. 7. **Color Analysis:** - **Dominant Colors:** - Blue: Indicates mechanical processing areas. - Green: Indicates the washing area. - Red: Indicates the final control area. - Yellow: Indicates both automatic depalletizing and palletizing/packaging/strapping areas. - The usage of different colors helps in quick identification and differentiating between various processing steps. 8. **Perspective and Composition:** - The image is presented from a top-down (bird’s eye view) perspective, showing the entire layout of the hall. - The composition is systematic and organized, with clear boundaries and labels for each section, which helps in understanding the flow and spatial distribution of the machinery and processes. 9. **Contextual Significance:** - The image is significant for understanding the layout and workflow in a production hall for manufacturing electric motor components. - It provides critical information for planning, installation, and operation of the manufacturing line, ensuring an efficient and organized placement of equipment. This detailed analysis covers various aspects of the provided visual content, focusing on the structure, processes, and organization within the industrial layout. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 8 Context: # Anlage Nr. 4 – Visualisierung der Teile, Grundmaße ## Gusstück ![Gusstück](path/to/gusstück_image.png) | Maß | Wert | |-----------|------------| | Breite | 468.640 mm | | Höhe | 534.681 mm | | Länge | 574.800 mm | ## Bearbeitetes Teil ![Bearbeitetes Teil](path/to/bearbeitetes_teil_image.png) | Maß | Wert | |-----------|------------| | Breite | 482.409 mm | | Höhe | 552.745 mm | | Länge | 575.212 mm | ## Kontaktinformationen - **Projekt:** SSP - **Mitarbeiter:** Milos Balenko - **Telefon:** +49 7368846337 - **Mobil:** +49 152 348 14752 --- INTERNAL 8/10 Image Analysis: ### Image Analysis #### 1. **Localization and Attribution:** - **Image 1:** - Located on the left side of the page. - **Image 2:** - Located on the right side of the page. #### 2. **Object Detection and Classification:** - **Image 1:** - Object detected: A engine housing part labeled "Gusstück." - **Category:** Mechanical component. - **Key Features:** - Metallic structure. - Multiple projections and indentations. - Measurement indications (483.400 mm, 503.683 mm). - **Image 2:** - Object detected: A processed engine housing part labeled "Bearbeitetes Teil." - **Category:** Mechanical component. - **Key Features:** - Metallic structure. - Additional drilled holes and machined areas compared to Image 1. - Measurement indications (482.899 mm, 502.785 mm). - Blue elements potentially indicating modifications or areas of interest. #### 3. **Scene and Activity Analysis:** - **Image 1:** - The scene shows a raw mechanical part (engine housing) likely used for engines or transmissions. - No activity, just presentation. - **Image 2:** - The scene shows the same part but in a processed state with additional features and modifications. - No activity, just presentation. #### 4. **Text Analysis:** - **Image 1:** - Detected text: "Gusstück," "483.400 mm," "503.683 mm." - **Significance:** Indicates measurements and identification of the raw part. - **Image 2:** - Detected text: "Bearbeitetes Teil," "482.899 mm," "502.785 mm." - **Significance:** Indicates measurements and identification of the modified part. #### 5. **Diagram and Chart Analysis:** - Not applicable. #### 6. **Product Analysis:** - **Image 1:** - Product: Raw engine housing part. - **Main Features:** Unprocessed metal, significant structure rigidity, and foundational characteristics. - **Materials:** Likely cast metal (aluminum or similar). - **Colors:** Grey metallic. - **Image 2:** - Product: Processed engine housing part. - **Main Features:** Additional machining, holes for mounting or other purposes. - **Materials:** Cast metal with machined areas. - **Colors:** Grey metallic with blue highlights indicating areas of modification or focus. #### 7. **Anomaly Detection:** - No noticeable anomalies in either image. #### 8. **Color Analysis:** - **Image 1:** - Dominant Color: Grey metallic. - **Impact on Perception:** Conveys the rugged and unfinished nature of the raw part. - **Image 2:** - Dominant Colors: Grey metallic and blue. - **Impact on Perception:** The blue color highlights modifications, drawing attention to areas of interest. #### 9. **Perspective and Composition:** - **Image 1:** - **Perspective:** Slightly elevated, perspective view. - **Composition:** Centered, focused on the overall shape and dimensions of the raw part. - **Image 2:** - **Perspective:** Slightly elevated, perspective view. - **Composition:** Centered, focused on the additional machining and modifications. #### 10. **Contextual Significance:** - The images contribute to illustrating the differences between raw mechanical parts and their processed states, likely related to a manufacturing or engineering context. #### 11. **Metadata Analysis:** - Not available. #### 12. **Graph and Trend Analysis:** - Not applicable. #### 13. **Graph Numbers:** - Not applicable. ### Additional Aspects: #### 14. **Ablaufprozesse (Process Flows):** - The images do not depict process flows but show the before and after states of components. #### 15. **Prozessbeschreibungen (Process Descriptions):** - The images implicitly describe the processing of metal parts from raw to finished states. #### 16. **Typen Bezeichnung (Type Designations):** - **Gusstück:** Raw cast part. - **Bearbeitetes Teil:** Processed/machined part. #### 17. **Trend and Interpretation:** - There is a trend of transitioning from raw cast components to machined parts which highlights improvements in precision and readiness for assembly. #### 18. **Tables:** - Not applicable. These comprehensive analyses provide insight into the visualization of mechanical parts from their raw state to the processed state, essential for manufacturing and engineering documentation. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 9 Context: # Anlage Nr. 5 – Schema des technologischen Prozesses ## Gießen | | | |-----|-----------------------| | AF2 | Schmelzen | | AF5 | Gießen inkl. Lagerbuchse | | AF20 | Strahlen | | AF50 | Fertigbearbeitung | ## Endoperationen | | | |-----|--------------------------| | AF5 | Waschen | | AF80| Leketten + Stopfen + Diemontage | | AF85| Endkontrolle | Die Anzahl der Bearbeitungszentren ist schematisch dargestellt. --- **Hinweis**: - Mimo rozsah dodatków (Gray) - Rozsah dodatków dle TZ (Blue) Tel.: +49 7368 62337 +49 123 628 14752 INTERNAL Image Analysis: ### Image Analysis #### Image 1 1. **Localization and Attribution** - There is only one image on the page. - Image number: 1 2. **Object Detection and Classification** - The image is a process flow diagram. - Objects detected: Various gray and blue boxes connected by horizontal lines, labeled with text. 3. **Scene and Activity Analysis** - The scene depicts a technological process flow for metallurgical processing, likely related to electromotor housings as suggested by the heading. - Activities include melting (Schmelzen), casting and bushing (Giessen inkl. Lagerbuchse), blasting (Strahlen), finishing (Fertigbearbeitung), washing (Waschen), and quality control steps such as leak testing and dismantling (Lecktesten/Stopfen/Diesmontage), impregnation (Impraegnierung), and final inspection (Endkontrolle). 4. **Text Analysis** - The header text indicates this is "Anlage Nr. 5 -- Schema des technologischen Prozesses," translating to "Plant No. 5 -- Schematic of the Technological Process." - Specific process steps are labeled as: - AF2 Schmelzen (Melting) - AF5 Giessen inkl. Lagerbuchse (Casting including bushing) - AF20 Strahlen (Blasting) - AF50 Fertigbearbeitung (Finishing) - AF55 Waschen (Washing) - AF80 Impraegnierung (Impregnation) - AF85 Endkontrolle (Final Inspection) 5. **Diagram and Chart Analysis** - This process flow chart presents a sequence of stages in the technological processing of a material. - The horizontal layout shows the progression from left to right with input starting on the left side and outward flow on the right. - Grey boxes represent regular process steps while blue boxes indicate areas of significant intervention (labeled "Rozsah dodávky dle TZ"), suggesting some form of quality or technological zones. - A legend is provided at the bottom right: - Grey boxes: "Mimo rozsah dodávky" - Blue boxes: "Rozsah dodávky dle TZ" 6. **Ablaufprozesse (Process Flows)** - The diagram depicts a clear sequence of process flows: - Starting from AF2 (Melting), the material passes through AF5 (Casting), AF20 (Blasting), AF50 (Finishing), AF55 (Washing), AF80 (Impregnation), and finally AF85 (Final inspection). - The chart shows a detailed manufacturing process with key operations that ensure the quality and functionality of the electromotor housings. 7. **Prozessbeschreibungen (Process Descriptions)** - Each labeled step indicates a critical process in the production line: - AF2 Schmelzen: Involves melting the raw materials, likely the initial step. - AF5 Giessen inkl. Lagerbuchse: Casting the molten material into molds and inserting bushings. - AF20 Strahlen: Blasting to remove surface contaminants and prepare for further processing. - AF50 Fertigbearbeitung: Finishing operations to achieve the required precision and quality. - AF55 Waschen: Washing to clean the parts. - AF80 Impraegnierung: Impregnation to enhance materials’ properties. - AF85 Endkontrolle: Final inspection to ensure product quality before dispatch. 8. **Color Analysis** - The image uses a predominantly grey color scheme with some specific blue boxes highlighting important stages. - Dominant colors: - Grey: Represents standard process steps. - Blue: Represents a particular significance or focus as per the legend "Rozsah dodávky dle TZ". - The use of color helps to easily distinguish between different process stages and emphasizes specific zones. 9. **Perspective and Composition** - The diagram is presented from a straight-on perspective. - The layout is linear and horizontal, ensuring a clear understanding of the process flow from start to finish, with critical steps highlighted in detail. 10. **Contextual Significance** - In the context of a document or website, this image provides a clear schematic for the technological process involved in producing electromotor housings. - It gives insight into the complexity and thoroughness of the operations, emphasizing quality control and precise manufacturing steps. - This contributes significantly to the overall theme of manufacturing efficiency and quality assurance. The detailed breakdown should offer a comprehensive understanding of the diagram and the technological process it represents. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf Page: 10 Context: # Anlage Nr. 13 – Kapazitätsbedarf in Jahren ## Daten | Jahr | Kapazitätsbedarf (KAPA 250AT) | Kapazitätsbedarf (KAPA 309AT) | Bedarf MGH | |------|-------------------------------|--------------------------------|------------| | 2027 | 130.154 | | | | 2028 | 188.000 | | | | 2029 | 188.000 | | | | 2030 | 188.000 | | | | 2031 | 188.000 | | | | 2032 | 188.000 | | | | 2033 | 282.000 | | | | 2034 | 94.000 | | | ## Hinweise - **232.000** ist der festgelegte Kapazitätsbedarf. - **Legende:** - *KAPA 250AT*: Rote Linie - *KAPA 309AT*: Gepunktete Rote Linie - *Bedarf MGH*: Grüne Balken Image Analysis: ### Localization and Attribution: - **Image 1**: There is only one image on the page. ### Object Detection and Classification: - **Image 1**: - **Objects**: - Bar chart - Legends - Text ### Scene and Activity Analysis: - **Image 1**: - **Scene**: The image depicts a bar chart illustrating capacity requirements over multiple years. - **Activities**: Visualization of capacity requirements data for the years 2027 through 2034. ### Text Analysis: - **Image 1**: - **Detected Text**: - Title: "Anlage Nr. 13 – Kapazitätsbedarf in Jahren" - Side Labels: "LH-Gegenstand," "Projekt," "Nächst-Ort," "Klaüsberie," "Datasum," "HBS/EB/2023/O/4," "Datum 01/01/2023," "Zuweisung," "Projektant," "Telefon" etc. - Bar Chart Data (Years and Values): "130 154" (2027), "188 000" (2028 - 2032), "282 000" (2033), "94 000" (2034) - Legends: "KAPA 250AT" (red solid line), "KAPA 309AT" (red dashed line), "Bedarf MGH" (dark green bars). - **Explanation**: - Title describes the chart as "Capacity Requirements in Years." - The text represents the project identifier, data description, and contact information. - Legends indicate different capacity lines and their thresholds. ### Diagram and Chart Analysis: - **Image 1**: - **Axes**: - **X-Axis**: Year (2027–2034) - **Y-Axis**: Capacity values (0–300,000) - **Legends**: - "KAPA 250AT" – solid red line, - "KAPA 309AT" – dashed red line, - "Bedarf MGH" – dark green bars. - **Trend**: - Capacity requirements are relatively stable between 2027 and 2032 at around 188,000 units, with an exception in 2027 and a peak in 2033 (282,000 units), decreasing sharply in 2034 (94,000 units). - **Data Points**: - **2027**: 130,154 units - **2028 - 2032**: 188,000 units each year - **2033**: 282,000 units - **2034**: 94,000 units ### Color Analysis: - **Image 1**: - **Dominant Colors**: Dark green (bars), red (lines), and white (background). - **Impact**: The dark green bars effectively highlight the capacity requirements, while the red lines draw attention to the different capacity levels. ### Perspective and Composition: - **Image 1**: - **Perspective**: Frontal view of the bar chart. - **Composition**: Structured with clean lines, clear labeling, and a direct comparison of capacity levels across different years. ### Contextual Significance: - **Image 1**: - **Context**: Appears to be part of a project report or a presentation detailing capacity planning over the next several years. - **Contribution**: Provides a clear visual representation of capacity planning, aiding strategic decision-making. ### Graph and Trend Analysis: - **Image 1**: - **Trends**: - Consistently stable capacity requirement of 188,000 units from 2028 to 2032. - Significant increase to 282,000 units in 2033 before sharply decreasing to 94,000 units in 2034. - **Significance**: Indicates potential periods of increased demand and possible overcapacity or undercapacity periods requiring strategic adjustments. ### Graph Numbers: - **Image 1**: - **Data Points**: - 2027: 130,154 units - 2028: 188,000 units - 2029: 188,000 units - 2030: 188,000 units - 2031: 188,000 units - 2032: 188,000 units - 2033: 282,000 units - 2034: 94,000 units #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 1 Context: # TECHNICKÉ ZADÁNÍ **LASTENHEFT** --- **Předmět TZ** **Verze od 23.08.2024** **Linka obrábění motorové skříně elektropononu SSP** --- **Vypracoval** | **Oddělení** | **Datum** | **Podpis** --- | --- | --- | --- G. Komarov | PPK-E | | --- **Schválil** | **Oddělení** | **Datum** | **Podpis** --- | --- | --- | --- R. Taneček | PPK-E | | Z. Nekola | PPK | | J. Paldus | PKG/1 | | R. Schrom | PKG/4 | | M. Kargl | PKT/42 | | M. Adamec | PKG/3 | | J. Johan | PKT/3 | | Z. Chytka | PKT/14 | | K. Tlášek | PKT/1 | | J. Cikler | GQH-1/4 | | M. Repš | GQH-3 | | J. Beneš | PKT/2 | | M. Janata | PSZ/11 | | R. Chudoba | PKT | | J. Nohejl | PSU | | 1 / 9 INTERNAL Image Analysis: ## Analysis ### 1. Localization and Attribution - **Image 1**: The provided image comprises a header section, main title section, and a table at the bottom. ### 4. Text Analysis - **Header Section:** - Project Information: “Technické ZADÁNÍ LASTENHEFT,” “Datum: 23.08.2024,” etc. - Key identifiers include project name, version date, and contact information. - **Main Title Section:** - Title: “TECHNICKÉ ZADÁNÍ LASTENHEFT,” meaning "Technical Specifications Requirements Sheet." - Sub-title: “Předmět TZ Linka obrábění motorové skříně elektropohonu SSP,” meaning "Subject TZ Line for machining electric motor cases SSP." - Highlighted in Yellow: “Verze od 23.08.2024,” meaning "Version from 23.08.2024." - **Table Section:** - Header in two languages: Czech and German, indicating a multilingual document. - Table Columns: - Vypracoval (Erarbeitet): Prepared by - Oddělení (Abteilung): Department - Datum: Date - Podpis (Unterschrift): Signature - Rows include names, department codes, and spaces for dates and signatures. Names range from G. Komarov to J. Nohejl, each associated with unique department codes like PPK-E, PKG/1, and PKT/42. ### 6. Product Analysis - **Document and Product Details:** - The document refers to a technical requirements sheet related to the line for machining electric motor cases for the SSP (possibly a company or product name). ### 8. Color Analysis - **Dominant Colors:** - Background is predominantly white for clarity. - Text is primarily black, with specific highlights in yellow (important dates and version information). - The table borders are black, ensuring the information is well-organized. ### 9. Perspective and Composition - **Perspective:** - The image is a flat, head-on view of a document. - **Composition:** - The document is well-organized with a clear hierarchy. The header contains project-specific information, followed by a main title section clarifying the document's purpose. The table at the bottom is neatly structured for readers to input necessary details. ### 10. Contextual Significance - **Context:** - The document appears to be part of a technical manual or project documentation, crucial for tracking responsible personnel and departmental approvals. - **Contribution to Overall Message:** - Serves as a formal listing and approval document for the specified task (machining electric motor cases). ### 12. Graph and Trend Analysis - **Table Analysis:** - Each row in the table lists contributors and approvers for the project with respective department affiliations and spaces for dates and signatures. This suggests meticulous tracking and accountability in the project's execution phases. ### 13. Graph Numbers - **Table Entries:** - Row 1 (Prepared by): G. Komarov, PPK-E. - Subsequent rows list multiple approvers from different departments without date and signature entries. ### Additional Aspects - **Ablaufprozesse (Process Flows):** - Not explicitly detailed within the provided document. - **Prozessbeschreibungen (Process Descriptions):** - The process involves preparation and approval of technical documentations by various departments and individuals. - **Typen Bezeichnung (Type Designations):** - Various departments and their codes (e.g., PPK-E, PKG/1, and PKT/42) are mentioned, indicative of an organized type designation system within the entity. - **Trend and Interpretation:** - The inclusion of specific dates and signatures spaces indicates a formal review and approval process. ### Conclusion This image illustrates a technical document crucial for project management and accountability within an industrial or engineering project. It contains structured information and is designed for clarity, ensuring that all involved parties are properly documented and organized. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 2 Context: # 1. Předmět zadání Obráběcí linka motorové skříně elektroponu SSP. ## 2. Údaje o zpracovávaném dílu - **Název dílu:** Motorgehäuse SSP HA LK3,4 - **Číslo výkresu:** OQA.901.108 - **Hmotnost obrobeného dílu:** 14,975 kg (z toho Lagerhubu 0,369 kg) - **Hmotnost polotovaru:** cca 18 kg - **Materiál:** - Gehäuse OQA 901 108 - EN AC - 460000 - AISi9Cu3 (Fe) - Lagerbusch OQA 901 261 A DIN 30910-SINT-D-11 - **Základní rozměry:** - viz výkres ## 3. Požadované funkce zařízení 3.1 Zajištění zpracování údajů nátisku dle výkresu OQA_901_108-spsha_mg.rw (viz příloha č. 6). 3.2 **Výstupní stav dílu – odtlitek (vysokotlaké těsnění) – viz 3D data (příloha č. 7).** Výkres olit ne nížší tepelné zpracování poze. Obecně se dá počítat s tolerancemi dle ISO 8062-3 – DCTG7 – GCTG3. 3.3 Výstupní stav dílu – opracovaný díl – viz výkres (příloha č. 8). 3.4 Schéma procesu a rozsah dodávky viz příloha č. 5. ## 4. Požadavky na provedení zařízení 4.1 Moduliní linka obráběcích center zřetězených portálem. **Obráběcí centra (moduly) a portály budou stavěny postupně dle harmonogramu – viz bod č. 7.** 4.2 Linka má mít SPC místa, která umožní odběr dílu po merká a vložení zpět do toku po každé operaci. 4.3 Transport dílu k místu předání pod portál pomocí pevného dopravníků. Pro potřebu transportním přípravku dle doporučení dodavatele linky a technických možnosti plochy zařízení. **Rozhraní mezi linkou a zřetězením před a po Škodě.** - **Nakládka** – dodávka dodavatelé linky - **Dopravník** – dodávka od Škoda Auto a.s. 4.4 Obrábění (celý proces) s chladicí kapalinou (emulze) je preferováno a doporučeno – specifikace emulze dle Škoda. 4.4.1 Nacení rozhraní s emulzí centrálu (dodávka emulze centrála ze strany Škoda Auto a.s.). - **Specifikovat požadované množství emulze (l/min)** Image Analysis: ### Comprehensive Analysis of the Visual Content #### Localization and Attribution - **Text Segment (1):** Located at the top part of the page, outlining various headings and subheadings numbered 1 to 4. - **Diagram (Image 1):** Located towards the bottom-left of the layout, depicting a process flow. - **Visualization (Image 2):** Positioned right below Diagram (Image 1) and represents machine module arrangement. #### Object Detection and Classification **Text Segment (1):** - Objects: Headings and written content. - Categories: Title headings (e.g., "Předmět zadání"), subheadings (numbered points), and body text. **Diagram (Image 1):** - Objects: Rectangles with labels, arrows and text annotations. - Categories: Process flow elements (e.g., "Nadkladac," "Dopravník"). **Visualization (Image 2):** - Objects: Rectangular modules labeled as "KSS" and "BAZ". - Categories: Machine components, connections between them. #### Scene and Activity Analysis **Text Segment (1):** - Scene: Professional technical document with detailed instructions and specifications. - Activity: Explanation of processes, requirements, and functionalities of a machining line for motor casing of electric drives. **Diagram (Image 1):** - Scene: Schematic representation of logistics and process flow. - Activity: Explanation of material handling (e.g., "Nadkladac–dodávka dodavatele linky," "Dopravník–dodávka Škoda Auto a.s."). **Visualization (Image 2):** - Scene: Diagram of a modular machining/link system labeled. - Activity: Illustration of the emulsion central and specific modules/modules emplacement within the supplier chain. #### Text Analysis **Detected Text:** 1. **Předmět zadání:** Obráběcí linka motové skříně elektropohonu SSP. - Significance: Defines the subject of the document. 2. **Požadované funkce zařízení:** Sections from 3.1 to 3.4 detailing various functionalities required of the machinery. - Significance: Lays out precise operating requirements and stages. 3. **Požadavky na provedení zařízení:** Sections from 4.1 to 4.4 providing operational requirements, process recommendations, and specifications. - Significance: Details setup and material handling prerequisites. #### Diagram and Chart Analysis **Diagram (Image 1):** - Content: Process flowchart involving modules labeled "NAZ" and "BAZ." - Analysis: - “Nadkladac” and “Dopravník” as delivery entities from suppliers. - Shows a step-by-step flow from "Rozhraní mezi linkou a zřetězením" explaining the integration between delivery processes from both supplier and Škoda Auto’s components. **Visualization (Image 2):** - Data: Modular arrangement with emphasis on central emulsion specifics. - Analysis: - Depicts specific emulsion and the quantities needed per the corporate standards. - Spatial distribution of "KSS" central emulsion and "BAZ" machinery alignment within a factory setting. #### Product Analysis **Text Segment:** - Products: Mention of motor housing for electric drive. - Features: - Material specifications (e.g., Gehäuse OQA 901 108, EN AC - 46000 - AlSi9Cu3 (Fe)). - Weight and dimensions specified in the table format. **Visualization (Image 2):** - Main Feature: Emulsion central "KSS". - Comparison: Differences visualized in layout and integration of various modules (e.g., "KSS", "BAZ"). #### Anomaly Detection None detectable from the provided visual elements. #### Color Analysis **Diagram (Image 1):** - Dominant Colors: Shades of green and turquoise. - Impact: Clearly distinguishes between delivery responsibilities, enhancing readability. **Visualization (Image 2):** - Dominant Colors: Light blue shades. - Impact: Highlighting various system components and connections, focusing attention on emulsion delivery specifics. #### Perspective and Composition **Diagram (Image 1):** - Perspective: Top-down technical schematic view. - Composition: Modular, clean arrangement for easy understanding of process flow. **Visualization (Image 2):** - Perspective: Top-down/block layout. - Composition: Simple, segmented blocks with clear labeling for rapid comprehension of module setup. --- This detailed examination of the visual content analyzes multiple facets from localization to manuscript detailing, pointing out the intended purpose and operational context within the document. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 3 Context: ``` # Předmět T2 Linka obrušovací motorové šikmé elektropropotou SSP ## 4.4.2 OPCE nabídnout ke každému stroji zařízení pro filtraci a temperování emulze + transport třísek pomocí dopravníku (výška vynášecí třísek 1.500 mm) ![KSS](image_url) ## 4.5 OPCE nabídnout variantu kombinace MMS a KSS ### 4.5.1 Operace předobrábění - Bude použita technologie minimálním primázních (MMS/MQL) - Transport třísek pomocí dopravníku (výška vynášecí třísek 1.500 mm) ### 4.5.2 Operace obrábění naisto - pod chladicí kapalinou (ke každému centru nabídnout zařízení pro filtraci a temperaci emulze) - Transport třísek pomocí dopravníku (výška vynášecí třísek 1.500 mm) ## 4.6 Stroje mají být připraveny pro napojení z horní strany na zařízení na odsávání a filtrace. Zařízení odsávání a filtrace je mimo rozsah dodávky a bude dodáno ze strany ŠKODA AUTO a.s. Specifikovat požadovaný výkon/ množství odsávaného vzduchu (m³/hod) ## 4.7 OPCE Nabídnout odsávání a filtrace ve. portbuli ## 4.8 Přejímka dle TQS O2.09 a VV 101 30 – viz přílohy č. 10 a 11. ## 4.9 Požadovaná schéma unput viz příloha č. 14. ## 4.10 Rizeni Siemens – požadavky na řizeni viz příloha č. 6. ## 4.11 Na začátku linky musí být 2 stacionární kamery na čtení DMC kódů, dle každém SPC musí jedna ruční čtečka DMC. ``` Image Analysis: ### Comprehensive Examination of the Visual Content #### 1. **Localization and Attribution** - **Image 1**: Positioned at the top of the page. - **Image 2**: Positioned below Image 1, in the middle of the page. #### 2. **Object Detection and Classification** - **Image 1**: - Objects: Diagram containing blocks and arrows. - Key Features: Blue and grey blocks representing different components. Blue arrows indicating direction of material flow. Text annotations for contextual information. - **Image 2**: - Objects: Similar to Image 1, contains a diagram with blue and grey blocks and arrows. - Key Features: Representing a combination of MMS and KSS processes, with blue representing Lieferumfang des Lieferanten and grey representing Lieferumfang Škoda Auto a.s. #### 3. **Scene and Activity Analysis** - **Image 1**: - Scene: Schematic representation of a machine configuration with labeled sections. - Activities: Indicating filtration and transport processes for metal shavings. - **Image 2**: - Scene: Another schematic, showing a combination of MMS and KSS workflows. - Activities: Similar to above, focusing on the operational steps in pre-working and machining. #### 4. **Text Analysis** - **Text in Header**: - "Předmět TZ, Linka obrábění motorové skříně elektropohonu SSP, ..." - Significance: Provides the title, project details, and contact information. - **In Image 1**: - "4.4.2 OPCE nabídnout ke každému stroji zařízení pro filtraci a temperování emulze + transport třísek pomocí dopravníku..." - Explanation: Instructions about offering equipment for filtration and temperature control of emulsion and chip transport. - **In Image 2**: - "4.5 OPCE nabídnout variantu kombinace MMS a KSS..." - Explanation: Instructions regarding offering a combination of MMS and KSS processes. #### 5. **Diagram and Chart Analysis** - **Image 1**: - Diagram displays modular layout of a system with labeled utensils such as "Späneförderer" (chip conveyor) and "Dezentrale Emulsion Anlagen" (decentral emulsion systems). - Insight: Presents a clear layout of how each unit is connected and the flow of materials. - **Image 2**: - Similar layout, but with specific instructions regarding the use of MMS and KSS. - Insight: Demonstrates the arrangement of combined processes (MMS and KSS) within the system. #### 7. **Anomaly Detection** - No noticeable anomalies or unusual elements detected in both images. The diagrams and text appear consistent with the theme and purpose of the document. #### 8. **Color Analysis** - **Dominant Colors**: - Blue and Grey: Used to differentiate between "Lieferumfang des Lieferanten" and "Lieferumfang Škoda Auto a.s." - Impact: Clear visual differentiation aids in understanding the components provided by different entities. #### 9. **Perspective and Composition** - **Perspective**: Both images are laid out from a top-down perspective, typical for technical schematics. - **Composition**: Elements are arranged systematically, enhancing readability and comprehension. The use of color blocks and directional arrows helps in visualizing the workflow. #### 11. **Metadata Analysis** - No metadata visible in the scanned image content provided. #### 13. **Graph Numbers** - No detailed graph numbers visible in the provided content. ### Additional Aspects #### **Ablaufprozesse (Process Flows)** - **Image 1**: Illustrates the process flow from filtration to chip transport using conveyors. - **Image 2**: Demonstrates combined processes of MMS and KSS, showing the interaction between pre-working and fine-machining stages. #### **Prozessbeschreibungen (Process Descriptions)** - **Image 1**: Accompanied by textual instructions about filtration and chip transport. - **Image 2**: Describes the combination of MMS and KSS, offering detailed steps about the processes used in manufacturing. #### **Trend and Interpretation** - Indicates a trend towards integrated and automated solutions for material handling and filtration within manufacturing setups. #### **Tables** - Not applicable; there are no tables in the provided content. #### **Overall Analysis** - The diagrams and text effectively communicate technical instructions and layout plans for manufacturing processes. The use of color and systematic organization enhances understanding. These elements contribute significantly to the overarching theme of industrial manufacturing and process optimization. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 4 Context: # 5. Další požadavky 5.1 Stanoví nejkratší možný termín dodání 50 obrobených a proměnných vzorků, odpovídajících technické dokumentaci, od okamžiku objednání předmětu zadání. Zpracovat termínový plán na dodání vzorků a nacenit samostatné položky. 5.2 OPCE nářadí na 1 stroj/OP dle ITS 3.10. 5.3 OPCE nabídnout podporu po předání do provozu v rozsahu 1 pracovník/1 týden. 5.4 OPCE nabídnout školení. 5.5 Odhadnout životnost nástrojů a náklady na kus pro nástroje na obrábění Lagerbuchs. # 6. Požadavky na výkon zařízení | Parametr | Hodnota | |----------------------------------|-----------------------| | Kapacita | 232 000 ks/rok | | Takt linky | 75 s | | Denní pracovní doba | 22,5 h | | Pracovních dnů za rok | 250 dnů | | Technické výstupy | | | Zmetkovitost | | | Stabilita procesu – hodnocené parametry: | Viz standard ITS ŠKODA Auto | OPCE - 2. linka se stejnou kapacitou viz layout v příloze č.3 # 7. Harmonogram | Aktivita | 2024 | |-------------------------------------------------------|--------------| | Bestellungen | 0/1/25 | | Lieferung, Inbetriebnahme und Übergabe | A/14/26 | | 1TBAZ PRO + komplette Automatisierung | A/18/26 | | TBT-PVS | 0/7/26 | | PVS | 0/7/26 | | Nullserien | 4/7/26 | | Lieferung, Inbetriebnahme und Übergabe | 11/27 | | technische BAZ für erforderliche Kapazität | | | 2 Tage Produktion | | | SOP | | # 8. Ostatní - Veškeré technicko-provozní parametry musí splňovat ITS Škoda Auto a bezpečnostní normy ČSN. - Veškeré konstrukce a technická řešení je dodavatel povinen konzultovat a nechat schválit před zahájením výroby odbornými útvary ŠKODA AUTO a.s. - Záruka minimálně 24 měsíců s změnným provozu. - S nabídkou předložit layout 2D ve formátech PDF a DWG. - Stavební základ, energetické přípojky k hlavním uzávěrům na hranici pracoviště Škoda, ostatní rozvody zajistí dodavatel. - Kompletní projektní podklady dodá dodavatel 1 měsíc po uzavření smlouvy. - První návrh prostředků pro mazání stroje zajistí dodavatel. Image Analysis: ### Image Analysis #### Localization and Attribution: - **Image Location**: There is a single composite image on the page. - **Image Number**: Image 1. #### Text Analysis: The image contains several sections with distinct text. Below is the extracted and analyzed text: 1. **Header Information**: - **Title**: Produkt TZ - **Subtitle**: Linka obrábění motorové skříně elektroposopnou SSP - **Identifiers**: - Firma: ŠKODA AUTO a.s. - Hauptabteilung: SSP - Datum: [Blank] 2. **Section 5: Další požadavky (Additional Requirements)**: - 5.1: Stanovite nejkkatší možny termín dodání 50ubrobených and proměřených vzorků... - Summary: Set the shortest possible delivery time for 50 machined and measured samples. - 5.2: OPCE nářadí na 1 stroj/OP dle ITS 3.10. - Summary: OPCE tooling for 1 machine/OP according to ITS 3.10. - 5.3: OPCE nabídnout podporu... - Summary: OPCE offer support... - 5.4: OPCE nabídnout školeni. - Summary: OPCE offer training. - 5.5: Odnadknout životnosti nástrojů... - Summary: Estimate the life of tools and costs for new tools for machining Lagerbuchse. 3. **Section 6: Požadavky na výkon zařízení (Performance Requirements for Equipment)**: - **Table**: - **Kapacita**: 232 000 ks/rok - **Takt linky**: 75 s - **Denní pracovní doba**: 225,8 h - **Pracovných dnů za rok**: 250 dní - **Technlcke vytížení**: 85 % - **Zmetkovitost**: 2 %: - **Stabilita procesu - hodnocené parametry**: Viz standardy ITS ŠKODA Auto 4. **Section 7: Harmonogram (Schedule)**: **Table**: - **Activity**: Sequence of activities from 2024 to 2027, including: - Bestellung - Lieferung, Inbetriebnahme und Übergabe - 1BAZ pro OP + komplette Automatisierung - TBT-PVS - PVS - Nullserie - Lieferung, Inbetriebnahme und Übergabe restliche BAZ für erforderliche Kapazität - 2 Tage Produktion - SOP 5. **Section 8: Ostatní (Others)**: Details operational and construction standards and requirements: - Compliance with ITŠ ŠKODA Auto and safety standards ČSN. - Coordination and approval requirements for technical solutions. - Warranty period of at least 24 months with 3-shift operation. - Layout requirements in PDF and DWG formats. - Supplier responsibilities for construction and technical connections. - Provision of project documentation within 1 month of contract conclusion. - Supplier's responsibility for machine lubrication. #### Diagram and Chart Analysis: - **Chart in Section 7**: - **Axes**: - Horizontal Axis: Years (2024-2027). - Vertical Axis: Activities related to Bestellung and commissioning for 1BAZ and other machines. - **Legend**: - Specific milestones and tasks for each year. - **Key Insights**: - Shows the timeline for activities ranging from ordering to production and SOP. - Specific action points are designated by red markings. #### Tables: - **Tables in Section 6 & 7**: - **Section 6**: Performance requirements for equipment, including capacity, operational pace, and quality metrics. - **Section 7**: Activities and milestones chart, displaying a timeline of key events and their intended dates. #### Trends and Interpretation: - **Operational Efficiency**: There is a focus on having high operational efficiency and minimized downtime, emphasized by parameters like takt time, daily working hours, and defect rate. - **Scheduling and Milestones**: The scheduled milestones signify a detailed plan for project management, focusing on achieving specific targets in defined timelines. Overall, the image portrays a structured overview relating to the planning and implementation of motor housing machining lines, including performance metrics, schedule, and additional requirements. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 5 Context: # Návod na základě podkladů od výrobce stroje a vzájemném odsouhlasení zajistit Škoda - Dokumentace v českém jazyce podle ITS ŠKODA (2 výtisky + 1 digitální forma + Prohlášení o řádném nabytí softwarových licencí). - Pro získání zakázky je potřebné mít závazek členitosti (NDA smlouva se ŠKODA AUTO a.s.) a odpovídající TISAX certifikáty. - Dodací podmínky DDU DAP (včetně složení, zaměření a ustavení na místě) ## 9. Přílohy 1. **Interní technický standard (ITS)/Betriebsmitteilungsverordnung ŠKODA AUTO a.s.:** [https://lso.volkswagen.de/one-kbp/content/cs/kbp/private/information_1/divisions/procurement/terms_and_conditions_of_purchasin g_new/_koda_auto_a_s_4/_koda_auto_a_s.jsp](https://lso.volkswagen.de/one-kbp/content/cs/kbp/private/information_1/divisions/procurement/terms_and_conditions_of_purchasin g_new/_koda_auto_a_s_4/_koda_auto_a_s.jsp) 2. **Energie Škoda – separátní příloha** 3. **Umístění v hale** 4. **Evaluace dt. Čísel a rozměry** 5. **Schéma technologického procesu** 6. **Technische Unterlage Solutions for Powertrain Volkswagen Group Components Global Differenzbeschreibung – separátní soubor** 7. **3D data odtisku a obrobeného dílu – budou zaslány Eboxem** 8. **Výkresy obrobeného dílu – separátní soubor** 9. **Interní směrnice komponentů – separátní soubor** 10. **Norma TQS 02.09 – separátní soubor** 11. **Norma VW 101 30** 12. **Norma WSK_016_862_G (Požadavky k technickým plochám)** 13. **Kapacitní požadavky v rocích** 14. **Požadovací schéma upnutí – separátní soubor** ## 10. Kontaktní osoba **Ing. Georgy Komarov, PPK-E – Plánování výroby polotovarů** ŠKODA AUTO a.s., třída Václava Klementa 869, 293 01 Mladá Boleslav, Czech Republic M +420 730 865 237 [Georgy.Komarov@skoda-auto.com](mailto:Georgy.Komarov@skoda-auto.com) [www.skoda-auto.com](https://www.skoda-auto.com) **Ing. Roman Tančev, PPK-E – Plánování výroby polotovarů** ŠKODA AUTO a.s., třída Václava Klementa 869, 293 01 Mladá Boleslav, Czech Republic T +420 326 814 752, F +420 326 8 17720, e-f +420 326 8 45848, M +420 604 292 729 [Roman.Tancek@skoda-auto.com](mailto:Roman.Tancek@skoda-auto.com) [www.skoda-auto.com](https://www.skoda-auto.com) Image Analysis: ### 1. Localization and Attribution - This is a single-page document with text content throughout. ### 4. Text Analysis #### Image Description - **Title:** The text at the very top-left corner appears to relate to "Product TZ", "Line for treating the internal surface of the electrical component SSP". - **Key Sections:** The document is composed of numbered sections and highlighted statements. #### Sections Breakdown 1. **Highlighted Texts:** - "Nářadí na základé podkladů od výrobce stroje a vzájemném odsouhlasení zajistí Škoda." - "Dokumentace v českém jazyce podle ITS ŠKODA (2 výtisky + 1 digitální forma + Prohlášení o řádném nabytí softwarových licencí)." - "Pro získání zakázky je potřeba mít závazek mlčenlivosti (NDA smlouva se ŠKODA AUTO a.s.) a odpovídající TISAX certifikát." - "Dodací podmínky DDU DAP (včetně složení, zaměření a ustavení na místě)" 2. **Section 9: Přílohy (Attachments):** - Listed attachments (each marked by a bullet point) with references to specific standards and documentation: - "Interní technický standard (ITS)/Betriebsmittelvorschriften ŠKODA AUTO a.s." - URLs provided for more detailed documentation. - Various norms and technical documents are referenced (e.g., ISO VW 101 30, Norma TQS 02.09, etc.). 3. **Section 10: Kontaktní osoba (Contact Person):** - Contact information for two individuals: - Georgy Komarov: Email, phone numbers, and titles. - Roman Taneček: Email, phone numbers, and titles. #### Analysis: - **Highlights:** The highlighted sections provide essential instructions and requirements for Skoda-related documentation and compliance. - **Attachments (Section 9):** Detailed technical and standard documents are referenced, suggesting the context is highly technical and adheres to specific industry standards. - **Contact Information (Section 10):** This section lists important contact details, facilitating communication regarding the document's content. ### 9. Perspective and Composition - **Perspective:** The document is viewed from a straight, eye-level angle, typical for reading documents. - **Composition:** The text is organized in a structured manner with sections numbered explicitly, highlighted key points, URL links, and contacts at the end. ### 10. Contextual Significance - This page is likely part of a larger technical or procedural document, perhaps aimed at compliance, legal or tender-related processes for Skoda Auto. - The document's format suggests it is used for formal communication, providing necessary guidelines and contact information for executing specific tasks. ### 13. Graph Numbers - No graphs or numeric data points are present in this image to analyze. ### Additional Aspects **Ablaufprozesse (Process Flows):** There are references to technological processes in the attachments, indicating process flow documentation. **Prozessbeschreibungen (Process Descriptions):** Several norms and standards are mentioned, which likely detail various processes in their respective documents. **Typen Bezeichnung (Type Designations):** Specific norms and documents (like Norma TQS 02.09) denote types and technical specifications. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 6 Context: # Příloha č. 3 – Umístění v hale Projekt: TZ Linka: Obráběcí linka motorové škatule oklepovacího SSP SŠP: SSP Místo: Bolechov Číslo: HBSRBSK/20A Datum: ***DATA*** ## Rozměry linky Modrou barvou je vyznačena obráběcí linka. Předpokládané rozměry obráběcí linky cca 15 m x 40 m. | | | |------------------|------------------| | AF50 | Mechanische Bearbeitung OPTION | | AF55 | Waschen | | AF80 | Leckstein Stoppen Diesmontage | | AF85 | Endkontrolle | | Automatische Palettierung | Verpacken und Entladung | | Automatisches Depalettieren | | - **Rozměry:** - ~15 m - ~40 m 69 INTERNAL. Image Analysis: ### Comprehensive Analysis of the Visual Content #### Image Details - **Image Number:** Image 1 #### 1. Localization and Attribution - **Image Position:** The image is located on a single page, with the title and other text components arranged around it. - **Numbering:** This is Image 1. #### 2. Object Detection and Classification The image depicts a detailed floor plan with various sections clearly labeled. Detected objects include: - **Machines:** Represented by icons within blue, green, and yellow shaded areas. - **Pathways/Connections:** These are depicted by black lines connecting different sections. - **Icons and Legend Elements:** Present at the top and bottom of the diagram for quick reference. #### 3. Scene and Activity Analysis - **Scene Description:** The image portrays a floor plan of a mechanical processing line in an industrial context. - **Main Sections:** - **AF50 Mechanische Bearbeitung** (OPTION and the main processing area) - **AF55 Waschen** (Washing area) - **AF80 Lecktesten; Stopfen; Demontage** (Leak testing, plugging, and disassembly) - **AF85 Endkontrolle** (Final inspection) - **Automatische Depalettierung** (Automatic depalletizing) - **Automatische Palettierung* Verpakken und Umreifen** (Automatic palletizing, packaging, and strapping) - **Activities Taking Place:** Indications suggest mechanical processing, washing, testing, depalletizing, inspection, and packaging. #### 4. Text Analysis - **Detected Text and Significance:** - **Top-left section:** Information about the project (e.g., Předmět TZ, Projekt, etc.) - **Mid-section:** Labels for each mechanical area/activity as mentioned above. - **Bottom-section:** "Modrou barvou je vyznačena obráběcí linka. Předpokládané rozměry obráběcí linky cca 15 m x 40 m." (Translation: The machining line is marked in blue. The estimated dimensions of the machining line are approximately 15 m x 40 m.) #### 5. Diagram and Chart Analysis - **Plan Details:** - **Axes and Measurements:** The area designated for each section includes approximate dimensions: 15 m x 40 m. - **Color Legend:** Various shaded regions demarcate different functional areas crucial for understanding the workflow. - **Process Flow Connectivity:** Black lines and green passage paths connect the areas. #### 8. Color Analysis - **Color Composition:** - **Blue Regions:** Indicate key machining areas. - **Green Regions:** Indicate washing area. - **Red Regions:** Indicate the final inspection area. - **Yellow Regions:** Indicate automatic depalletizing and palletizing areas. - **Impact on Perception:** Different colors are used to distinguish between different operations, aiding in visual clarity and compartmentalization. #### 9. Perspective and Composition - **Perspective:** The image is a top-down view (bird’s-eye view) of the layout. - **Composition:** The layout is organized with the central machining areas flanked by the washing areas on the right and depalletizing/palletizing areas on the left. This balanced composition aids in understanding the spatial organization and workflow. #### 12. Graph and Trend Analysis - **Trends and Insights:** - **Workflow Optimization:** The flow from machining to inspection, washing, and palletizing is laid out systematically to aid efficient workflow and minimize transit time between stages. - **Space Utilization:** Each area is clearly demarcated and utilized to ensure that all processes are streamlined and easily accessible. #### Ablaufprozesse (Process Flows) - **Description and Significance:** - The layout supports a clear flow from one stage of manufacturing to another, starting with the machining line (marked in blue), moving through washing, testing, and final inspection, and ending with packaging and palletizing. - **Efficiency:** The process flows support efficiency by minimizing bottlenecks and ensuring each process stage is logically connected. #### Prozessbeschreibungen (Process Descriptions) - **Details:** - **Machining (AF50):** The main mechanical processing area where initial machining steps are carried out. - **Washing (AF55):** Components are washed and prepared for further processing. - **Leak Testing (AF80):** Ensures no leaks in the components. - **Final Inspection (AF85):** Ensures the overall quality and integrity of the components before packaging. - **Depalletizing and Palletizing:** Automated systems manage the handling of materials for efficiency. #### Trend and Interpretation - **Workflow Trends:** The layout suggests a linear workflow designed to improve efficiency, reduce manual transport, and centralize quality control processes. ### Conclusion This image effectively communicates the layout and process flows of a mechanical processing line. Its structured design enhances understanding and operational planning, significantly contributing to efficiency and clarity in an industrial setup. The use of various colors and clearly labeled sections aids in quickly grasping the workflow and spatial organization, making it an indispensable part of the operational documentation. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 7 Context: # Příloha č. 4 – Vizualizace dílů, základní rozměry ## Odlitek | Rozměr | Hodnota | |----------------|-------------| | Zelená (mm) | 248.600 | | Červená (mm) | 562.688 | | Modrá (mm) | 534.040 | ## Opracovaný díl | Rozměr | Hodnota | |----------------|-------------| | Zelená (mm) | 542.489 | | Červená (mm) | 582.785 | | Modrá (mm) | 352.321 | * Kdykoliv potřebujete další informace, neváhejte kontaktovat oddělení. Image Analysis: ### Comprehensive Analysis #### 1. Localization and Attribution - **Image 1:** Located on the left side of the page. - **Image 2:** Located on the right side of the page. #### 2. Object Detection and Classification - **Image 1:** - **Object Detected:** A mechanical component, likely a cast part of an engine or transmission system. - **Key Features:** - Rectangular base structure. - Circular openings. - Fine grid-like texture. - **Image 2:** - **Object Detected:** A processed part, likely another stage of the same mechanical component seen in Image 1. - **Key Features:** - Similar rectangular base structure. - Circular openings with some additional blue markings indicating modifications or annotations. - Smoothened edges compared to Image 1. #### 3. Scene and Activity Analysis - **Image 1:** The scene shows a cast mechanical part undergoing initial measurements. - **Main Actors and Actions:** The primary focus is on the mechanical component and the measurement indicators. - **Image 2:** The scene depicts a processed version of the same mechanical part with additional annotations and measurements. - **Main Actors and Actions:** The mechanical part with highlighted modifications and measurement indicators. #### 4. Text Analysis - **Text Detected in Image 1 and Image 2:** - **Title:** "Příloha č. 4 - Vizualizace dílů, základní rozměry." - **Sub-headings:** - Left Image: "Odlietek" - Right Image: "Opracovaný díl" - **Measurements:** - Left Image: Green label: "492.400 mm", Blue label: "256.030 mm", Red label: "340.000 mm" - Right Image: Green label: "492.485 mm", Blue label: "256.231 mm", Red label: "340.000 mm" **Significance:** - The title indicates this is an attachment that visualizes parts and their basic dimensions. - The sub-headings differentiate the two states of the part: cast (Odlietek) and processed (Opracovaný díl). - The measurements illustrate the key dimensions of each state. #### 7. Anomaly Detection - The primary anomaly detected is the blue highlights in Image 2 that indicate additional modifications or annotations compared to Image 1. #### 8. Color Analysis - **Image 1:** Dominant color is gray, representing the raw metal surface of the cast part. - **Image 2:** Dominant color is gray with additional blue highlights indicating specific modifications or annotations. The blue color draws attention to parts that have undergone changes. #### 9. Perspective and Composition - **Perspective:** Both images are taken from an isometric viewpoint, offering a comprehensive 3D view of the mechanical parts. - **Composition:** - Image 1 and Image 2 are aligned horizontally side-by-side for comparison. - The measurements are clearly labeled with contrasting colors for easy identification. #### 12. Graph and Trend Analysis - **Measurements Comparison:** - **Left Image:** Showcasing a dimension trend of the cast part. - Width: 492.400 mm - Height: 256.030 mm - Depth: 340.000 mm - **Right Image:** Dimensional comparison after processing. - Width: 492.485 mm (slightly increased) - Height: 256.231 mm (slightly increased) - Depth: 340.000 mm (constant) **Significance:** The slight dimensional changes in the processed part indicate additional material handling after the casting process to meet precise specifications. ### Overall Contextual Significance - These images likely serve in a technical document or manual regarding the manufacturing process of mechanical parts. They illustrate the transition from a raw cast part to a processed component, highlighting the critical dimensional changes and modifications. ### Typen Bezeichnung (Type Designations) - "Odlietek" (Cast Part) - "Opracovaný díl" (Processed Part) By analyzing the visual content in these aspects, we provide a deep understanding of the mechanical parts' dimensional changes and the significance of these images in a manufacturing context. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 8 Context: # Příloha č. 5 – Schéma technologického procesu ## Gießen | Symbol | Proces | |-------------|-------------------------------| | AF2 | Schmelzen | | AF5 | Gießen inkl. Lagerbuchtse | | AF20 | Strahlen | | AF50 | Fertigung | ## Endoperationen | Symbol | Proces | |-------------|---------------------------------| | AF5 | Waschen | | AF80 | Lecktesten + Stoppen * DiMontage| | AF80 | Impregnierung | | AF5 | Endkontrolle | **Počet obráběcích center je uveden schematicky.** **Mimo rozsah dodávek**: ![Mimo rozsah dodávek](path/to/image) **Rozsah dodávek dle TZ**: ![Rozsah dodávek dle TZ](path/to/image) --- *Telefon*: +420 736 963 237 +420 312 628 1472 --- *Interní* Image Analysis: ### Image Analysis #### 1. Localization and Attribution: - **Document Title:** Příloha č. 5 – Schéma technologického procesu - **Page:** 8/9 - **Image:** Only one image on this page, so labeled as Image 1. #### 2. Object Detection and Classification: - **Objects Detected:** - Rectangular shapes representing various stages of a technological process. - Arrows indicating the flow direction from left to right. - Text labels inside and below the shapes describing each stage. - Two icons at the top-right and top-left corners. #### 3. Scene and Activity Analysis: - **Scene Description:** - The diagram depicts a technological process flow, divided into two main sections: Gießen (Casting) and Endoperationen (Final Operations). - **Activities:** - The process starts from AF2 Schmelzen (Melting), moves through AF5 Gießen inkl. Lagerbuchse (Casting incl. Bearing Bush) and several other stages, ending at AF85 Endkontrolle (Final Inspection). - Intermediate activities include Strahlen (Shot Blasting), Fertigbearbeitung (Final Machining), Waschen (Washing), Lecktesten +Stopfen+Diemontage (Leak Testing + Plugging + Dismantling), and Imprägnierung (Impregnation). #### 4. Text Analysis: - **Text Detected:** - "Příloha č. 5 – Schéma technologického procesu" – Appendix No. 5 – Technological Process Diagram. - Descriptions of each stage: - AF2 Schmelzen - AF5 Gießen inkl. Lagerbuchse - AF20 Strahlen - AF50 Fertigbearbeitung - AF55 Waschen - AF80 Imprägnierung (and surrounding text indicating insertion points) - AF85 Endkontrolle - Additional text: - "Počet obráběcích center je uveden schematicky" – Number of machining centers is shown schematically. - "Mimo rozsah dodávky" – Outside the scope of supply. - "Rozsah dodávky dle TZ" – Scope of supply according to TZ. #### 5. Diagram and Chart Analysis: - **Diagram Nature:** - This is a flowchart depicting sequential stages of a technological process. - The flow moves from left to right with steps within the Casting and Final Operations categories. - **Key Insights:** - The diagram clearly separates the initial and final stages, indicating a structured progression from melting raw materials to final inspection of the produced parts. #### 6. Product Analysis: - **Products Depicted:** - Various stages of a manufacturing process of a product. The stages include operations like melting, casting, processing, washing, and final inspections. #### 7. Anomaly Detection: - **Unusual Elements:** - There are no unusual elements in the flowchart. Everything appears to be systematic and logical according to standard process flow representations. #### 8. Color Analysis: - **Dominant Colors:** - The diagram primarily uses gray for most elements and blue to highlight specific stages in the process. - Green arrows are used to indicate the beginning and end of the process. - **Impact on Perception:** - The use of blue emphasizes the stages that are likely critical or included in the main scope of supply. - Green arrows provide a clear visual cue for the start and end points. #### 9. Perspective and Composition: - **Perspective:** - The diagram is presented in a top-down view, typical for flowcharts. - **Composition:** - Elements are arranged linearly from left to right to indicate the flow direction. Rectangular blocks represent different stages, connected by arrows. The layout aids in understanding the process sequence efficiently. #### 12. Graph and Trend Analysis: - **Process Flow Analysis:** - Trends show a linear progression from raw material (melting) to final inspection. - Intermediary stages include critical operations ensuring quality and coating of the parts. #### 14. Ablaufprozesse (Process Flows): - **Process Flow Description:** - The process starts with melting (AF2 Schmelzen), goes through casting (AF5 Gießen) and shot blasting (AF20 Strahlen). - Midway, the process includes final machining (AF50 Fertigbearbeitung) followed by washing (AF55 Waschen) and impregnation (AF80 Imprägnierung). - The final step is the end control (AF85 Endkontrolle). #### 15. Prozessbeschreibungen (Process Descriptions): - **Detailed Process Descriptions:** - **AF2 Schmelzen:** Melting of raw materials. - **AF5 Gießen inkl. Lagerbuchse:** Casting including bearing bush. - **AF20 Strahlen:** Shot blasting to clean surfaces. - **AF50 Fertigbearbeitung:** Final machining processes. - **AF55 Waschen:** Washing of the parts. - **Lecktesten +Stopfen+Diemontage:** Leak testing, plugging, and dismantling. - **AF80 Imprägnierung:** Impregnation process to seal pores. - **AF85 Endkontrolle:** Final quality inspection. #### 19. Tables: - **Tables Analysis:** - One notable table-like element below the diagram indicating the color coding: - Gray: Mimo rozsah dodávky (Outside the scope of supply) - Blue: Rozsah dodávky dle TZ (Scope of supply according to TZ) Overall, the image provides a clear, structured representation of a technological process, from melting raw materials to the final inspection of finished parts. The usage of color effectively highlights specific processes within the overall flow. #################### File: TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf Page: 9 Context: # Příloha č. 13 – Kapacitivní požadavky v rocích | Rok | Kapacita | |------|----------| | 2027 | 130 154 | | 2028 | 188 000 | | 2029 | 188 000 | | 2030 | 188 000 | | 2031 | 188 000 | | 2032 | 188 000 | | 2033 | 282 000 | | 2034 | 94 000 | ## Grafy - **KAPA 250AT** - **KAPA 309AT** - **Bedarf MGH** ### Poznámka - Červená čára: 232 000 Image Analysis: ### Visual Content Analysis #### Image 1 **1. Localization and Attribution:** - **Image Number**: Image 1 - **Position**: The only image on the provided page. **2. Object Detection and Classification:** - **Objects Identified**: - Bar chart - Legends indicating different capacities (KAPA 250AT, KAPA 309AT, Bedarf MGH) - X-axis and Y-axis with labeled data points **3. Scene and Activity Analysis:** - **Scene Description**: - This is a bar chart displaying capacity requirements over the years from 2027 to 2034. - Data points are highlighted for each year along with corresponding values. **4. Text Analysis:** - **Detected Text**: - Title: "Příloha č. 13 – Kapacitní požadavky v rocích" - X-axis labels: 2027 through 2034 - Y-axis labels: from 0 to 300,000 in increments of 50,000 - Detailed text within the chart: "130 154", "188 000", "282 000", "94 000", "232.000" - Legends: "KAPA 250AT", "KAPA 309AT", "Bedarf MGH" - **Content Significance**: - The text specifies capacity requirements over different years, critical for understanding the demand and supply logistics. - Legends help distinguish between the capacity lines and the actual needs (Bedarf MGH). **5. Diagram and Chart Analysis:** - **Data and Trends**: - The chart shows capacity requirements from 2027 to 2034. - There are consistent capacity requirements (188,000) from 2028 to 2032, a significant spike in 2033 (282,000), and a drop in 2034 (94,000). - **Axes, Scales, and Legends**: - **X-axis**: Represents years (2027 to 2034). - **Y-axis**: Represents capacity required, scaled from 0 to 300,000 in increments of 50,000. - **Legends**: "KAPA 250AT" (solid red line), "KAPA 309AT" (dashed red line), "Bedarf MGH" (green bars). **7. Anomaly Detection:** - **Possible Anomalies**: - A notable anomaly is the spike in capacity needs in 2033 (282,000) contrasted with the following year's dramatic drop (94,000). This sudden fluctuation might indicate an unusual or significant event affecting capacity demands. **8. Color Analysis:** - **Color Composition**: - Dominant colors include dark green for bars (Bedarf MGH), red for capacity lines (KAPA 250AT and KAPA 309AT). - The choice of dark green adds a stable and serious tone, while red highlights critical capacities. **9. Perspective and Composition:** - **Perspective**: - The chart is viewed frontally. - **Composition**: - The chart is centered, with the title at the top, the legend on the right, and the axes labeled appropriately. The design ensures clarity and easy readability. **12. Graph and Trend Analysis:** - **Analysis of Graph and Trends**: - Steady capacity requirements from 2028 to 2032. - Major increase in 2033, suggesting a peak demand. - Sharp decline in 2034, implying a sudden drop in need after the peak. **13. Graph Numbers:** - **Data Points per Year**: - 2027: 130,154 - 2028: 188,000 - 2029: 188,000 - 2030: 188,000 - 2031: 188,000 - 2032: 188,000 - 2033: 282,000 - 2034: 94,000 #################### File: MGH%20Anlage%2014%281%29.pdf Page: 1 Context: # Clamping MGH ## OP10 ![Clamping MGH Diagram](image_link_here) ### Key Features - **New Geometry**: Green indicates areas added by Skoda tool shop. ### Symbols - ⚪ Fixed part rest - ➡️ Clamp - ⚪ Location pins - ⭕ 2- and 3-jaw chucks ### Notes - Ensure to follow safety protocols when using clamping features. - Refer to the user manual for specific instructions related to Operation 10. Image Analysis: 1. **Localization and Attribution:** - This image is a single diagram depicted on the page. Therefore, it is labeled as Image 1. 2. **Object Detection and Classification:** - The image contains a 3D schematic representation of mechanical parts. There are three main 3D views of a mechanical component, possibly a Motor Gear Housing (MGH). - Key features and objects identified are: - Green-colored regions indicating new geometry added by the Skoda tool shop. - Red symbols and arrows representing different mechanical fixtures such as clamps, pins, and chucks. 3. **Scene and Activity Analysis:** - The scene in the image shows a technical illustration of mechanical components and their assembly or machining process. - The main actors are the mechanical parts and the annotations indicating the clamping and fixture points. 4. **Text Analysis:** - The text present in the image includes: - **Title:** Clamping MGH - **Subtitle:** OP10 - **Annotations:** - "New geometry that was added by Skoda tool shop" - Symbols with explanations: fixed part rest, clamp, location pins, 2- and 3-jaw chucks. - **Footer:** INTERNAL, document details including date 05.08.2024, the document identification "S3 | Clamping MGH | PPK: E | Georgy Komarov", and the Skoda logo. - This text explains the modifications, specific elements present in the assembly, and possibly references an internal guide or instruction document within Skoda. 5. **Diagram and Chart Analysis:** - The diagram shows a detailed 3D model of what appears to be a mechanical housing component from different views. - Symbols like circles, triangles, and arrows indicate various connection points, clamping positions, and rests which are probably crucial for the assembly or machining process. 6. **Product Analysis:** - The main product is the mechanical housing shown in three views. - The detailed layout shows fixtures and additions (highlighted in green) by the Skoda tool shop. - The product's construction involves complex geometry with precise positioning of clamps and pins. 7. **Anomaly Detection:** - No noticeable anomalies are detected. The annotations and additions seem to be a standard part of the technical documentation. 8. **Color Analysis:** - Dominant colors: - Green: Signifying new geometry added by Skoda. - Red: Highlighting the types of clamping and fixing elements. - The color scheme is used effectively to differentiate between types of modifications and to highlight key areas of the design. 9. **Perspective and Composition:** - The perspective includes: - A frontal view - A top view - An angled/bottom view. - The composition ensures that the viewer can clearly understand the different aspects and modifications to the component layout. 10. **Contextual Significance:** - The image likely serves as part of technical documentation, illustrating a specific stage in the machining or assembly process (OP10). - It underlines the critical points for clamping and fixture, ensuring precise manufacturing. 12. **Graph and Trend Analysis:** - There are no graphs indicating numerical data or trends in this image. 13. **Graph Numbers:** - There are no graphs with data points to list. **Additional Aspects:** - **Ablaufprozesse (Process Flows):** - The diagram implicitly shows a part of the assembly or machining process, particularly focusing on clamping and fixing. - **Typen Bezeichnung (Type Designations):** - Types of clamping components are identified: fixed part rest, clamp, location pins, and chucks. - **Trend and Interpretation:** - The trend appears to be towards modifying and enhancing components for better assembly or machining accuracy by adding new geometries. Overall, the image is a detailed technical illustration focused on the clamping features of a mechanical part, intended for use in a technical context like assembly or machining instructions. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 2 Context: # Clamping MGH ## OP20 and Following One of four part rests can be movable. - **Fixed Part Rest**: ![Fixed Part Rest](path/to/fixed_part_rest_icon) - **Clamp**: ![Clamp](path/to/clamp_icon) - **Location Pins**: ![Location Pins](path/to/location_pins_icon) - **2- and 3-Jaw Chucks**: ![Chucks](path/to/chucks_icon) ### New Geometry ![New Geometry](path/to/new_geometry_image) - New geometry that was added by Skoda tool shop. Image Analysis: ### Comprehensive Analysis of the Provided Visual Content #### 1. Localization and Attribution - **Image Position and Numbering**: - **Image 1**: Located on the left side of the page. - **Image 2**: Located on the right side of the page. #### 2. Object Detection and Classification - **Image 1** - **Objects**: Engine block, location pins, fixed part rests, clamps, new geometry (highlighted in green). - **Classification**: Mechanical parts and clamping devices used in manufacturing. - **Image 2** - **Objects**: Engine block (different angle), location pins, fixed part rests, clamps, new geometry (highlighted in green). - **Classification**: Mechanical parts and clamping devices used in manufacturing. #### 3. Scene and Activity Analysis - **Image 1**: Shows an engine block with various clamping and holding fixtures related to the manufacturing or assembly process. - **Image 2**: Another view of the engine block, highlighting different areas and possibly new geometric features added by the tool shop. #### 4. Text Analysis - **Detected Text**: - "Clamping MGH" - "OP20 and following" - "One of four part rest can be movable" - Labels for objects (fixed part rest, clamp, location pins, 2- and 3-jaw chucks) - "New geometry that was added by Skoda tool shop" - **Content Significance**: - Describes the clamping mechanism (MGH) used in a mechanical/industrial process. - Indicates the flexibility of part movement in the clamping system. - Highlights new geometric additions made by the Skoda tool shop. #### 5. Diagram and Chart Analysis - The images serve as a visual diagram illustrating the positioning and use of clamps, part rests, and location pins on the engine block during the manufacturing process. - **Axes, Scales, and Legends**: Not applicable, but meaningful symbols representing various clamping components (triangles, circles, and arrows) are used for clarity. #### 6. Product Analysis - **Engine Block**: - **Features**: Multiple points for clamping and resting, complex geometry for various attachment points. - **Materials and Colors**: Presumably metal (typical of engine blocks), highlighted areas in green indicating new additions or modifications. #### 7. Anomaly Detection - No discernible anomalies are present; the images seem to accurately represent typical clamping and manufacturing processes. #### 8. Color Analysis - **Dominant Colors**: - Grey: representing the metallic engine block. - Green: highlights new geometry added by Skoda tool shop. - Red: used for the symbols and text highlighting parts and processes, enhancing visibility and focus areas. #### 9. Perspective and Composition - **Image 1**: Side view of the engine block. - **Image 2**: Perspective view showing different angles of the engine block. - **Composition**: Balanced with text and symbols strategically placed to highlight key areas on the engine block. #### 10. Contextual Significance - The images are part of a technical document or presentation detailing the clamping process in automotive or mechanical engineering, specifically for Skoda's manufacturing line. - **Contribution**: Provides clear visual guidance and documentation for engineers and technicians working on the clamping and assembly of engine blocks. ### Additional Aspect: Ablaufprozesse (Process Flows) - **Process Significance**: The visuals depict the flow of clamping during the OP20 (operational step 20) and subsequent steps in manufacturing, indicating critical points for part fixation and necessary adjustments. ### Summary These visuals effectively communicate detailed information about the clamping process used in automotive engineering. They are educational tools aimed at professionals engaged in the operation and assembly of engine components, with specific focus on enhancements by Skoda's tool shop. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 3 Context: # Clamping MGH ## OP20 and following ![Clamping MGH](image_path_here) - **Location Pins** ![location pins icon](icon_path_here) - **2- and 3-Jaw Chucks** ![2- and 3-jaw chucks icon](icon_path_here) - **Fixed Part Rest** ![fixed part rest icon](icon_path_here) - **Clamp** ![clamp icon](icon_path_here) For location orientation, marked holes with dimension 12H7 will be used. After clamping on the holes, there can stay some "optical issues," but dimension 12H7 must be kept. Holes then are used for the positioning of the axle on the assembly line (see description of T, S datums on the drawing - clipping on the next slide). Image Analysis: ### Image Analysis #### 1. **Localization and Attribution:** - **Image 1:** - **Position**: This is a single image occupying the entire content space. - **Numbering**: This image is assigned as "Image 1." #### 2. **Object Detection and Classification:** - **Image 1:** - **Detected Objects**: - Engine component (Machinery part) - Annotations (Location pins, 2- and 3-jaw chucks, fixed part rest, clamp) - **Key Features**: - The engine component is depicted in a technical drawing style, showing various geometries and annotations. - Specific elements (new geometry) are highlighted in green. - Several geometric shapes (circles, triangles) represent different functional parts/features. #### 3. **Scene and Activity Analysis:** - **Image 1:** - **Scene**: The image shows a detailed technical diagram of an engine part with various components highlighted for clamping during machining. - **Activities**: - Technical instructions on using the clamps for location orientation. - The process involves using location pins, fixed part rests, and clamps. #### 4. **Text Analysis:** - **Image 1:** - **Extracted Text**: - "**Clamping MGH**" - "**OP20 and following**" - "**location pins**" - "**2- and 3-jaw chucks**" - "**fixed part rest**" - "**clamp**" - "**For location orientation will be used marked holes with dimension 12H7. After clamping on the holes can stay some “optical issues”, but dimension 12H7 must be kept. Holes then are used for the positioning of the axle on the assembly line (see description of T, S datums on the drawing - clipping on the next slide).**" - "**INTERNAL**" - "**SKODA**" - **Significance**: - Instructions on how to clamp and orient the part using specific tools and marked holes. #### 5. **Diagram and Chart Analysis:** - **Image 1:** - **Visual Elements**: None present. The image is a technical diagram, not a chart or graph. #### 6. **Product Analysis:** - **Image 1:** - **Product**: Engine component - **Features**: - Various geometries for clamping. - Annotation of new geometry added by Skoda tool shop marked in green. #### 7. **Anomaly Detection:** - **Image 1:** - No anomalies detected. #### 8. **Color Analysis:** - **Image 1:** - **Dominant Colors**: - Green (highlighted new geometry) - Red (annotations) - Gray (engine part) - **Impact**: - Green highlights new additions providing focus areas. - Red annotations guide the viewer to understand critical areas. #### 9. **Perspective and Composition:** - **Image 1:** - **Perspective**: Front-facing technical drawing. - **Composition**: Annotations and symbols are superimposed on the engine part to provide detailed instructions. #### 10. **Contextual Significance:** - **Image 1:** - **Context**: Part of a technical manual or instructions for assembly line workers. - **Contribution**: Provides specific details on how to orient and clamp the part during assembly. #### 11. **Metadata Analysis:** - **Image 1:** - **Date**: 05.08.2024 - **Author**: Georgy Komarov - **Document**: Clamping MGH | PPK-E | Skoda - **Contribution**: Confirms the date and authorship of the technical instruction document. #### 12. **Graph and Trend Analysis:** - **Image 1:** - Not applicable. #### 13. **Graph Numbers:** - **Image 1:** - Not applicable. ### Additional Aspects: #### Ablaufprozesse (Process Flows): - **Image 1**: - **Process Description**: Shows the use of clamping tools to position and orient engine parts accurately during assembly. #### Prozessbeschreibungen (Process Descriptions): - **Image 1**: - **Description**: Clamping process includes the use of marked holes, maintaining dimensions, and ensuring proper orientation. #### Typen Bezeichnung (Type Designations): - **Image 1**: - Not applicable. #### Trend and Interpretation: - **Image 1**: - Not applicable. #### Tables: - **Image 1**: - Not applicable. This detailed analysis covers all specified aspects related to the provided image, ensuring a comprehensive understanding of the content and its context. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 4 Context: # Clamping MGH ## OP20 and following | Item | Description | |------|----------------------------------------| | 1 | Antriebsteil (Bauform) | | 2 | Rohblock bei ST/Gehäuse | | 3 | Gerathüchsbasis/Bauform | | 4 | Hochdruck-Passstüch | | 5 | G/D Datum Stabilisierung | | 6 | Antriebsteil (Rucke) | | 7 | Antriebsteil Pass/Ausbaustelle | | 8 | Antriebsteil (Bauform) | | 9 | Antriebsteil | | 10 | Antriebsteil (Bauform) | | 11 | Antriebsteil (Bauform) | | 12 | Auswechselbare Bauform | | 13 | Antriebsteil (Rucke) | | 14 | Antriebsteil | | 15 | Antriebsteil (Bauform) | | 16 | Antriebsteil (Bauform) | | 17 | Antriebsteil (Bauform) | | 18 | Antriebsteil (Bauform) | | 19 | Antriebsteil (Bauform) | | 20 | Antriebsteil (Bauform) | 1. **Detailierte Informationen siehe** - [Technische Informationen] - [Zusatzbibliothek] 2. **Antriebsteil B** - Ingenieur: Georg Komarov - Datum: 05.08.2024 Image Analysis: ### Analysis of Attached Visual Content #### 1. Localization and Attribution - **Image Position:** Single image present. - **Image Number:** Image 1. #### 2. Object Detection and Classification - **Objects Detected:** 1. **Main Object:** Industrial machine part, likely a component of an automotive engine or transmission system. 2. **Annotations:** Label identifiers marked with alphabets (e.g., E, F, G) pointing to specific features on the object. - **Classification:** - **Category:** Mechanical component. #### 3. Scene and Activity Analysis - **Scene Description:** - The image features a detailed line drawing of a complex mechanical component. - Annotations and callouts are used to highlight particular parts and areas of interest. - **Activity:** - The image appears to be part of an instructional or documentation guide, showcasing the assembly or analysis of the component. #### 4. Text Analysis - **Detected Text:** - **Header:** "Clamping MGH OP20 and following" - **Label:** "SKODA" - **Table Content:** - Column names: `Datum`, `Description` - Rows: Various descriptions in German, including items like "Ausrichtung Bohrem." - **Highlighted Text in Table:** - "Auflagepunkt Getriebehaus- Seite" - "Auflagepunkt Motorblock Seite" - "Messpunkt Zahnleigung (Hof BSH)" - **Content Analysis:** - The header indicates the document is about "Clamping MGH." - The text associated with "SKODA" suggests that this document is related to a product or process by the car manufacturer SKODA. - The highlighted table rows emphasize critical points regarding "Auflagepunkt" (contact points) and "Messpunkt" (measurement points) which likely indicates areas requiring attention during assembly or inspection. #### 5. Diagram and Chart Analysis - There are no standard diagrams or charts present aside from the annotated mechanical drawing, which is critical for technical reference or documentation. #### 6. Product Analysis - **Product Features:** - Complex metallic structure with multiple ports and mount points. - Intricate detailing suggests parts where precision in assembly or fitting is critical. - **Material and Colors:** - The illustration is monochromatic (line drawing), typical for technical drafts. #### 7. Anomaly Detection - No anomalies detected in the technical drawing. The highlighted and marked sections appear purposeful and aligned with technical documentation standards. #### 8. Color Analysis - **Color Composition:** - Monochrome technical line drawing. - Red circles used for emphasizing specific points. #### 9. Perspective and Composition - **Perspective:** - Orthographic view, commonly used in technical drawings to provide precise depictions without perspective distortion. - **Composition:** - The central component is prominently placed with annotations and descriptions aligning to the left and right for clarity. #### 10. Contextual Significance - **Image Context:** - This image serves as a technical illustration within a document related to the assembly or maintenance of a mechanical component. - The detailed annotations imply its use for instructional or training purposes, likely aimed at engineers or technicians. ### Summary The image is a highly detailed technical drawing of a mechanical component, likely linked to automotive manufacturing, specifically by SKODA. It features key identifiers and annotations to guide assembly or inspection as part of a larger technical document. The highlighted table elements emphasize crucial contact and measurement points essential for accurate component assembly. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 5 Context: # Clamping MGH ## Remarks to clamping - Holes on the casting do not have the same axles with final machined holes on the done part. It is also relevant for indexes OP20. - Clamping pads for OP20 need to be milled to be perpendicular to indexes' axles. Image Analysis: ### Image Analysis #### 1. Localization and Attribution: - Identify and locate each image on the page: - Image 1: Top left section of the page, displaying a mechanical part with annotations. - Image 2: Bottom left section, showing a zoomed-in portion of the mechanical part. - Assign the corresponding image number to each analysis: - Image 1: Mechanical part with annotations. - Image 2: Zoomed-in portion. #### 2. Object Detection and Classification: - Image 1: - Object: Mechanical casting part. - Key Features: Various holes and clamping pads, annotated with dimensions (e.g., 13.5 mm, 103.5 mm) in green. - Image 2: - Object: Zoomed-in portion of the mechanical casting part. - Key Features: Detailed view of a section, possibly showing more intricate features relevant to clamping. #### 3. Scene and Activity Analysis: - Image 1: - Scene: Diagram of a mechanical casting part. - Activities: Dimensional analysis and annotations indicating specific measurements. - Image 2: - Scene: Close-up of a specific area of the casting part. - Activities: Focuses on a smaller section to highlight additional details relevant to clamping. #### 4. Text Analysis: - Detected Text: - Title: "Clamping MGH" - Subtitle: "Remarks to clamping" - Main Instructions: - "Holes on the casting do not have the same axles with final machined holes on the done part. It is also relevant for indexes OP20." - "Clamping pads for OP20 need to be milled to be perpendicular to indexes' axles." - Analysis: - The text indicates a technical review of the clamping process for mechanical parts. It highlights the importance of ensuring that holes on the casting align correctly with machined holes and provides specific instructions for the milling process to achieve proper alignment. #### 9. Perspective and Composition: - Perspective: - Image 1: Slightly angled side view of the mechanical part to capture dimensions and features. - Image 2: Closer, more zoomed-in perspective to focus on detailed aspects of the clamping pads. - Composition: - The main mechanical part is prominently featured with critical measurements highlighted in green. The layout is clean with clear annotations and directional arrows guiding the viewer's focus. #### 10. Contextual Significance: - The images and annotations are part of a technical review or instruction manual for ensuring proper clamping in mechanical manufacturing. It provides crucial information on the importance of alignment and milling for accurate assembly and function, contributing to the overall goal of maintaining high-quality standards in production. #### 11. Metadata Analysis: - Capture Date: 05.08.2024 - Author: Georgy Komarov - Metadata Information: It provides a timestamp and author attribution, adding context to the source and timeframe of the technical review. ### Summary The visual content provides detailed technical guidance on clamping mechanical parts, focusing on the alignment of holes and clamping pads. Critical measurements are annotated, and specific milling instructions are provided to ensure proper alignment. The imagery is designed to aid in understanding and implementing precise manufacturing processes to maintain high standards in mechanical production. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 6 Context: # BACK-UP ## Internal Document **Document Version**: S3 **Date**: 06.08.2024 **Topic**: Clamping MGH | PPK-E **Author**: Georgy Komarov **Page**: 6 --- Ensure all sections of the document adhere to this formatting structure. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 7 Context: # Clamping MGH ## Previous clamping points for OP10 ### Clamping surfaces and projections of rest pads | Status | Image | |--------|-----------------------------| | NOK | ![NOK Image](path/to/nok_image.jpg) | | OK | ![OK Image](path/to/ok_image.jpg) | | NOK | ![NOK Image](path/to/another_nok_image.jpg) | Image Analysis: ### Image Analysis #### 1. Localization and Attribution - **Image Numbering:** - **Image 1:** Located at the leftmost position. - **Image 2:** Located in the middle. - **Image 3:** Located at the rightmost position. #### 2. Object Detection and Classification - **Image 1:** - **Objects Detected:** - Mechanical part (likely a component of an automobile engine or a similar machinery). - Clamping surface (highlighted in green). - Rest pad projection (highlighted in green). - **Classification:** Industrial machinery components. - **Key Features:** Green highlights indicating clamping surfaces and projections, caption indicating this setup is "NOK" (not okay). - **Image 2:** - **Objects Detected:** - Similar mechanical part but with different clamping surfaces and projections (also highlighted in green). - **Classification:** Industrial machinery components. - **Key Features:** Green highlights indicating clamping surfaces and projections, caption indicating this setup is "OK" (okay). - **Image 3:** - **Objects Detected:** - Another mechanical part with clamping surfaces and projections (highlighted in green). - **Classification:** Industrial machinery components. - **Key Features:** Green highlights indicating clamping surfaces and projections, caption indicating this setup is "NOK" (not okay). #### 3. Scene and Activity Analysis - **Image 1:** - **Scene Description:** A close-up view of a mechanical part showcasing clamping surfaces and projections. - **Activities:** The image seems to be highlighting the areas where clamping can occur, marking them as not suitable for the task ("NOK"). - **Image 2:** - **Scene Description:** A close-up view of a similar mechanical part but with different clamping points. - **Activities:** This image highlights areas that are suitable for clamping ("OK"). - **Image 3:** - **Scene Description:** Similar to the first image, it shows a mechanical part and indicates clamping surfaces. - **Activities:** This image also marks the areas as not suitable for clamping ("NOK"). #### 4. Text Analysis - **Detected Text:** - Title: "Clamping MGH" - Sub-heading: "Previous clamping points for OP10" - Main Body: "Clamping surfaces and projections of rest pads" - Captions: "NOK" (Image 1 and Image 3), "OK" (Image 2) - Footer: "S3 | 05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov" - Company: "SKODA" - Watermark/Note: "INTERNAL" - **Content Analysis:** - The text provides context on the images, indicating that they are related to mechanical clamping points in a manufacturing or assembly process. - "NOK" and "OK" are shorthand for "Not OK" and "OK", indicating which clamping points are acceptable. - Footer information likely includes a project code, date, and responsible person (Georgy Komarov), implying a formal presentation or document. #### 8. Color Analysis - **Color Composition:** - **Dominant Colors:** Green (highlighting clamping surfaces and projections), Red (directional arrows), Grey (background mechanical parts). - **Impact on Perception:** The green highlights effectively draw attention to the clamping surfaces. Red arrows distinctly indicate direction or focus areas and highlight action points. #### 9. Perspective and Composition - **Perspective:** All images are close-ups, providing a detailed view of specific areas of the mechanical parts. - **Composition:** Each image is structured to highlight the clamping surfaces and projections. Green highlights and red arrows are used to direct attention to specific features, while labels ("NOK" and "OK") clearly indicate the evaluation of clamping suitability. #### 10. Contextual Significance - The images serve a technical purpose, likely within a manufacturing or quality control context, to convey acceptable and unacceptable clamping points for a mechanical part. - The use of "NOK" and "OK" helps in quick identification and understanding for the intended audience, facilitating efficient communication of technical standards. ### Conclusion These images likely form part of an internal technical document or presentation aimed at illustrating and evaluating clamping points for a mechanical component, potentially in an automotive manufacturing environment (indicated by the presence of SKODA branding). The use of color coding and directional arrows enhances clarity, making it easy to understand and assess the information presented. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 8 Context: # Clamping MGH ## New clamping points for OP10 ### Clamping surfaces and projections of rest pads | Image | Status | |-------|--------| | ![Clamping Point 1](link_to_image_1) | OK | | ![Clamping Point 2](link_to_image_2) | OK | | ![Clamping Point 3](link_to_image_3) | OK | --- **Note**: Ensure that you replace `link_to_image_1`, `link_to_image_2`, and `link_to_image_3` with the actual links to the images referenced in the diagrams. Image Analysis: ### Comprehensive Examination: #### 1. Localization and Attribution: - The page contains a single set of images which are grouped together. - Numbering: - Image 1: Far left image - Image 2: Center image - Image 3: Far right image #### 2. Object Detection and Classification: - **Image 1:** - Objects: Mechanical components including a clamping rest pad depicted in green and a clamping point marked by a red arrow. - Key Features: The rest pad is highlighted in green, with clamping surfaces and projections clearly marked. - **Image 2:** - Objects: Mechanical components including another clamping rest pad depicted in green and a clamping point marked by a red arrow. - Key Features: Similar to Image 1, the rest pad and clamping point are clearly marked. - **Image 3:** - Objects: Mechanical components including a clamping rest pad depicted in green and a clamping point marked by a red arrow. - Key Features: Similar to Images 1 and 2, with the rest pad and clamping point distinctly highlighted. #### 3. Scene and Activity Analysis: - **Image 1:** - Scene: Close-up view of a mechanical assembly, focusing on the clamping area. - Activity: Highlighting new clamping points for OP10 (Operation 10) and depicting the clamping surfaces. - **Image 2:** - Scene: Another close-up view of the mechanical assembly similar to Image 1. - Activity: Focus on a different section of the clamping area within the same assembly. - **Image 3:** - Scene: Close-up view of another section of the mechanical assembly. - Activity: Similar to the previous images, showcasing clamping surfaces for another section of the component. #### 4. Text Analysis: - Text Detected: - Title: "Clamping MGH" - Subtitle: "New clamping points for OP10" - Description: "Clamping surfaces and projections of rest pads" - Each image has "OK" indicating that the clamping points are correctly identified. - Footer information includes the text "INTERNAL," document ID, author name (Georgy Komarov), and the logo "SKODA." - Significance: The text provides context, describing the purpose of the images and confirming the correctness of the identified points with "OK." ### Contextual Significance: - The images and the accompanying text are part of an internal technical document likely aimed at engineers or technicians. The document details changes or updates in the clamping points for a specific operation (OP10) in the assembly of mechanical components. ### Summary: The provided images and text describe new clamping points for a mechanical operation in an automotive context (likely related to SKODA). Detailed close-ups focus on the correct positioning of the clamping surfaces, confirming their accuracy (marked as "OK"). The visuals highlight new clamping surfaces and projections, thus providing clear guidance for the assembly or inspection process. #################### File: MGH%20Anlage%2014%281%29.pdf Page: 9 Context: # Clamping MGH ## Clamping point 4 in OP20 ![Clamping Point 4](image_link_here) ### Projection of Rest Pad - Clamping point details: - Clamping point number: 4 - Operation: OP20 **Diagram Description:** - The diagram displays the clamping point along with the projection of the rest pad. | Element | Description | |-----------------------|---------------------------------| | Clamping Point | 4 | | Operation | OP20 | | Projected Element | Rest Pad | **Notes:** - Ensure all dimensions and specifications are verified against project standards. - Follow the internal guidelines for clamping protocols. --- *Document Reference:* S3 | 05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov *INTERNAL* Image Analysis: ### Image Analysis #### 1. Localization and Attribution - The visual content comprises two primary images placed side by side. - **Image 1**: Located on the left side of the page. - **Image 2**: Located on the right side of the page. #### 2. Object Detection and Classification - **Image 1**: - **Primary Object**: A detailed technical illustration of an engine or mechanical component. - **Key Features**: - Several engine parts, possibly including cylinders and multiple connectors. - Highlighted section marked with green color indicating a specific area of interest. - Overlaid with red arrows pointing towards significant parts. - **Image 2**: - **Primary Object**: Another technical illustration, likely a different angle or part of the same component shown in Image 1. - **Key Features**: - Similar detailed technical structure with multiple layers. - Annotations in white boxes providing measurements or descriptive text. - Superimposed green coloring indicating areas of focus. #### 3. Scene and Activity Analysis - **Image 1**: - **Scene Description**: - This appears to be a technical diagram showing the clamping mechanism of a mechanical part. - The rest pad's projection is indicated using red arrows for emphasis. - **Activity**: - No physical activity, purely an illustration meant for engineering or educational purposes. - **Image 2**: - **Scene Description**: - Continuation or complementary technical illustration to Image 1. - Detailed annotations possibly explaining the mechanical features or specifications. - **Activity**: - Same as Image 1, technical illustration with annotations for clarity. #### 4. Text Analysis - **Image 1** (Annotations): - "Projection of rest pad" indicated by the text next to the arrows. - This suggests a specific engineering focus on the positioning or role of the rest pad. - **General Text**: - "Clamping MGH" - "Clamping point 4 in OP20" - "Projection of rest pad" - Footer text indicating the date and author: "05.08.2024 | Clamping MGH | PPK-E | Georgy Komarov" This text outlines the document's focus on clamping mechanisms in a technical or engineering context, specifically at a clamping point within a specified operation (OP20). #### 8. Color Analysis - **Dominant Colors**: - **Image 1**: Predominantly green highlights with complementing gray-scale parts. - Red arrows used for highlighting key points. - **Image 2**: Green overlay for sections of interest. - General background of technical gray-blue hues. - **Impact on Perception**: - The use of green and red colors draws attention to critical areas and emphasizes specific parts, effectively guiding the viewer's focus on essential elements of the engineering diagrams. #### 9. Perspective and Composition - **Perspective**: - **Image 1**: Side perspective view showing detailed cross-section structures of a mechanical part. - **Image 2**: Perspective likely from above or angled to provide a planar view focusing on specific elements. - **Composition**: - Each image is centered and occupies a balanced space on the document. - Text annotations strategically placed to avoid overlapping key diagram parts, ensuring clarity. #### 12. Graph and Trend Analysis - **Graph/Chart Trend**: - No specific graphs or charts are depicted in the provided images. ### Conclusion The provided visual content represents detailed technical illustrations focusing on clamping mechanisms within an industrial or engineering setting. Annotations and highlighting effectively communicate important aspects and specific parts of interest. The textual information supplements the diagrams by indicating specific components or processes, making the document suitable for internal technical discussions or educational purposes. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt%281%29.pdf Page: 1 Context: # FFG ## Skoda SSP Motorgehäuse (MGH) Automation **Date:** 2024-09-13 **Presenter:** Ralf Haug --- ### Partners - VDF Boehringer - CORCOM - DMC - Feeler - Hessapp - IMRS - JOBS - Leadwell - AG - Meccanodora - Morara - Pfiffner - Ramboldi - Sachman - Sigma - SMS - SNK - Tacchella - Witzig & Frank --- Image Analysis: ### Analysis of Attached Visual Content #### Image Localization and Attribution - **Image 1:** The visual content consists of a single image located centrally on the page. #### Object Detection and Classification - **Image 1:** - **Objects Detected:** Industrial manufacturing layout, various brand logos, and text. - **Classification:** - **Textual Content:** Indicates the title, date, and author of the presentation. - **Industrial Layout:** Detailed representation of an automation system. - **Brand Logos:** Multiple logos of companies associated with the presentation. #### Scene and Activity Analysis - **Image 1:** - **Scene Description:** The image portrays a 3D blueprint-style layout of an industrial automation system. - **Activities:** No dynamic activities are explicitly shown, but the context implies automation and manufacturing processes for automotive components, specifically motor housing. #### Text Analysis - **Image 1:** - **Detected Text:** - "Skoda SSP Motorgehäuse (MGH) Automation" - "2024-09-13, Ralf Haug" - **Content Significance:** - **Title:** Indicates that the presentation focuses on the automation of Skoda SSP motor housing production. - **Date and Author:** Specifies the date (September 13, 2024) and the author (Ralf Haug). #### Diagram and Chart Analysis - **Image 1:** - **Diagram:** The 3D layout diagram represents the automation system for motor housing production. - **Insights:** - The diagram likely details the spatial arrangement and machinery involved in the automation process. #### Product Analysis - **Image 1:** - **Products Depicted:** Various industrial machines and systems. - **Main Features:** - Complex, interconnected layout suggesting a sophisticated automation process. - Industrial machines depicted in a blueprint format. - **Materials and Colors:** Dominantly teal-green color to evoke a technical and modern aesthetic. #### Anomaly Detection - **Image 1:** - **Noticeable Elements:** - The highly detailed 3D industrial layout in a blueprint style is a notable element. - Lack of real human elements could affect personal relatability. #### Color Analysis - **Image 1:** - **Dominant Colors:** Shades of teal and green. - **Impact on Perception:** - These colors give a modern, technical feel. - Teal can evoke feelings of calmness and clarity, while green often represents growth and innovation. #### Perspective and Composition - **Image 1:** - **Perspective:** Bird’s eye view. - **Composition:** - The image is divided into the top part, containing the industrial layout, and the bottom part, which includes textual information and brand logos. - Balanced layout ensuring the industrial design draws initial attention, followed by a coherent flow to the textual elements. #### Contextual Significance - **Image 1:** - **Contribution to Overall Message:** - The image emphasizes the technical prowess and detailed planning involved in automating motor housing production. - Branding elements suggest a collaborative effort among multiple companies in this automation project. #### Additional Aspects to Include - **Ablaufprozesse (Process Flows):** - The blueprint layout hints at a detailed and systematic workflow involved in the manufacturing process. - Industrial automation processes likely entail sequential operations essential for efficient production. - **Prozessbeschreibungen (Process Descriptions):** - The image suggests an integrated manufacturing process for motor housings, incorporating multiple stages of automation technology. - **Typen Bezeichnung (Type Designations):** - Various brands associated with automation technology, implying a multidisciplinary approach to the manufacturing process. ### Summary This single image presents a comprehensive overview of an industrial automation system for motor housing production, highlighting the technical complexity and collaborative efforts of multiple brands. The teal-green color scheme reinforces the modern, technical aesthetic, while the detailed layout underlines the precision and systematic nature of the automated processes involved. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt%281%29.pdf Page: 2 Context: # Projektdaten ## Kunde: Skoda, Mlada Boleslav ## Werkstück: Motorgehäuse (MGH) SSP ## Taktzeit: 75s ## Terminplan: siehe Folgeseite ## RFQ Dokumente: - Skoda Lastenheft - TZ_Linka obrabeni motorove skrine elektrophonou SSP v5_DE ## Others: ### Kontakt MAG EK: Sonja Haas; [sonja.haas@mag-ias.com](mailto:sonja.haas@mag-ias.com) ### Kontakt MAG Planung: Ralf Haug; [ralf.haug@mag-ias.com](mailto:ralf.haug@mag-ias.com) Image Analysis: ### Image Analysis: #### 1. **Localization and Attribution:** - This image is the only one present and hence will be referred to as **Image 1**. #### 2. **Object Detection and Classification:** - **Objects Identified:** - Text - Logos - **Key Features:** - The image primarily contains textual information along with two logos positioned at the top-right corner. #### 4. **Text Analysis:** - **Detected Text:** ``` Projektdaten Kunde: Skoda, Mlada Boleslav Werkstück: Motorgehäuse (MGH) SSP Taktzeit: 75s Terminplan: siehe Folgeseite RFQ Dokumente: Skoda Lastenheft TZ_Linka obrabeni motorove skrine elektropohonu SSP v5_DE Others Kontakt MAG EK Sonja Haas; sonja.haas@mag-ias.com Kontakt MAG Planung Ralf Haug, ralf.haug@mag-ias.com ``` - **Analysis of Text Content:** - **Projektdaten (Project Data):** The content provides detailed information regarding a project related to Skoda. - **Kunde (Customer):** Skoda, located in Mlada Boleslav. - **Werkstück (Workpiece):** A motor housing for MGH SSP. - **Taktzeit (Cycle Time):** 75 seconds. - **Terminplan (Schedule):** Further details are available on the next page. - **RFQ Dokumente (RFQ Documents):** Reference to a specific document regarding Skoda’s requirements and specifications. - **Others Section:** - Contact information for Sonja Haas and Ralf Haug from MAG. #### 6. **Product Analysis:** - **Products Depicted:** - No specific products are shown in the image; it focuses on textual project data. #### 8. **Color Analysis:** - **Dominant Colors:** - Primary colors present are shades of green and blue, giving a professional and clean look. - The red text “vorab” stands out and indicates something preliminary or provisional. #### 9. **Perspective and Composition:** - **Perspective:** - The image is a straightforward, flat view typical of a slide or document. - **Composition:** - Organized in a clean, well-structured layout with headers and detailed segments. #### 10. **Contextual Significance:** - **Contribution:** - The image seems to be part of a presentation or document providing key information about a project for Skoda. It gives an overview of project specifics including customer, workpiece, cycle time, scheduling, and key contacts. #### 12. **Graph and Trend Analysis:** - There are no graphs or trends presented in the image. ### Summary: This analysis focuses on the content displayed in the image, presenting detailed project information about Skoda. Categories such as customer details, workpiece specifics, cycle time, schedule, relevant documents, and contact information for key personnel have been highlighted. This carefully structured layout and the use of color aid in emphasizing key details effectively. #################### File: 240910_Skoda_Automation_MGH_Portal_direkt%281%29.pdf Page: 3 Context: # Werkstück ## Gussteil ![Gussteil](URL_TO_IMAGE) ## Bearbeitetes Teil ![Bearbeitetes Teil](URL_TO_IMAGE) ### Technische Daten | Bauteil | Motorgehäuse SSP HA L43-4 | |-------------------|-----------------------------------| | Zeichnungsnummer | 0CA.90.1708 | | Gewicht des bearbeiteten Teils | 14.875 kg (könnte je nach Länge 0.369 kg) | | Rohdichte | 1.86 kg/m³ | | Material | Gehäuse DIN 1681 - 3.4600 - A5.1C3 (Fe) | | Lagerbohrungen | DIN 7061 A, DIN 39030-SINT-D11 | | Grundfarbe | siehe Zeichnung | ![Technische Zeichnung](URL_TO_TECHNICAL_DRAWING) **Datum:** 13.09.2024 **Firma:** Skoda SSP MGH Automation **Firma 2:** VDF BOEHRINGER **Firma 3:** MAG --- *Hinweis: Alle Abbildungen und technischen Daten stammen aus internen Quellen und Zeichnungen.* Image Analysis: **Localization and Attribution:** - **Image Positioning:** - Image 1: Located on the left - Image 2: Located in the middle - Image 3: Located on the right - Text Block and Table: Positioned below the images **Object Detection and Classification:** - **Image 1:** - Object: Cast part (Gussteil) - Category: Mechanical component - Key Features: Metallic appearance, rough surface texture, multiple cylindrical sections, complex geometry - **Image 2:** - Object: Finished part (Bearbeitetes Teil) - Category: Mechanical component - Key Features: Same shape as the cast part, but with smoother surfaces and additional modifications marked in blue - **Image 3:** - Object: Technical drawing of the part - Category: Engineering diagram - Key Features: Detailed line drawing, various annotations and labels pointing to different parts of the component **Text Analysis:** - **Detected Text:** - Titel: "Werkstück" - Labels: "Gussteil", "Bearbeitetes Teil" - Table Content: - "Bauteil: Motorgehäuse SSF HA LK 3-4" - "Zeichnungsnummer: 09A.907.108" - "Gewicht des bearbeiteten Teils: 14.375 kg lang (davor ca 15 kg)" - "Rohteilgewicht: ca 16 kg" - "Material: Gehäuse 09A 901 108 Serie A Fe - EN AC-AlSi9Cu3" - "Lagerbuchse: 09A 901 121 A - DIN 3909-SINDT-DN-11" - "Bemerkungen: siehe Zeichnung" - **Significance:** - The text identifies the parts shown, their material properties, weights, and technical specifications, providing necessary background for understanding the components depicted. **Diagram and Chart Analysis:** - **Technical Drawing Analysis (Image 3):** - Features various views of the mechanical component - Annotations likely point to key dimensions and sections significant for manufacturing or inspection - Helps in understanding the precise engineering details and dimensions of the component **Product Analysis:** - **Mechanical Components (Image 1 & 2):** - **Materials:** Likely metallic, identified as EN AC-AlSi9Cu3 (an aluminum-silicon alloy) - **Colors:** Silver/grey metallic colors with blue highlights in the processed part (Bearbeitetes Teil) indicating modifications or areas of interest - **Comparison:** - The cast part (Image 1) is rougher and unrefined compared to the processed part (Image 2), which features a smoother finish and highlighted sections indicating additional processing **Anomaly Detection:** - **Potential Anomalies:** - No visible anomalies or unusual elements detected in the images. **Color Analysis:** - **Dominant Colors:** - Silver/grey metallic colors dominate the images, contributing to an industrial and technical theme. **Perspective and Composition:** - **Perspective:** - All images are taken from an angled view to show the 3D nature of the parts. - The technical drawing is presented in an orthogonal view, typical of engineering diagrams. - **Composition:** - The images are arranged in a triptych format: side-by-side placement of the cast part, processed part, and technical drawing, ensuring clarity and easy comparison. **Contextual Significance:** - **Document Context:** - Likely part of a technical document or presentation by Skoda SSP MGHI Automation, possibly related to manufacturing or quality control processes for an automotive component. - **Contribution:** - The images, combined with the text and table, provide a comprehensive overview of a specific automotive part from raw casting to finished product, serving to inform readers about the component's specifications and differences between manufacturing stages. ########## """QUERY: Wann soll das FLT Angebot an den Kunden oder Endkunden abgegeben werden? Wann wird eine Bestellung vom Endkunden an den Kunden erwartet? Wann wird die Bestellung vom Kunden/Endkunden an FLT erwartet Wann erfolgt die Lieferung an Kunden und/oder Endkunden? Wann beginnt die Montage und Installation beim Kunden? Wann beginnt die Montage und Installation beim Endkunden? Wann beginnt die Inbetriebnahme beim Kunden? Wann beginnt die Inbetriebnahme beim Endkunden? Wann erfolgt die betriebsbereite Übergabe der Anlage? Wann erfolgt die Endabnahme? Bitte liste tabellarisch auf. Falls keine Antworten vorhanden dann folgende Antworten auswerfen "nicht spezifiziert"""" Consider the chat history for relevant information. Use all information included. Use as much tokens as needed. Important: If you find information separated by a | in the context, it is a table formatted in Markdown.Important: Take a look at the QUERY and only the QUERY. If this is vague or unclear, please ignore everything and ask a follow-up question instead! Final Files Sources: 0qa_901_108-sspha_mg_ftz%281%29.pdf - Page 2, Interni%20smernice%20-%20komponenty%20SZ_DE%281%29.pdf - Page 1, Interni%20smernice%20-%20komponenty%20SZ_DE%281%29.pdf - Page 3, Interni%20smernice%20-%20komponenty%20SZ_DE%281%29.pdf - Page 4, Anfrage%20Mail.pdf - Page 1, Anfrage%20Mail.pdf - Page 2, MGH%20Anlage%2014.pdf - Page 1, MGH%20Anlage%2014.pdf - Page 2, MGH%20Anlage%2014.pdf - Page 3, MGH%20Anlage%2014.pdf - Page 4, MGH%20Anlage%2014.pdf - Page 5, MGH%20Anlage%2014.pdf - Page 6, MGH%20Anlage%2014.pdf - Page 7, MGH%20Anlage%2014.pdf - Page 8, MGH%20Anlage%2014.pdf - Page 9, Standardanschreiben%281%29.pdf - Page 1, Standardanschreiben%281%29.pdf - Page 2, Standardanschreiben%281%29.pdf - Page 3, Interni%20smernice%20-%20komponenty%20SZ_DE.pdf - Page 1, Interni%20smernice%20-%20komponenty%20SZ_DE.pdf - Page 2, Interni%20smernice%20-%20komponenty%20SZ_DE.pdf - Page 3, Interni%20smernice%20-%20komponenty%20SZ_DE.pdf - Page 4, VW%2010130_CS.pdf - Page 1, VW%2010130_CS.pdf - Page 2, VW%2010130_CS.pdf - Page 3, VW%2010130_CS.pdf - Page 4, VW%2010130_CS.pdf - Page 5, VW%2010130_CS.pdf - Page 6, VW%2010130_CS.pdf - Page 7, VW%2010130_CS.pdf - Page 8, VW%2010130_CS.pdf - Page 9, VW%2010130_CS.pdf - Page 10, VW%2010130_CS.pdf - Page 11, VW%2010130_CS.pdf - Page 12, VW%2010130_CS.pdf - Page 13, VW%2010130_CS.pdf - Page 14, VW%2010130_CS.pdf - Page 15, VW%2010130_CS.pdf - Page 16, VW%2010130_CS.pdf - Page 17, VW%2010130_CS.pdf - Page 18, VW%2010130_CS.pdf - Page 19, VW%2010130_CS.pdf - Page 20, VW%2010130_CS.pdf - Page 21, VW%2010130_CS.pdf - Page 22, VW%2010130_CS.pdf - Page 23, VW%2010130_CS.pdf - Page 24, VW%2010130_CS.pdf - Page 25, VW%2010130_CS.pdf - Page 26, VW%2010130_CS.pdf - Page 27, VW%2010130_CS.pdf - Page 28, VW%2010130_CS.pdf - Page 29, VW%2010130_CS.pdf - Page 30, VW%2010130_CS.pdf - Page 31, VW%2010130_CS.pdf - Page 32, VW%2010130_CS.pdf - Page 33, VW%2010130_CS.pdf - Page 34, VW%2010130_CS.pdf - Page 35, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 1, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 2, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 3, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 4, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 5, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 6, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 7, 240910_Skoda_Automation_MGH_Portal_direkt.pptx - Page 8, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 1, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 2, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 3, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 4, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 5, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 6, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 7, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 8, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 9, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE.pdf - Page 10, Standardanschreiben.pdf - Page 1, Standardanschreiben.pdf - Page 2, Standardanschreiben.pdf - Page 3, Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf - Page 1, Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf - Page 2, Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf - Page 3, Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf - Page 4, Interni%20smernice%20-%20komponenty%20SZ_CZ%281%29.pdf - Page 5, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 1, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 2, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 3, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 4, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 5, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 6, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 7, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 8, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 9, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5_DE%281%29.pdf - Page 10, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 1, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 2, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 3, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 4, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 5, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 6, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 7, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 8, TZ_Linka%20obrabeni%20motorove%20skrine%20elektropohonu%20SSP%20v5%281%29.pdf - Page 9, MGH%20Anlage%2014%281%29.pdf - Page 1, MGH%20Anlage%2014%281%29.pdf - Page 2, MGH%20Anlage%2014%281%29.pdf - Page 3, MGH%20Anlage%2014%281%29.pdf - Page 4, MGH%20Anlage%2014%281%29.pdf - Page 5, MGH%20Anlage%2014%281%29.pdf - Page 6, MGH%20Anlage%2014%281%29.pdf - Page 7, MGH%20Anlage%2014%281%29.pdf - Page 8, MGH%20Anlage%2014%281%29.pdf - Page 9, 240910_Skoda_Automation_MGH_Portal_direkt%281%29.pdf - Page 1, 240910_Skoda_Automation_MGH_Portal_direkt%281%29.pdf - Page 2, 240910_Skoda_Automation_MGH_Portal_direkt%281%29.pdf - Page 3 ================================================== **Elapsed Time: 0.00 seconds** ================================================== FINAL ANSWER Answer: ## Zeitplan | Ereignis | Datum | |----------------------------------------------|-------------| | FLT Angebot an den Kunden/Endkunden abgeben | nicht spezifiziert | | Bestellung vom Endkunden an den Kunden erwarten | nicht spezifiziert | | Bestellung vom Kunden/Endkunden an FLT erwarten | nicht spezifiziert | | Lieferung an Kunden und/oder Endkunden erfolgen | nicht spezifiziert | | Montage und Installation beim Kunden beginnen | nicht spezifiziert | | Montage und Installation beim Endkunden beginnen | nicht spezifiziert | | Inbetriebnahme beim Kunden beginnen | nicht spezifiziert | | Inbetriebnahme beim Endkunden beginnen | nicht spezifiziert | | Betriebsbereite Übergabe der Anlage erfolgen | nicht spezifiziert | | Endabnahme erfolgen | nicht spezifiziert | ================================================== **Elapsed Time: 7.90 seconds** ==================================================